Products

UNS N06950 Fittings
Home > Products > Pipe Fittings

We could produce UNS N06950 fittings,UNS N06950 Butt welding Pipe fittings,UNS N06950 butt weld fittings,UNS NO6950 butt welded fittings. UNS N06950 elbows,UNS NO6950 elbows,UNS N06950 reducer,UNS NO6950 reducers,UNS NO6950 tees,UNS N06950 tees,UNS N06950 Stub end,UNS N06950 crosses, UNS N06950 couplings, UNS N06950 nipples,UNS N06950 bend,UNS NO6950 weldolets,UNS N06950 caps,UNS N06950 outlet,UNS N06950 swage nipple,UNS N06950 sockolet from china

The type of UNS N06950 elbows that we could do is as follows:UNS N06950 90 degree Elbow,UNS NO6950 45 degree Elbow,UNS N06950 180 degree elbows,UNS N06950 socket elbows,UNS N06950 Butt welding/BW elbow, Socket welding/SW elbow, UNS N06950 Threaded elbow, UNS N06950 seamless elbow, UNS N06950 welded elbow.

The type of UNS N06950 reducer that we could do is as follows: UNS NO6950 Seamless reducer,UNS NO6950 Welded reducer,UNS N06950 Concentric reducer, UNS N06950 Eccentric reducer, UNS N06950 butt welding reducer,UNS NO6950 forged reducer,UNS N06950 forging reducer,UNS N06950 welding reducer;

The Wall thickness of UNS N06950 reducer that we could do range from Sch5~Sch160\XXS

The type of UNS N06950 tees that we could do is as follows:UNS N06950 Equal tee, UNS NO6950 reducing tee, UNS N06950 lateral tee, UNS N06950 BW/butt weld tee, UNS N06950 threaded tee, UNS N06950 SW/socket weld tee, UNS N06950 seamless tee

The type of UNS N06950 crosses that we could do is as follows:UNS N06950 Equal cross,UNS N06950 Straight cross,UNS N06950 Reducing cross,UNS N06950 Lateral cross,UNS N06950 Seamless cross,UNS N06950 Welded cross,UNS N06950 BW/butt welding cross, UNS N06950 threaded cross

The surface finish of UNS N06950 elbows,reducer,tees,stud end,crosses is  sandblasting,paint black lacquer or transparent oil on surface to prevent corrosion as per the requirement of the clients

We could produce UNS N06950 pipe fitting,UNS N06950 elbows,UNS N06950  reducer,UNS NO6950 tees,UNS N06950 stud end,UNS N06950 crosses as per the standard of ASME/ANSI B16.9, ANSI/ASME B16.11, ANSI/ASME B16.5;JIS B2201,JIS B2202,JIS B2203,JIS B2206;MSS SP-43, MSS SP-95, MSS SP-75, MSS SP-79; ISO 3419,ISO 5251,DIN 2616SY/T 0510, SH 3408, SH3410

Following is our capacity in produce UNS N06950 Pipe Fittings: Elbow machine up to 20inch,Reducing elbow moulds 2inch to 12inch,Elbow double beveling machine

,Tee machine 1500tons,Cross from 4inch to 10inch,Big shotblasting machine, Pneumatic marking machine

UNS N06950 have the capacity to function at high temperatures and extreme mechanical stress, and also where high surface stability is required.  


The chemical composition of UNS N06950 pipe fitting,UNS NO6950 elbows,UNS N06950 reducer,UNS N06950 tees,UNS N06950 stud end,UNS N06950 crosses is as follows

Al

0.4 max

C

0.02 max

Cr

19 - 21

Co

2.5 min

Cu

0.5 max

Fe

15 - 20

Mn

1 max

Mo

8 - 10

Ni

Balance

Nb

0.5 max

P

0.04 max

Si

1 max

S

0.015 max

W

1 max


The mechanical property of UNS N06950 pipe fitting,UNS N06950 elbows,UNS N06950 reducer,UNS NO6950 tees,UNS N06950 stud end,UNS N06950 crosses is as follows

Properties

Metric

Imperial

Tensile strength

≥ 760 MPa

≥ 110000 psi

Yield strength (@ strain 0.200%)

700-860 MPa

102000-125000 psi

Elongation at break (in 50 mm)

≥ 20%

≥ 20%

Hardness, Brinell (estimated from Rockwell C for  Brinell 10 mm ball/3000 kg load)

290

290

Hardness, Knoop (estimated from Rockwell C)

345

345

Hardness, Rockwell A (estimated from Rockwell C)

66

66

Hardness, Rockwell C

≤ 31

≤ 31

Hardness, Vickers (estimated from Rockwell C)

300

300


our UNS N06950 pipe fittings,UNS N06950 Butt welding Pipe fittings are widely used in Heat shields,Combustion and chimney liners,Valves,Piping,Distillation columns,Bubble caps,Reaction vessels Heat exchangers,Furnace,Gas turbine engine duct work,Equipment used to produce acid and so on

We will do Visual inspection,Dimensional inspection,Hardness test,Ultrasonic test,Magnetic particle test,Material identification (marking) for every piece of UNS N06950 Pipe Fittings

We could supply UNS N06950 pipe fitting inspection certificate as per the standard of en10204-3.1 or En10204-3.2 by third party like(TUV,DNV,GL and so on)

Please send us the size or drawing of UNS N06950 pipe fittings,UNS N06950 Butt welding Pipe fittings,UNS N06950 elbows,UNS N06950 reducer,UNS N06950 tees,UNS N06950 Stub end,UNS N06950 crosses, UNS N06950 couplings, UNS N06950 nipples,UNS N06950 bend,UNS N06950 weldolets,UNS N06950 caps,UNS N06950 outlet,UNS N06950 swage nipple,UNS N06950 sockolet that you need, we are glad to qote the best price for your side

Except UNS N06950 pipe fittings,we also could produce UNS N06950 flanges,UNS N06950 plates,UNS N06950 fastener,UNS N06950 bolts,UNS N06950 bars,UNS N06950 pipes,UNS N06950 tubes,UNS N06950 springs