We could produce UNS N06600 pipe fittings,UNS N06600 Butt welding Pipe fittings,UNS N06600 butt weld fittings,UNS NO6600 butt welded fittings. UNS N06600 elbows,UNS NO6600 elbows,UNS N06600 reducer,UNS NO6600 reducers,UNS NO6600 tees,UNS N06600 tees,UNS N06600 Stub end,UNS N06600 crosses, UNS N06600 couplings, UNS N06600 nipples,UNS N06600 bend,UNS NO6600 weldolets,UNS N06600 caps,UNS N06600 outlet,UNS N06600 swage nipple,UNS N06600 sockolet from china
The type of UNS N06600 elbows that we could do is as follows:UNS N06600 90 degree Elbow,UNS NO6600 45 degree Elbow,UNS N06600 180 degree elbows,UNS N06600 socket elbows,UNS N06600 Butt welding/BW elbow, Socket welding/SW elbow, UNS N06600 Threaded elbow, UNS N06600 seamless elbow, UNS N06600 welded elbow.
The type of UNS N06600 reducer that we could do is as follows: UNS NO6600 Seamless reducer,UNS NO6600 Welded reducer,UNS N06600 Concentric reducer, UNS N06600 Eccentric reducer, UNS N06600 butt welding reducer,UNS NO6600 forged reducer,UNS N06600 forging reducer,UNS N06600 welding reducer;
The Wall thickness of UNS N06600 reducer that we could do range from Sch5~Sch160\XXS
The type of UNS N06600 tees that we could do is as follows:UNS N06600 Equal tee, UNS NO6600 reducing tee, UNS N06600 lateral tee, UNS N06600 BW/butt weld tee, UNS N06600 threaded tee, UNS N06600 SW/socket weld tee, UNS N06600 seamless tee
The type of UNS N06600 crosses that we could do is as follows:UNS N06600 Equal cross,UNS N06600 Straight cross,UNS N06600 Reducing cross,UNS N06600 Lateral cross,UNS N06600 Seamless cross,UNS N06600 Welded cross,UNS N06600 BW/butt welding cross, UNS N06600 threaded cross
The surface finish of UNS N06600 elbows,reducer,tees,stud end,crosses is sandblasting,paint black lacquer or transparent oil on surface to prevent corrosion as per the requirement of the clients
We could produce UNS N06600 pipe fitting,UNS N06600 elbows,UNS N06600 reducer,UNS NO6600 tees,UNS N06600 stud end,UNS N06600 crosses as per the standard of ASME/ANSI B16.9, ANSI/ASME B16.11, ANSI/ASME B16.5;JIS B2201,JIS B2202,JIS B2203,JIS B2206;MSS SP-43, MSS SP-95, MSS SP-75, MSS SP-79; ISO 3419,ISO 5251,DIN 2616SY/T 0510, SH 3408, SH3410
Following is our capacity in produce UNS N06600 Pipe Fittings: Elbow machine up to 20inch,Reducing elbow moulds 2inch to 12inch,Elbow double beveling machine
,Tee machine 1500tons,Cross from 4inch to 10inch,Big shotblasting machine, Pneumatic marking machine
UNS N06600 is A nickel-chromium alloy with good oxidation resistance at higher temperatures
Inconel 600 is a nickel-chromium alloy used for applications that require corrosion and high temperature resistance.
The chemical composition of UNS N06600 pipe fitting,UNS NO6600 elbows,UNS N06600 reducer,UNS N06600 tees,UNS N06600 stud end,UNS N06600 crosses is as follows
Ni (plusCo)....................................................72.0 min.
Cr..................................................................14.0-17.0
Fe..........................................................................6.00-10.00
C......................................................................0.15 max.
Mn................................................................1.00max
S.......................................................................0.015max.
Si.......................................................................0.50max.
Cu......................................................................0.50max
The mechanical property of UNS N06600 pipe fitting,UNS N06600 elbows,UNS N06600 reducer,UNS NO6600 tees,UNS N06600 stud end,UNS N06600 crosses is as follows
Mechanical Properties
Typical room temperature Tensile Properties of Annealed Material
Product Form | Condition | Tensile (PSI) | .2% Yield (MPA) | Elongation (%) | Hardness (HRB) |
UNS N06600 | Solution treatment | 74530-99325 | 24940-49735 | 35*55 | - |
our UNS N06600 pipe fittings,UNS N06600 Butt welding Pipe fittings are widely used in Ship building,Refineries,Defence.Oil & gas.Mining,Petrochemical,Chemical,Power plant,Railway,Sugar,Steel plant,Fertilizers,Ports,Paper,Cement and so on
We will do Visual inspection,Dimensional inspection,Hardness test,Ultrasonic test,Magnetic particle test,Material identification (marking) for every piece of UNS N06600 Pipe Fittings
We could supply UNS N06600 pipe fitting inspection certificate as per the standard of en10204-3.1 or En10204-3.2 by third party like(TUV,DNV,GL and so on)
Please send us the size or drawing of UNS N06600 pipe fittings,UNS N06600 Butt welding Pipe fittings,UNS N06600 elbows,UNS N06600 reducer,UNS N06600 tees,UNS N06600 Stub end,UNS N06600 crosses, UNS N06600 couplings, UNS N06600 nipples,UNS N06600 bend,UNS N06600 weldolets,UNS N06600 caps,UNS N06600 outlet,UNS N06600 swage nipple,UNS N06600 sockolet that you need, we are glad to qote the best price for your side
Except UNS N06600 pipe fittings,we also could produce UNS N06600 flanges,UNS N06600 plates,UNS N06600 fastener,UNS N06600 bolts,UNS N06600 bars,UNS N06600 pipes,UNS N06600 tubes,UNS N06600 springs
-
New
·1.4886 Fittings ·1.4529 fittings ·1.4876 Fittings ·2.4856 Fittings ·2.4851 Fittings ·2.4816 Fittings ·2.4668 Fittings ·2.4663 Fittings ·2.4642 Fittings ·2.4606 Fittings -
Any
-
Hot