Products

UNS S30908 Fittings
Home > Products > Pipe Fittings

We could produce UNS S30908 fittings,UNS S30908 Butt welding Pipe fittings,UNS S30908 butt weld fittings,S30908 butt welded fittings. UNS S30908 elbows,S30908 elbows,UNS S30908 reducer,S30908 reducers,S30908 tees,UNS S30908 tees,UNS S30908 Stub end,UNS S30908 crosses, UNS S30908 couplings, UNS S30908 nipples,UNS S30908 bend,S30908 weldolets,UNS S30908 caps,UNS S30908 outlet,UNS S30908 swage nipple,UNS S30908 sockolet from china

The type of UNS S30908 elbows that we could do is as follows:UNS S30908 90 degree Elbow,S30908 45 degree Elbow,UNS S30908 180 degree elbows,UNS S30908 socket elbows,UNS S30908 Butt welding/BW elbow, Socket welding/SW elbow, UNS S30908 Threaded elbow, UNS S30908 seamless elbow, UNS S30908 welded elbow.

The type of UNS S30908 reducer that we could do is as follows: S30908 Seamless reducer,S30908 Welded reducer,UNS S30908 Concentric reducer, UNS S30908 Eccentric reducer, UNS S30908 butt welding reducer,S30908 forged reducer,UNS S30908 forging reducer,UNS S30908 welding reducer;

The Wall thickness of UNS S30908 reducer that we could do range from Sch5~Sch160\XXS

The type of UNS S30908 tees that we could do is as follows:UNS S30908 Equal tee, S30908 reducing tee, UNS S30908 lateral tee, UNS S30908 BW/butt weld tee, UNS S30908 threaded tee, UNS S30908 SW/socket weld tee, UNS S30908 seamless tee

The type of UNS S30908 crosses that we could do is as follows:UNS S30908 Equal cross,UNS S30908 Straight cross,UNS S30908 Reducing cross,UNS S30908 Lateral cross,UNS S30908 Seamless cross,UNS S30908 Welded cross,UNS S30908 BW/butt welding cross, UNS S30908 threaded cross

The surface finish of UNS S30908 elbows,reducer,tees,stud end,crosses is  sandblasting,paint black lacquer or transparent oil on surface to prevent corrosion as per the requirement of the clients

We could produce UNS S30908 pipe fitting,UNS S30908 elbows,UNS S30908  reducer,S30908 tees,UNS S30908 stud end,UNS S30908 crosses as per the standard of ASME/ANSI B16.9, ANSI/ASME B16.11, ANSI/ASME B16.5;JIS B2201,JIS B2202,JIS B2203,JIS B2206;MSS SP-43, MSS SP-95, MSS SP-75, MSS SP-79; ISO 3419,ISO 5251,DIN 2616SY/T 0510, SH 3408, SH3410

Following is our capacity in produce UNS S30908 Pipe Fittings: Elbow machine up to 20inch,Reducing elbow moulds 2inch to 12inch,Elbow double beveling machine

,Tee machine 1500tons,Cross from 4inch to 10inch,Big shotblasting machine, Pneumatic marking machine

UNS S30908 is one of the most commonly used heat resisting alloys in the range of 1500-2000 degrees F under oxidizing conditions.


The chemical composition of UNS S30908 pipe fitting,S30908 elbows,UNS S30908 reducer,UNS S30908 tees,UNS S30908 stud end,UNS S30908 crosses is as follows

Element

Content (%)

Iron,  Fe

60

Chromium,  Cr

23

Nickel,  Ni

14

Manganese,  Mn

2

Silicon,  Si

1

Carbon,  C

0.080

Phosphorous,  P

0.045

Sulfur,  S

0.030


The mechanical property of UNS S30908 pipe fitting,UNS S30908 elbows,UNS S30908 reducer,S30908 tees,UNS S30908 stud end,UNS S30908 crosses is as follows

Properties

Metric

Tensile  strength, ultimate

90 KSI

Tensile  strength, yield (0.2%)

45 KSI

Elongation  at break (in 50 mm)

45%

Hardness,  Brinell (converted from Rockwell B hardness)

147

Hardness,  Knoop (converted from Rockwell B hardness)

164

Hardness,  Rockwell B

85

Hardness,  Vickers (converted from Rockwell B hardness)

169


our UNS S30908 pipe fittings,UNS S30908 Butt welding Pipe fittings are widely used in aircraft engine manufacturers, oil patch suppliers, petrochemical corporations and power-generation companies. Various military branches, aerospace engineers and nuclear markets and so on

We will do Visual inspection,Dimensional inspection,Hardness test,Ultrasonic test,Magnetic particle test,Material identification (marking) for every piece of UNS S30908 Pipe Fittings

We could supply UNS S30908 pipe fitting inspection certificate as per the standard of en10204-3.1 or En10204-3.2 by third party like(TUV,DNV,GL and so on)

Please send us the size or drawing of UNS S30908 pipe fittings,UNS S30908 Butt welding Pipe fittings,UNS S30908 elbows,UNS S30908 reducer,UNS S30908 tees,UNS S30908 Stub end,UNS S30908 crosses, UNS S30908 couplings, UNS S30908 nipples,UNS S30908 bend,UNS S30908 weldolets,UNS S30908 caps,UNS S30908 outlet,UNS S30908 swage nipple,UNS S30908 sockolet that you need, we are glad to qote the best price for your side

Except UNS S30908 pipe fittings,we also could produce UNS S30908 flanges,UNS S30908 plates,UNS S30908 fastener,UNS S30908 bolts,UNS S30908 bars,UNS S30908 pipes,UNS S30908 tubes,UNS S30908 springs