Products

UNS S45500 Fittings
Home > Products > Pipe Fittings

We could produce UNS S45500 fittings,UNS S45500 Butt welding Pipe fittings,UNS S45500 butt weld fittings,S45500 butt welded fittings. UNS S45500 elbows,S45500 elbows,UNS S45500 reducer,S45500 reducers,S45500 tees,UNS S45500 tees,UNS S45500 Stub end,UNS S45500 crosses, UNS S45500 couplings, UNS S45500 nipples,UNS S45500 bend,S45500 weldolets,UNS S45500 caps,UNS S45500 outlet,UNS S45500 swage nipple,UNS S45500 sockolet from china

The type of UNS S45500 elbows that we could do is as follows:UNS S45500 90 degree Elbow,S45500 45 degree Elbow,UNS S45500 180 degree elbows,UNS S45500 socket elbows,UNS S45500 Butt welding/BW elbow, Socket welding/SW elbow, UNS S45500 Threaded elbow, UNS S45500 seamless elbow, UNS S45500 welded elbow.

The type of UNS S45500 reducer that we could do is as follows: S45500 Seamless reducer,S45500 Welded reducer,UNS S45500 Concentric reducer, UNS S45500 Eccentric reducer, UNS S45500 butt welding reducer,S45500 forged reducer,UNS S45500 forging reducer,UNS S45500 welding reducer;

The Wall thickness of UNS S45500 reducer that we could do range from Sch5~Sch160\XXS

The type of UNS S45500 tees that we could do is as follows:UNS S45500 Equal tee, S45500 reducing tee, UNS S45500 lateral tee, UNS S45500 BW/butt weld tee, UNS S45500 threaded tee, UNS S45500 SW/socket weld tee, UNS S45500 seamless tee

The type of UNS S45500 crosses that we could do is as follows:UNS S45500 Equal cross,UNS S45500 Straight cross,UNS S45500 Reducing cross,UNS S45500 Lateral cross,UNS S45500 Seamless cross,UNS S45500 Welded cross,UNS S45500 BW/butt welding cross, UNS S45500 threaded cross

The surface finish of UNS S45500 elbows,reducer,tees,stud end,crosses is  sandblasting,paint black lacquer or transparent oil on surface to prevent corrosion as per the requirement of the clients

We could produce UNS S45500 pipe fitting,UNS S45500 elbows,UNS S45500  reducer,S45500 tees,UNS S45500 stud end,UNS S45500 crosses as per the standard of ASME/ANSI B16.9, ANSI/ASME B16.11, ANSI/ASME B16.5;JIS B2201,JIS B2202,JIS B2203,JIS B2206;MSS SP-43, MSS SP-95, MSS SP-75, MSS SP-79; ISO 3419,ISO 5251,DIN 2616SY/T 0510, SH 3408, SH3410

Following is our capacity in produce UNS S45500 Pipe Fittings: Elbow machine up to 20inch,Reducing elbow moulds 2inch to 12inch,Elbow double beveling machine

,Tee machine 1500tons,Cross from 4inch to 10inch,Big shotblasting machine, Pneumatic marking machine

UNS S45500 is a precipitation hardening stainless steel. In the annealed condition the formability is good and by an aging heat treatment the material obtains extensive precipitation hardening.


The chemical composition of UNS S45500 pipe fitting,S45500 elbows,UNS S45500 reducer,UNS S45500 tees,UNS S45500 stud end,UNS S45500 crosses is as follows

Element

Min

Max

C

--

0.05

Mn

--

2.00

Si

--

0.50

P

--

0.040

S

--

0.030

Cr

11.00

12.50

Ni

7.50

9.50

Mo

--

0.50

Cu

1.50

2.50

Nb+Ta

0.10

0.50


The mechanical property of UNS S45500 pipe fitting,UNS S45500 elbows,UNS S45500 reducer,S45500 tees,UNS S45500 stud end,UNS S45500 crosses is as follows

Molybdenum

0.50

Mechanical Properties (Solution Treated)

Minimum Tensile Properties, Inch/Pound Units

Tensile

Yield Strength

Elongation

Nominal Wall Thickness

Strength

at 0.2% Offset

in 2 Inches or 4D

Inch

ksi

ksi

%

Up to 0.020, excl

220

205

0.020 to 0.062, incl

220

205

4

Over 0.062

220

205

3


our UNS S45500 pipe fittings,UNS S45500 Butt welding Pipe fittings are widely used in aircraft engine manufacturers, oil patch suppliers, petrochemical corporations and power-generation companies. Various military branches, aerospace engineers and nuclear markets and so on

We will do Visual inspection,Dimensional inspection,Hardness test,Ultrasonic test,Magnetic particle test,Material identification (marking) for every piece of UNS S45500 Pipe Fittings

We could supply UNS S45500 pipe fitting inspection certificate as per the standard of en10204-3.1 or En10204-3.2 by third party like(TUV,DNV,GL and so on)

Please send us the size or drawing of UNS S45500 pipe fittings,UNS S45500 Butt welding Pipe fittings,UNS S45500 elbows,UNS S45500 reducer,UNS S45500 tees,UNS S45500 Stub end,UNS S45500 crosses, UNS S45500 couplings, UNS S45500 nipples,UNS S45500 bend,UNS S45500 weldolets,UNS S45500 caps,UNS S45500 outlet,UNS S45500 swage nipple,UNS S45500 sockolet that you need, we are glad to qote the best price for your side

Except UNS S45500 pipe fittings,we also could produce UNS S45500 flanges,UNS S45500 plates,UNS S45500 fastener,UNS S45500 bolts,UNS S45500 bars,UNS S45500 pipes,UNS S45500 tubes,UNS S45500 springs