Products

UNS N06075 Fittings
Home > Products > Pipe Fittings

We could produce UNS N06075 fittings,UNS N06075 Butt welding Pipe fittings,UNS N06075 butt weld fittings,UNS NO6075 butt welded fittings. UNS N06075 elbows,UNS NO6075 elbows,UNS N06075 reducer,UNS NO6075 reducers,UNS NO6075 tees,UNS N06075 tees,UNS N06075 Stub end,UNS N06075 crosses, UNS N06075 couplings, UNS N06075 nipples,UNS N06075 bend,UNS NO6075 weldolets,UNS N06075 caps,UNS N06075 outlet,UNS N06075 swage nipple,UNS N06075 sockolet from china

The type of UNS N06075 elbows that we could do is as follows:UNS N06075 90 degree Elbow,UNS NO6075 45 degree Elbow,UNS N06075 180 degree elbows,UNS N06075 socket elbows,UNS N06075 Butt welding/BW elbow, Socket welding/SW elbow, UNS N06075 Threaded elbow, UNS N06075 seamless elbow, UNS N06075 welded elbow.

The type of UNS N06075 reducer that we could do is as follows: UNS NO6075 Seamless reducer,UNS NO6075 Welded reducer,UNS N06075 Concentric reducer, UNS N06075 Eccentric reducer, UNS N06075 butt welding reducer,UNS NO6075 forged reducer,UNS N06075 forging reducer,UNS N06075 welding reducer;

The Wall thickness of UNS N06075 reducer that we could do range from Sch5~Sch160\XXS

The type of UNS N06075 tees that we could do is as follows:UNS N06075 Equal tee, UNS NO6075 reducing tee, UNS N06075 lateral tee, UNS N06075 BW/butt weld tee, UNS N06075 threaded tee, UNS N06075 SW/socket weld tee, UNS N06075 seamless tee

The type of UNS N06075 crosses that we could do is as follows:UNS N06075 Equal cross,UNS N06075 Straight cross,UNS N06075 Reducing cross,UNS N06075 Lateral cross,UNS N06075 Seamless cross,UNS N06075 Welded cross,UNS N06075 BW/butt welding cross, UNS N06075 threaded cross

The surface finish of UNS N06075 elbows,reducer,tees,stud end,crosses is  sandblasting,paint black lacquer or transparent oil on surface to prevent corrosion as per the requirement of the clients

We could produce UNS N06075 pipe fitting,UNS N06075 elbows,UNS N06075  reducer,UNS NO6075 tees,UNS N06075 stud end,UNS N06075 crosses as per the standard of ASME/ANSI B16.9, ANSI/ASME B16.11, ANSI/ASME B16.5;JIS B2201,JIS B2202,JIS B2203,JIS B2206;MSS SP-43, MSS SP-95, MSS SP-75, MSS SP-79; ISO 3419,ISO 5251,DIN 2616SY/T 0510, SH 3408, SH3410

Following is our capacity in produce UNS N06075 Pipe Fittings: Elbow machine up to 20inch,Reducing elbow moulds 2inch to 12inch,Elbow double beveling machine

,Tee machine 1500tons,Cross from 4inch to 10inch,Big shotblasting machine, Pneumatic marking machine

UNS N06075 is a nickel-chromium alloy with good mechanical properties and oxidation resistance at high temperatures.


The chemical composition of UNS N06075 pipe fitting,UNS NO6075 elbows,UNS N06075 reducer,UNS N06075 tees,UNS N06075 stud end,UNS N06075 crosses is as follows

·        Chromium(Cr):18.00-21.00%

·        Iron(Fe):5.00-0.00% max

·        Manganese(Mn):1.00-0.00%

·        Silicon(Si):1.00-0.00%

·        Copper(Cu):0.50-0.00% max

·        Titanium(Ti):0.20-0.60%

·        Carbon(C):0.08-0.15%

·        Nickel(Ni):Balance


The mechanical property of UNS N06075 pipe fitting,UNS N06075 elbows,UNS N06075 reducer,UNS NO6075 tees,UNS N06075 stud end,UNS N06075 crosses is as follows

Key properties (in annealedcondition)

·        Tensile strength: 114.00–0.00 Ksi

·        Yield strength: 50.00–0.00 Ksi

·        Elongation: 40.00–0.00%


our UNS N06075 pipe fittings,UNS N06075 Butt welding Pipe fittings are widely used in Feed-water and steam generator tubing in power plants,Brine heaters and evaporator bodies in salt plants,Sulphuric and hydrouoric acid alkylation plants,Industrial heat exchangers,Cladding for crude oil distillation columns,Splash-zone sheathing in offshore structures, seawater service,Plants for isotope separation in the production of nuclear fuel pumps and valves used in the manufacture of chlorinated hydrocarbons and so on

We will do Visual inspection,Dimensional inspection,Hardness test,Ultrasonic test,Magnetic particle test,Material identification (marking) for every piece of UNS N06075 Pipe Fittings

We could supply UNS N06075 pipe fitting inspection certificate as per the standard of en10204-3.1 or En10204-3.2 by third party like(TUV,DNV,GL and so on)

Please send us the size or drawing of UNS N06075 pipe fittings,UNS N06075 Butt welding Pipe fittings,UNS N06075 elbows,UNS N06075 reducer,UNS N06075 tees,UNS N06075 Stub end,UNS N06075 crosses, UNS N06075 couplings, UNS N06075 nipples,UNS N06075 bend,UNS N06075 weldolets,UNS N06075 caps,UNS N06075 outlet,UNS N06075 swage nipple,UNS N06075 sockolet that you need, we are glad to qote the best price for your side

Except UNS N06075 pipe fittings,we also could produce UNS N06075 flanges,UNS N06075 plates,UNS N06075 fastener,UNS N06075 bolts,UNS N06075 bars,UNS N06075 pipes,UNS N06075 tubes,UNS N06075 springs