Products

UNS N06035 Fittings
Home > Products > Pipe Fittings

We could produce UNS N06035 fittings,UNS N06035 Butt welding Pipe fittings,UNS N06035 butt weld fittings,UNS NO6035 butt welded fittings. UNS N06035 elbows,UNS NO6035 elbows,UNS N06035 reducer,UNS NO6035 reducers,UNS NO6035 tees,UNS N06035 tees,UNS N06035 Stub end,UNS N06035 crosses, UNS N06035 couplings, UNS N06035 nipples,UNS N06035 bend,UNS NO6035 weldolets,UNS N06035 caps,UNS N06035 outlet,UNS N06035 swage nipple,UNS N06035 sockolet from china

The type of UNS N06035 elbows that we could do is as follows:UNS N06035 90 degree Elbow,UNS NO6035 45 degree Elbow,UNS N06035 180 degree elbows,UNS N06035 socket elbows,UNS N06035 Butt welding/BW elbow, Socket welding/SW elbow, UNS N06035 Threaded elbow, UNS N06035 seamless elbow, UNS N06035 welded elbow.

The type of UNS N06035 reducer that we could do is as follows: UNS NO6035 Seamless reducer,UNS NO6035 Welded reducer,UNS N06035 Concentric reducer, UNS N06035 Eccentric reducer, UNS N06035 butt welding reducer,UNS NO6035 forged reducer,UNS N06035 forging reducer,UNS N06035 welding reducer;

The Wall thickness of UNS N06035 reducer that we could do range from Sch5~Sch160\XXS

The type of UNS N06035 tees that we could do is as follows:UNS N06035 Equal tee, UNS NO6035 reducing tee, UNS N06035 lateral tee, UNS N06035 BW/butt weld tee, UNS N06035 threaded tee, UNS N06035 SW/socket weld tee, UNS N06035 seamless tee

The type of UNS N06035 crosses that we could do is as follows:UNS N06035 Equal cross,UNS N06035 Straight cross,UNS N06035 Reducing cross,UNS N06035 Lateral cross,UNS N06035 Seamless cross,UNS N06035 Welded cross,UNS N06035 BW/butt welding cross, UNS N06035 threaded cross

The surface finish of UNS N06035 elbows,reducer,tees,stud end,crosses is  sandblasting,paint black lacquer or transparent oil on surface to prevent corrosion as per the requirement of the clients

We could produce UNS N06035 pipe fitting,UNS N06035 elbows,UNS N06035  reducer,UNS NO6035 tees,UNS N06035 stud end,UNS N06035 crosses as per the standard of ASME/ANSI B16.9, ANSI/ASME B16.11, ANSI/ASME B16.5;JIS B2201,JIS B2202,JIS B2203,JIS B2206;MSS SP-43, MSS SP-95, MSS SP-75, MSS SP-79; ISO 3419,ISO 5251,DIN 2616SY/T 0510, SH 3408, SH3410

Following is our capacity in produce UNS N06035 Pipe Fittings: Elbow machine up to 20inch,Reducing elbow moulds 2inch to 12inch,Elbow double beveling machine

,Tee machine 1500tons,Cross from 4inch to 10inch,Big shotblasting machine, Pneumatic marking machine

UNS N06035 possesses moderate resistance to reducing acids, as a result of its appreciable molybdenum content, and, unlike other nickel-chromium-molybdenum alloys,it is very resistant to “caustic dealloying” in hot sodium hydroxide.


The chemical composition of UNS N06035 pipe fitting,UNS NO6035 elbows,UNS N06035 reducer,UNS N06035 tees,UNS N06035 stud end,UNS N06035 crosses is as follows

Chemical  Composition, Weight Percent

Nickel

Chrominium

Mobydenum

Iron

Silcon

Manganese

Aluminium

Carhon



BAL

33

8

2**

0.6**

0.5**

0.4**

0.05**



The mechanical property of UNS N06035 pipe fitting,UNS N06035 elbows,UNS N06035 reducer,UNS NO6035 tees,UNS N06035 stud end,UNS N06035 crosses is as follows

Room Temperature  Tensile Data

Form

Annealing Temperature

Thickness/ Diameter

0.2% Offset Yield Strength

Ultimate Tensile Strength

Elongation



°C

°F

mm

in

MPa

ksi

MPa

ksi

%



1135

2075

3.2

0.125

348

50.5

745

108.0

59.0

1121

2050

6.4

0.25

344

49.9

703

102.0

66.0

1121

2050

12.7

0.5

318

46.1

689

100.0

72.0



our UNS N06035 pipe fittings,UNS N06035 Butt welding Pipe fittings are widely used in Water Treatment Plants,Filtration Equipment Manufacturers,Pump Manufacturers,Purification Systems,Water Utility Companies,Sludge Treatment Plants,Desalination Plants,Reverse Osmosis Plants,Water Reuse Installations,Vintage Steam Engine Maintenance.Military Vehicle Producers,Automotive Component Manufacturers.Track Component Manufacturers and so on

We will do Visual inspection,Dimensional inspection,Hardness test,Ultrasonic test,Magnetic particle test,Material identification (marking) for every piece of UNS N06035 Pipe Fittings

We could supply UNS N06035 pipe fitting inspection certificate as per the standard of en10204-3.1 or En10204-3.2 by third party like(TUV,DNV,GL and so on)

Please send us the size or drawing of UNS N06035 pipe fittings,UNS N06035 Butt welding Pipe fittings,UNS N06035 elbows,UNS N06035 reducer,UNS N06035 tees,UNS N06035 Stub end,UNS N06035 crosses, UNS N06035 couplings, UNS N06035 nipples,UNS N06035 bend,UNS N06035 weldolets,UNS N06035 caps,UNS N06035 outlet,UNS N06035 swage nipple,UNS N06035 sockolet that you need, we are glad to qote the best price for your side

Except UNS N06035 pipe fittings,we also could produce UNS N06035 flanges,UNS N06035 plates,UNS N06035 fastener,UNS N06035 bolts,UNS N06035 bars,UNS N06035 pipes,UNS N06035 tubes,UNS N06035 springs