Products

2.4642 Pipes
Home > Products > Pipes

We could produce 2.4642 pipes,EN 2.4642 pipes,2.4642 seamless pipes,2.4642 welded pipes,2.4642 boiler pipes, 2.4642 heat exchanger pipes,2.4642 Capillary pipes,EN 2.4642 Thermocouple pipes,2.4642 Superheater pipes and reheater pipes,2.4642 condenser pipe,2.4642 finned pipes,EN 2.4642 furnace pipes,2.4642 instrumentation pipes,2.4642 Evaporator pipes,2.4642 honed pipes,EN 2.4642 coiled pipes,2.4642 Precision pipes,2.4642 High pressure pipes,2.4642 hydraulic pipes from china

The outer diameter of 2.4642 pipes that we could do is from 0.4MM to 850MM,The thickness of 2.4642 that we could do is from 0.12MM to 100MM

We could meet size tolerance for 2.4642 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of EN 2.4642 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of 2.4642 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

2.4642 has the highest chromium content (29% Cr) among nickel alloys suitable for fabrication of pressure equipment, which confers exceptional resistance to oxidizing media.  


The chemical composition of 2.4642 pipes is as follows

Element

Content (%)

Chromium

27-31

Iron

7-11

Silicon

0.5 max

Manganese

0.5 max

Copper

0.5 max

Silicon

0.5 max

Carbon

0.05 max

Sulfur

0.015 max

Nickel

Remainder


The mechanical propery of EN 2.4642 seamless pipes is as follows

MECHANICAL PROPERTIES

solution  annealed

2.4642

Tensile  Strength(KSI)

≥  86

Yield  Strength (KSI)

≥  35

A  (%)

≥  30


As per heat treatment of 2.4642 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of 2.4642 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce 2.4642 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of 2.4642 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of 2.4642 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our 2.4642 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our 2.4642 seamless pipe and weled pipes are widely used in many industry :chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.control, pulp and paper production, and treatment of industrial and municipal waste and so on


Our 2.4642 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of 2.4642 pipes that you need, we are glad to quote the best price for your side

Except 2.4642 pipes,we also could produce 2.4642 flanges,2.4642 plates,2.4642 fastener,2.4642 bolts,2.4642 fittings,2.4642 bars,2.4642 tubes,2.4642 springs