Products

UNS S15500 Fittings
Home > Products > Pipe Fittings

We could produce UNS S15500 fittings,UNS S15500 Butt welding Pipe fittings,UNS S15500 butt weld fittings,S15500 butt welded fittings. UNS S15500 elbows,S15500 elbows,UNS S15500 reducer,S15500 reducers,S15500 tees,UNS S15500 tees,UNS S15500 Stub end,UNS S15500 crosses, UNS S15500 couplings, UNS S15500 nipples,UNS S15500 bend,S15500 weldolets,UNS S15500 caps,UNS S15500 outlet,UNS S15500 swage nipple,UNS S15500 sockolet from china

The type of UNS S15500 elbows that we could do is as follows:UNS S15500 90 degree Elbow,S15500 45 degree Elbow,UNS S15500 180 degree elbows,UNS S15500 socket elbows,UNS S15500 Butt welding/BW elbow, Socket welding/SW elbow, UNS S15500 Threaded elbow, UNS S15500 seamless elbow, UNS S15500 welded elbow.

The type of UNS S15500 reducer that we could do is as follows: S15500 Seamless reducer,S15500 Welded reducer,UNS S15500 Concentric reducer, UNS S15500 Eccentric reducer, UNS S15500 butt welding reducer,S15500 forged reducer,UNS S15500 forging reducer,UNS S15500 welding reducer;

The Wall thickness of UNS S15500 reducer that we could do range from Sch5~Sch160\XXS

The type of UNS S15500 tees that we could do is as follows:UNS S15500 Equal tee, S15500 reducing tee, UNS S15500 lateral tee, UNS S15500 BW/butt weld tee, UNS S15500 threaded tee, UNS S15500 SW/socket weld tee, UNS S15500 seamless tee

The type of UNS S15500 crosses that we could do is as follows:UNS S15500 Equal cross,UNS S15500 Straight cross,UNS S15500 Reducing cross,UNS S15500 Lateral cross,UNS S15500 Seamless cross,UNS S15500 Welded cross,UNS S15500 BW/butt welding cross, UNS S15500 threaded cross

The surface finish of UNS S15500 elbows,reducer,tees,stud end,crosses is  sandblasting,paint black lacquer or transparent oil on surface to prevent corrosion as per the requirement of the clients

We could produce UNS S15500 pipe fitting,UNS S15500 elbows,UNS S15500  reducer,S15500 tees,UNS S15500 stud end,UNS S15500 crosses as per the standard of ASME/ANSI B16.9, ANSI/ASME B16.11, ANSI/ASME B16.5;JIS B2201,JIS B2202,JIS B2203,JIS B2206;MSS SP-43, MSS SP-95, MSS SP-75, MSS SP-79; ISO 3419,ISO 5251,DIN 2616SY/T 0510, SH 3408, SH3410

Following is our capacity in produce UNS S15500 Pipe Fittings: Elbow machine up to 20inch,Reducing elbow moulds 2inch to 12inch,Elbow double beveling machine

,Tee machine 1500tons,Cross from 4inch to 10inch,Big shotblasting machine, Pneumatic marking machine

UNS S15500 is a martensitic, precipitation hardening, chromium-nickel-copper stainless steel.


The chemical composition of UNS S15500 pipe fitting,S15500 elbows,UNS S15500 reducer,UNS S15500 tees,UNS S15500 stud end,UNS S15500 crosses is as follows

C

0.07 max

Cr

14 - 15.5

Cu

2.5 - 4.5

Fe

Balance

Mn

1 max

Ni

3.5 - 5.5

Nb

0.15 - 0.45

P

0.04 max

Si

1 max

S

0.03 max


The mechanical property of UNS S15500 pipe fitting,UNS S15500 elbows,UNS S15500 reducer,S15500 tees,UNS S15500 stud end,UNS S15500 crosses is as follows

Material Type

Condition

Ultimate Tensile Strength (PSI)

0.2% Yield Strength (PSI)

Elongation (% In 2in.)

Reduction Of Area (%)

Hardness Brinell

Hardness Rockwell

UNS S15500

H900

190,000

170,000

6

15

388

C40

H1025

155,000

145,000

8

27

331

C35

H1075

145,000

125,000

9

28

311

C32

H1150

135,000

105,000

11

30

277

C28

H1150-M

115,000

75,000

14

35

255

C24


our UNS S15500 pipe fittings,UNS S15500 Butt welding Pipe fittings are widely used in Condensers, Rotary Vacuum Dryers,Flavor Processing ,Equipment,Slurry Tanks.Surge Tanks,Boilers & Boiler ancillary equipments.Heat Exchanger & Coils,Continuous Steam Sterilizer.Conveyor Dryer,Gass liquied Fermenters.Static Mixer.Twin Sharft Dispersers,crystalizer equipment,Wellhead and Christmas tree. power transmission, turbine,gas compressor,gear boxes and so on

We will do Visual inspection,Dimensional inspection,Hardness test,Ultrasonic test,Magnetic particle test,Material identification (marking) for every piece of UNS S15500 Pipe Fittings

We could supply UNS S15500 pipe fitting inspection certificate as per the standard of en10204-3.1 or En10204-3.2 by third party like(TUV,DNV,GL and so on)

Please send us the size or drawing of UNS S15500 pipe fittings,UNS S15500 Butt welding Pipe fittings,UNS S15500 elbows,UNS S15500 reducer,UNS S15500 tees,UNS S15500 Stub end,UNS S15500 crosses, UNS S15500 couplings, UNS S15500 nipples,UNS S15500 bend,UNS S15500 weldolets,UNS S15500 caps,UNS S15500 outlet,UNS S15500 swage nipple,UNS S15500 sockolet that you need, we are glad to qote the best price for your side

Except UNS S15500 pipe fittings,we also could produce UNS S15500 flanges,UNS S15500 plates,UNS S15500 fastener,UNS S15500 bolts,UNS S15500 bars,UNS S15500 pipes,UNS S15500 tubes,UNS S15500 springs