Products

2.4856 Pipes
Home > Products > Pipes

We could produce 2.4856 pipes,EN 2.4856 pipes,2.4856 seamless pipes,2.4856 welded pipes,2.4856 boiler pipes, 2.4856 heat exchanger pipes,2.4856 Capillary pipes,EN 2.4856 Thermocouple pipes,2.4856 Superheater pipes and reheater pipes,2.4856 condenser pipe,2.4856 finned pipes,EN 2.4856 furnace pipes,2.4856 instrumentation pipes,2.4856 Evaporator pipes,2.4856 honed pipes,EN 2.4856 coiled pipes,2.4856 Precision pipes,2.4856 High pressure pipes,2.4856 hydraulic pipes from china

The outer diameter of 2.4856 pipes that we could do is from 0.4MM to 850MM,The thickness of 2.4856 that we could do is from 0.12MM to 100MM

We could meet size tolerance for 2.4856 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of EN 2.4856 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of 2.4856 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

2.4856  is a nonmagnetic, corrosion and oxidation resistant, nickel-base alloy.


The chemical composition of 2.4856 pipes is as follows

Chemical Composition, %

Cr

Ni

Mo

Co + Nb

Ta

Al

Ti

C

20.00-30.00

Remainder

8.0-10.0

1.0 max

3.15-4.15

.40 max

.40 max

.10 max

Fe

Mn

Si

P

S

5.0 max

.50 max

.50 max

.015 max

.015 max


The mechanical propery of EN 2.4856 seamless pipes is as follows

0.2%  proof stress
 (KSI)

Tensile  strength
 (KSI)

Elongation
 (%)

Hardness
 (HRB)

≥ 40

≥ 100

≥ 30


As per heat treatment of 2.4856 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of 2.4856 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce 2.4856 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of 2.4856 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of 2.4856 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our 2.4856 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our 2.4856 seamless pipe and weled pipes are widely used in many industry :Hydro-carbon industries,Electronics & electrical companies,Fertilizers manufacturing companies,Chemical industries,Steel pipes manufacturing industries,Construction companies,Gas processing units,Pharmaceutical drugs manufacturing companies,Oil drilling companies and so on


Our 2.4856 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of 2.4856 pipes that you need, we are glad to quote the best price for your side

Except 2.4856 pipes,we also could produce 2.4856 flanges,2.4856 plates,2.4856 fastener,2.4856 bolts,2.4856 fittings,2.4856 bars,2.4856 tubes,2.4856 springs