Products

2.4606 Pipes
Home > Products > Pipes

We could produce 2.4606 pipes,EN 2.4606 pipes,2.4606 seamless pipes,2.4606 welded pipes,2.4606 boiler pipes, 2.4606 heat exchanger pipes,2.4606 Capillary pipes,EN 2.4606 Thermocouple pipes,2.4606 Superheater pipes and reheater pipes,2.4606 condenser pipe,2.4606 finned pipes,EN 2.4606 furnace pipes,2.4606 instrumentation pipes,2.4606 Evaporator pipes,2.4606 honed pipes,EN 2.4606 coiled pipes,2.4606 Precision pipes,2.4606 High pressure pipes,2.4606 hydraulic pipes from china

The outer diameter of 2.4606 pipes that we could do is from 0.4MM to 850MM,The thickness of 2.4606 that we could do is from 0.12MM to 100MM

We could meet size tolerance for 2.4606 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of EN 2.4606 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of 2.4606 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

2.4606  is a single-phase, nickel-chromium-molybdenum, tungsten alloy designed for outstanding corrosion resistance in a wide range of environments.  


The chemical composition of 2.4606 pipes is as follows

Ni..............................balance
Cr...........................19.0-23.0
Fe...............................≤2.0
Mo...........................15.0-17.0
Ti............................0.02-0.25
W...............................3.0-4.4
C................................≤0.01
Mn...............................≤0.75
S................................≤0.02
Si...............................≤0.08
P................................≤0.04


The mechanical propery of EN 2.4606 seamless pipes is as follows

Properties

Imperial

Tensile strength

104700 psi

Yield strength (@strain 0.200%)

52800 psi

Elongation at break

71%


As per heat treatment of 2.4606 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of 2.4606 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce 2.4606 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of 2.4606 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of 2.4606 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our 2.4606 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our 2.4606 seamless pipe and weled pipes are widely used in many industry :Petrochemical,Capital equipment,Energy,Shipping & Offshore industry,Mining industry,Cement industry,Paper industry,Metalworking industry and so on


Our 2.4606 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of 2.4606 pipes that you need, we are glad to quote the best price for your side

Except 2.4606 pipes,we also could produce 2.4606 flanges,2.4606 plates,2.4606 fastener,2.4606 bolts,2.4606 fittings,2.4606 bars,2.4606 tubes,2.4606 springs