Products

UNS N06686 Fittings
Home > Products > Pipe Fittings

We could produce UNS N06686 fittings,UNS N06686 Butt welding Pipe fittings,UNS N06686 butt weld fittings,UNS NO6686 butt welded fittings. UNS N06686 elbows,UNS NO6686 elbows,UNS N06686 reducer,UNS NO6686 reducers,UNS NO6686 tees,UNS N06686 tees,UNS N06686 Stub end,UNS N06686 crosses, UNS N06686 couplings, UNS N06686 nipples,UNS N06686 bend,UNS NO6686 weldolets,UNS N06686 caps,UNS N06686 outlet,UNS N06686 swage nipple,UNS N06686 sockolet from china

The type of UNS N06686 elbows that we could do is as follows:UNS N06686 90 degree Elbow,UNS NO6686 45 degree Elbow,UNS N06686 180 degree elbows,UNS N06686 socket elbows,UNS N06686 Butt welding/BW elbow, Socket welding/SW elbow, UNS N06686 Threaded elbow, UNS N06686 seamless elbow, UNS N06686 welded elbow.

The type of UNS N06686 reducer that we could do is as follows: UNS NO6686 Seamless reducer,UNS NO6686 Welded reducer,UNS N06686 Concentric reducer, UNS N06686 Eccentric reducer, UNS N06686 butt welding reducer,UNS NO6686 forged reducer,UNS N06686 forging reducer,UNS N06686 welding reducer;

The Wall thickness of UNS N06686 reducer that we could do range from Sch5~Sch160\XXS

The type of UNS N06686 tees that we could do is as follows:UNS N06686 Equal tee, UNS NO6686 reducing tee, UNS N06686 lateral tee, UNS N06686 BW/butt weld tee, UNS N06686 threaded tee, UNS N06686 SW/socket weld tee, UNS N06686 seamless tee

The type of UNS N06686 crosses that we could do is as follows:UNS N06686 Equal cross,UNS N06686 Straight cross,UNS N06686 Reducing cross,UNS N06686 Lateral cross,UNS N06686 Seamless cross,UNS N06686 Welded cross,UNS N06686 BW/butt welding cross, UNS N06686 threaded cross

The surface finish of UNS N06686 elbows,reducer,tees,stud end,crosses is  sandblasting,paint black lacquer or transparent oil on surface to prevent corrosion as per the requirement of the clients

We could produce UNS N06686 pipe fitting,UNS N06686 elbows,UNS N06686  reducer,UNS NO6686 tees,UNS N06686 stud end,UNS N06686 crosses as per the standard of ASME/ANSI B16.9, ANSI/ASME B16.11, ANSI/ASME B16.5;JIS B2201,JIS B2202,JIS B2203,JIS B2206;MSS SP-43, MSS SP-95, MSS SP-75, MSS SP-79; ISO 3419,ISO 5251,DIN 2616SY/T 0510, SH 3408, SH3410

Following is our capacity in produce UNS N06686 Pipe Fittings: Elbow machine up to 20inch,Reducing elbow moulds 2inch to 12inch,Elbow double beveling machine

,Tee machine 1500tons,Cross from 4inch to 10inch,Big shotblasting machine, Pneumatic marking machine

UNS N06686 is a single phase Ni-Cr-Mo-W alloy that is primarily used in extremely corrosive applications, e.g. flue gas desulfurization systems and processing plants in which mixed acids are used. This alloy is also used in fields where localized pitting is difficult.


The chemical composition of UNS N06686 pipe fitting,UNS NO6686 elbows,UNS N06686 reducer,UNS N06686 tees,UNS N06686 stud end,UNS N06686 crosses is as follows

Limiting Chemical Composition, wt %

Mn 0.75 max.

S 0.02 max.

Si 0.08 max.

P 0.04 max.

Ni Balance

Cr 19.0 - 23.0

Mo 15.0 - 17.0

W 3.0 - 4.4

Ti 0.02 - 0.25

Fe 1.0 max.

C 0.01 max.


The mechanical property of UNS N06686 pipe fitting,UNS N06686 elbows,UNS N06686 reducer,UNS NO6686 tees,UNS N06686 stud end,UNS N06686 crosses is as follows

The mechanicalproperties of Inconel 686™ are provided below.

Properties

Metric

Imperial

Tensile strength

721.9 MPa

104700 psi

Yield strength (@strain 0.200%)

364 MPa

52800 psi

Elongation at break

71%

71%


our UNS N06686 pipe fittings,UNS N06686 Butt welding Pipe fittings are widely used in chemical processing, pollution control, pulp and paper production, and treatment of industrial and municipal waste,gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling and so on

We will do Visual inspection,Dimensional inspection,Hardness test,Ultrasonic test,Magnetic particle test,Material identification (marking) for every piece of UNS N06686 Pipe Fittings

We could supply UNS N06686 pipe fitting inspection certificate as per the standard of en10204-3.1 or En10204-3.2 by third party like(TUV,DNV,GL and so on)

Please send us the size or drawing of UNS N06686 pipe fittings,UNS N06686 Butt welding Pipe fittings,UNS N06686 elbows,UNS N06686 reducer,UNS N06686 tees,UNS N06686 Stub end,UNS N06686 crosses, UNS N06686 couplings, UNS N06686 nipples,UNS N06686 bend,UNS N06686 weldolets,UNS N06686 caps,UNS N06686 outlet,UNS N06686 swage nipple,UNS N06686 sockolet that you need, we are glad to qote the best price for your side

Except UNS N06686 pipe fittings,we also could produce UNS N06686 flanges,UNS N06686 plates,UNS N06686 fastener,UNS N06686 bolts,UNS N06686 bars,UNS N06686 pipes,UNS N06686 tubes,UNS N06686 springs