We could produce UNS S35045 fittings,UNS S35045 Butt welding Pipe fittings,UNS S35045 butt weld fittings,S35045 butt welded fittings. UNS S35045 elbows,S35045 elbows,UNS S35045 reducer,S35045 reducers,S35045 tees,UNS S35045 tees,UNS S35045 Stub end,UNS S35045 crosses, UNS S35045 couplings, UNS S35045 nipples,UNS S35045 bend,S35045 weldolets,UNS S35045 caps,UNS S35045 outlet,UNS S35045 swage nipple,UNS S35045 sockolet from china

The type of UNS S35045 elbows that we could do is as follows:UNS S35045 90 degree Elbow,S35045 45 degree Elbow,UNS S35045 180 degree elbows,UNS S35045 socket elbows,UNS S35045 Butt welding/BW elbow, Socket welding/SW elbow, UNS S35045 Threaded elbow, UNS S35045 seamless elbow, UNS S35045 welded elbow.

The type of UNS S35045 reducer that we could do is as follows: S35045 Seamless reducer,S35045 Welded reducer,UNS S35045 Concentric reducer, UNS S35045 Eccentric reducer, UNS S35045 butt welding reducer,S35045 forged reducer,UNS S35045 forging reducer,UNS S35045 welding reducer;

The Wall thickness of UNS S35045 reducer that we could do range from Sch5~Sch160\XXS

The type of UNS S35045 tees that we could do is as follows:UNS S35045 Equal tee, S35045 reducing tee, UNS S35045 lateral tee, UNS S35045 BW/butt weld tee, UNS S35045 threaded tee, UNS S35045 SW/socket weld tee, UNS S35045 seamless tee

The type of UNS S35045 crosses that we could do is as follows:UNS S35045 Equal cross,UNS S35045 Straight cross,UNS S35045 Reducing cross,UNS S35045 Lateral cross,UNS S35045 Seamless cross,UNS S35045 Welded cross,UNS S35045 BW/butt welding cross, UNS S35045 threaded cross

The surface finish of UNS S35045 elbows,reducer,tees,stud end,crosses is  sandblasting,paint black lacquer or transparent oil on surface to prevent corrosion as per the requirement of the clients

We could produce UNS S35045 pipe fitting,UNS S35045 elbows,UNS S35045  reducer,S35045 tees,UNS S35045 stud end,UNS S35045 crosses as per the standard of ASME/ANSI B16.9, ANSI/ASME B16.11, ANSI/ASME B16.5;JIS B2201,JIS B2202,JIS B2203,JIS B2206;MSS SP-43, MSS SP-95, MSS SP-75, MSS SP-79; ISO 3419,ISO 5251,DIN 2616SY/T 0510, SH 3408, SH3410

Following is our capacity in produce UNS S35045 Pipe Fittings: Elbow machine up to 20inch,Reducing elbow moulds 2inch to 12inch,Elbow double beveling machine

,Tee machine 1500tons,Cross from 4inch to 10inch,Big shotblasting machine, Pneumatic marking machine

UNS S35045 proves to be a cost effective alternative for replacing other alloys that are used in corrosive reducing, oxidizing and sulfidising environments.

The chemical composition of UNS S35045 pipe fitting,S35045 elbows,UNS S35045 reducer,UNS S35045 tees,UNS S35045 stud end,UNS S35045 crosses is as follows

Composition

·        Nickel:32.00-37.00%

·        Chromium:25.00-29.00%

·        Manganese:1.50-0.00% max

·        Silicon:1.00-0.00% max

·        Copper:0.75-0.00% max

·        Aluminium:0.15-0.60%

·        Titanium:0.15-0.60%

·        Carbon:0.06-0.10%

·        Sulphur:0.01-0.00% max

·        Iron:Balance

The mechanical property of UNS S35045 pipe fitting,UNS S35045 elbows,UNS S35045 reducer,S35045 tees,UNS S35045 stud end,UNS S35045 crosses is as follows

Properties	Metric
Tensile strength(sheet, cold rolled and solution  annealed)	552-621 MPa
Yield strength(rod, hot finished and solution annealed)	207-255 MPa
Elongation at Break( sheet, cold rolled and solution  annealed)	40-45%
Poissons Ratio	0.32

our UNS S35045 pipe fittings,UNS S35045 Butt welding Pipe fittings are widely used in Heat shields,Combustion and chimney liners,Valves,Piping,Distillation columns,Bubble caps,Reaction vessels Heat exchangers,Furnace,Gas turbine engine duct work,Equipment used to produce acid and so on

We will do Visual inspection,Dimensional inspection,Hardness test,Ultrasonic test,Magnetic particle test,Material identification (marking) for every piece of UNS S35045 Pipe Fittings

We could supply UNS S35045 pipe fitting inspection certificate as per the standard of en10204-3.1 or En10204-3.2 by third party like(TUV,DNV,GL and so on)

Please send us the size or drawing of UNS S35045 pipe fittings,UNS S35045 Butt welding Pipe fittings,UNS S35045 elbows,UNS S35045 reducer,UNS S35045 tees,UNS S35045 Stub end,UNS S35045 crosses, UNS S35045 couplings, UNS S35045 nipples,UNS S35045 bend,UNS S35045 weldolets,UNS S35045 caps,UNS S35045 outlet,UNS S35045 swage nipple,UNS S35045 sockolet that you need, we are glad to qote the best price for your side

Except UNS S35045 pipe fittings,we also could produce UNS S35045 flanges,UNS S35045 plates,UNS S35045 fastener,UNS S35045 bolts,UNS S35045 bars,UNS S35045 pipes,UNS S35045 tubes,UNS S35045 springs