Products

UNS N05502 Fittings
Home > Products > Pipe Fittings

We could produce UNS N05502 fittings,UNS N05502 Butt welding Pipe fittings,UNS N05502 butt weld fittings,UNS NO5502 butt welded fittings. UNS N05502 elbows,UNS NO5502 elbows,UNS N05502 reducer,UNS NO5502 reducers,UNS NO5502 tees,UNS N05502 tees,UNS N05502 Stub end,UNS N05502 crosses, UNS N05502 couplings, UNS N05502 nipples,UNS N05502 bend,UNS NO5502 weldolets,UNS N05502 caps,UNS N05502 outlet,UNS N05502 swage nipple,UNS N05502 sockolet from china

The type of UNS N05502 elbows that we could do is as follows:UNS N05502 90 degree Elbow,UNS NO5502 45 degree Elbow,UNS N05502 180 degree elbows,UNS N05502 socket elbows,UNS N05502 Butt welding/BW elbow, Socket welding/SW elbow, UNS N05502 Threaded elbow, UNS N05502 seamless elbow, UNS N05502 welded elbow.

The type of UNS N05502 reducer that we could do is as follows: UNS NO5502 Seamless reducer,UNS NO5502 Welded reducer,UNS N05502 Concentric reducer, UNS N05502 Eccentric reducer, UNS N05502 butt welding reducer,UNS NO5502 forged reducer,UNS N05502 forging reducer,UNS N05502 welding reducer;

The Wall thickness of UNS N05502 reducer that we could do range from Sch5~Sch160\XXS

The type of UNS N05502 tees that we could do is as follows:UNS N05502 Equal tee, UNS NO5502 reducing tee, UNS N05502 lateral tee, UNS N05502 BW/butt weld tee, UNS N05502 threaded tee, UNS N05502 SW/socket weld tee, UNS N05502 seamless tee

The type of UNS N05502 crosses that we could do is as follows:UNS N05502 Equal cross,UNS N05502 Straight cross,UNS N05502 Reducing cross,UNS N05502 Lateral cross,UNS N05502 Seamless cross,UNS N05502 Welded cross,UNS N05502 BW/butt welding cross, UNS N05502 threaded cross

The surface finish of UNS N05502 elbows,reducer,tees,stud end,crosses is  sandblasting,paint black lacquer or transparent oil on surface to prevent corrosion as per the requirement of the clients

We could produce UNS N05502 pipe fitting,UNS N05502 elbows,UNS N05502  reducer,UNS NO5502 tees,UNS N05502 stud end,UNS N05502 crosses as per the standard of ASME/ANSI B16.9, ANSI/ASME B16.11, ANSI/ASME B16.5;JIS B2201,JIS B2202,JIS B2203,JIS B2206;MSS SP-43, MSS SP-95, MSS SP-75, MSS SP-79; ISO 3419,ISO 5251,DIN 2616SY/T 0510, SH 3408, SH3410

Following is our capacity in produce UNS N05502 Pipe Fittings: Elbow machine up to 20inch,Reducing elbow moulds 2inch to 12inch,Elbow double beveling machine

,Tee machine 1500tons,Cross from 4inch to 10inch,Big shotblasting machine, Pneumatic marking machine

UNS N05502 is nickel-copper alloy, similar to Monel K500, has better machinability.


The chemical composition of UNS N05502 pipe fitting,UNS NO5502 elbows,UNS N05502 reducer,UNS N05502 tees,UNS N05502 stud end,UNS N05502 crosses is as follows

Element

Content (%)

Ni

63-70

Al

2.5-3.5

Fe

2 max

Mn

1.5 max

Ti

0.5 max

Si

0.5 max

C

0.1 max

S

0.01 max

Cu

Remainder


The mechanical property of UNS N05502 pipe fitting,UNS N05502 elbows,UNS N05502 reducer,UNS NO5502 tees,UNS N05502 stud end,UNS N05502 crosses is as follows

Properties

Metric

Tensile  strength

1158 MPa

Yield  strength

1034 MPa

Elastic  modulus

190-210 GPa

Poisson's  ratio

0.27-0.30

Elongation

15%

Reduction  of area

53%

Hardness

335


our UNS N05502 pipe fittings,UNS N05502 Butt welding Pipe fittings are widely used in mechanical engineering, in harbour cranes, ship deck cranes, truck cranes and construction cranes as well as in excavators, antenna systems, in aviation and aerospace, in the offshore technology, rail vehicles, telescopes, tunnelling machines, wind energy turbines, underwater turbines and solar energy plants and so on

We will do Visual inspection,Dimensional inspection,Hardness test,Ultrasonic test,Magnetic particle test,Material identification (marking) for every piece of UNS N05502 Pipe Fittings

We could supply UNS N05502 pipe fitting inspection certificate as per the standard of en10204-3.1 or En10204-3.2 by third party like(TUV,DNV,GL and so on)

Please send us the size or drawing of UNS N05502 pipe fittings,UNS N05502 Butt welding Pipe fittings,UNS N05502 elbows,UNS N05502 reducer,UNS N05502 tees,UNS N05502 Stub end,UNS N05502 crosses, UNS N05502 couplings, UNS N05502 nipples,UNS N05502 bend,UNS N05502 weldolets,UNS N05502 caps,UNS N05502 outlet,UNS N05502 swage nipple,UNS N05502 sockolet that you need, we are glad to qote the best price for your side

Except UNS N05502 pipe fittings,we also could produce UNS N05502 flanges,UNS N05502 plates,UNS N05502 fastener,UNS N05502 bolts,UNS N05502 bars,UNS N05502 pipes,UNS N05502 tubes,UNS N05502 springs