Products

UNS N06617 Fittings
Home > Products > Pipe Fittings

We could produce UNS N06617 fittings,UNS N06617 Butt welding Pipe fittings,UNS N06617 butt weld fittings,UNS NO6617 butt welded fittings. UNS N06617 elbows,UNS NO6617 elbows,UNS N06617 reducer,UNS NO6617 reducers,UNS NO6617 tees,UNS N06617 tees,UNS N06617 Stub end,UNS N06617 crosses, UNS N06617 couplings, UNS N06617 nipples,UNS N06617 bend,UNS NO6617 weldolets,UNS N06617 caps,UNS N06617 outlet,UNS N06617 swage nipple,UNS N06617 sockolet from china

The type of UNS N06617 elbows that we could do is as follows:UNS N06617 90 degree Elbow,UNS NO6617 45 degree Elbow,UNS N06617 180 degree elbows,UNS N06617 socket elbows,UNS N06617 Butt welding/BW elbow, Socket welding/SW elbow, UNS N06617 Threaded elbow, UNS N06617 seamless elbow, UNS N06617 welded elbow.

The type of UNS N06617 reducer that we could do is as follows: UNS NO6617 Seamless reducer,UNS NO6617 Welded reducer,UNS N06617 Concentric reducer, UNS N06617 Eccentric reducer, UNS N06617 butt welding reducer,UNS NO6617 forged reducer,UNS N06617 forging reducer,UNS N06617 welding reducer;

The Wall thickness of UNS N06617 reducer that we could do range from Sch5~Sch160\XXS

The type of UNS N06617 tees that we could do is as follows:UNS N06617 Equal tee, UNS NO6617 reducing tee, UNS N06617 lateral tee, UNS N06617 BW/butt weld tee, UNS N06617 threaded tee, UNS N06617 SW/socket weld tee, UNS N06617 seamless tee

The type of UNS N06617 crosses that we could do is as follows:UNS N06617 Equal cross,UNS N06617 Straight cross,UNS N06617 Reducing cross,UNS N06617 Lateral cross,UNS N06617 Seamless cross,UNS N06617 Welded cross,UNS N06617 BW/butt welding cross, UNS N06617 threaded cross

The surface finish of UNS N06617 elbows,reducer,tees,stud end,crosses is  sandblasting,paint black lacquer or transparent oil on surface to prevent corrosion as per the requirement of the clients

We could produce UNS N06617 pipe fitting,UNS N06617 elbows,UNS N06617  reducer,UNS NO6617 tees,UNS N06617 stud end,UNS N06617 crosses as per the standard of ASME/ANSI B16.9, ANSI/ASME B16.11, ANSI/ASME B16.5;JIS B2201,JIS B2202,JIS B2203,JIS B2206;MSS SP-43, MSS SP-95, MSS SP-75, MSS SP-79; ISO 3419,ISO 5251,DIN 2616SY/T 0510, SH 3408, SH3410

Following is our capacity in produce UNS N06617 Pipe Fittings: Elbow machine up to 20inch,Reducing elbow moulds 2inch to 12inch,Elbow double beveling machine

,Tee machine 1500tons,Cross from 4inch to 10inch,Big shotblasting machine, Pneumatic marking machine

UNS N06617  is a nickel chromium cobalt molybdenum alloy, with an addition of Aluminium, which is designed to have a combination of increased strength and stability at elevated temperature, whilst retaining the high temperature corrosion resistance of INCONEL: alloy 601


The chemical composition of UNS N06617 pipe fitting,UNS NO6617 elbows,UNS N06617 reducer,UNS N06617 tees,UNS N06617 stud end,UNS N06617 crosses is as follows

ASTM  B166/564

Ni,  min.

44,5

Cr

20,0  - 24,0

Co

10,0  -15,0

Mo

8,0  -10,0

Fe,  max.

3,0

Mn,  max.

1,0

Al

0,8  - 1,5

C

0,05  - 0,15

Cu,  max.

0,5

Si,  max.

1,0

S,  max.

0,015

Ti,  max.

0,6

B,  max.

0,006


The mechanical property of UNS N06617 pipe fitting,UNS N06617 elbows,UNS N06617 reducer,UNS NO6617 tees,UNS N06617 stud end,UNS N06617 crosses is as follows

Material

Form  Condition

Yield Strength

Tensile Strength

Elongation %

Reduction  of Area

Hardness, BHN

ksi

MPa

ksi

MPa

UNS  N06617

Solution Annealed

50.9

351

109.5

755

58

-

173


our UNS N06617 pipe fittings,UNS N06617 Butt welding Pipe fittings are widely used in Heat shields,Combustion and chimney liners,Valves,Piping,Distillation columns,Bubble caps,Reaction vessels Heat exchangers,Furnace,Gas turbine engine duct work,Equipment used to produce acid and so on

We will do Visual inspection,Dimensional inspection,Hardness test,Ultrasonic test,Magnetic particle test,Material identification (marking) for every piece of UNS N06617 Pipe Fittings

We could supply UNS N06617 pipe fitting inspection certificate as per the standard of en10204-3.1 or En10204-3.2 by third party like(TUV,DNV,GL and so on)

Please send us the size or drawing of UNS N06617 pipe fittings,UNS N06617 Butt welding Pipe fittings,UNS N06617 elbows,UNS N06617 reducer,UNS N06617 tees,UNS N06617 Stub end,UNS N06617 crosses, UNS N06617 couplings, UNS N06617 nipples,UNS N06617 bend,UNS N06617 weldolets,UNS N06617 caps,UNS N06617 outlet,UNS N06617 swage nipple,UNS N06617 sockolet that you need, we are glad to qote the best price for your side

Except UNS N06617 pipe fittings,we also could produce UNS N06617 flanges,UNS N06617 plates,UNS N06617 fastener,UNS N06617 bolts,UNS N06617 bars,UNS N06617 pipes,UNS N06617 tubes,UNS N06617 springs