We could produce 1.4876 pipes,EN 1.4876 pipes,1.4876 seamless pipes,1.4876 welded pipes,1.4876 boiler pipes, 1.4876 heat exchanger pipes,1.4876 Capillary pipes,EN 1.4876 Thermocouple pipes,1.4876 Superheater pipes and reheater pipes,1.4876 condenser pipe,1.4876 finned pipes,EN 1.4876 furnace pipes,1.4876 instrumentation pipes,1.4876 Evaporator pipes,1.4876 honed pipes,EN 1.4876 coiled pipes,1.4876 Precision pipes,1.4876 High pressure pipes,1.4876 hydraulic pipes from china

The outer diameter of 1.4876 pipes that we could do is from 0.4MM to 850MM,The thickness of 1.4876 that we could do is from 0.12MM to 100MM

We could meet size tolerance for 1.4876 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of EN 1.4876 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of 1.4876 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

1.4876 is used in a variety of applications involving exposure to corrosive environments and high temperatures.

The chemical composition of 1.4876 pipes is as follows

Table 2 - Limiting Chemical Composition, %

Nickel ..................................................................................30.0-35.0

Chromium............................................................................19.0-23.0

Iron.......................................................................................39.5min.

Carbon................................................................................0.10max.

Manganese.........................................................................1.50max.

Sulfur ................................................................................0.015max.

Silicon...................................................................................1.0max.

Copper................................................................................0.75max.

Aluminum............................................................................0.15-0.60

Titanium..............................................................................0.15-0.60

The mechanical propery of EN 1.4876 seamless pipes is as follows

Mechanical Properties
Typical room temperature Tensile Properties of Annealed Material

Product	Tensile (PSI)	.2% Yield (PSI)	Elongation (%)
	74530-99325	29870-59595	60-30

As per heat treatment of 1.4876 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of 1.4876 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce 1.4876 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of 1.4876 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of 1.4876 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our 1.4876 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our 1.4876 seamless pipe and weled pipes are widely used in many industry :Butterfly Valves,Globe Valves,compressed air stream,Agitated Neutsche Filter,Scrubber vessels.Accumulators,Shell and Tube Heat Exchangers,Storage tanks and Handling Equipments,Bulk Liquefied Petroleum Gas (LPG), Propane & Ammonia Storage and Handling Systems,Dry Dock & Ship Yard Maintenance and so on

Our 1.4876 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of 1.4876 pipes that you need, we are glad to quote the best price for your side

Except 1.4876 pipes,we also could produce 1.4876 flanges,1.4876 plates,1.4876 fastener,1.4876 bolts,1.4876 fittings,1.4876 bars,1.4876 tubes,1.4876 springs