We could produce Ph13-8Mo pipe fittings,Ph13-8Mo Butt welding Pipe fittings,Ph13-8Mo butt weld fittings,Ph 13-8 Mo butt welded fittings. Ph13-8Mo elbows,Ph 13-8 Mo elbows,Ph13-8Mo reducer,Ph 13-8 Mo reducers,Ph 13-8 Mo tees,Ph13-8Mo tees,Ph13-8Mo Stub end,Ph13-8Mo crosses, Ph13-8Mo couplings, Ph13-8Mo nipples,Ph13-8Mo bend,Ph 13-8 Mo weldolets,Ph13-8Mo caps,Ph13-8Mo outlet,Ph13-8Mo swage nipple,Ph13-8Mo sockolet from china
The type of Ph13-8Mo elbows that we could do is as follows:Ph13-8Mo 90 degree Elbow,Ph 13-8 Mo 45 degree Elbow,Ph13-8Mo 180 degree elbows,Ph13-8Mo socket elbows,Ph13-8Mo Butt welding/BW elbow, Socket welding/SW elbow, Ph13-8Mo Threaded elbow, Ph13-8Mo seamless elbow, Ph13-8Mo welded elbow.
The type of Ph13-8Mo reducer that we could do is as follows: Ph 13-8 Mo Seamless reducer,Ph 13-8 Mo Welded reducer,Ph13-8Mo Concentric reducer, Ph13-8Mo Eccentric reducer, Ph13-8Mo butt welding reducer,Ph 13-8 Mo forged reducer,Ph13-8Mo forging reducer,Ph13-8Mo welding reducer;
The Wall thickness of Ph13-8Mo reducer that we could do range from Sch5~Sch160\XXS
The type of Ph13-8Mo tees that we could do is as follows:Ph13-8Mo Equal tee, Ph 13-8 Mo reducing tee, Ph13-8Mo lateral tee, Ph13-8Mo BW/butt weld tee, Ph13-8Mo threaded tee, Ph13-8Mo SW/socket weld tee, Ph13-8Mo seamless tee
The type of Ph13-8Mo crosses that we could do is as follows:Ph13-8Mo Equal cross,Ph13-8Mo Straight cross,Ph13-8Mo Reducing cross,Ph13-8Mo Lateral cross,Ph13-8Mo Seamless cross,Ph13-8Mo Welded cross,Ph13-8Mo BW/butt welding cross, Ph13-8Mo threaded cross
The surface finish of Ph13-8Mo elbows,reducer,tees,stud end,crosses is  sandblasting,paint black lacquer or transparent oil on surface to prevent corrosion as per the requirement of the clients
We could produce Ph13-8Mo pipe fitting,Ph13-8Mo elbows,Ph13-8Mo  reducer,Ph 13-8 Mo tees,Ph13-8Mo stud end,Ph13-8Mo crosses as per the standard of ASME/ANSI B16.9, ANSI/ASME B16.11, ANSI/ASME B16.5;JIS B2201,JIS B2202,JIS B2203,JIS B2206;MSS SP-43, MSS SP-95, MSS SP-75, MSS SP-79; ISO 3419,ISO 5251,DIN 2616SY/T 0510, SH 3408, SH3410
Ph13-8Mo is a precipitation hardened, vacuum melted stainless steel alloy

The chemical composition of Ph13-8Mo pipe fitting,Ph 13-8 Mo elbows,Ph13-8Mo  reducer,Ph13-8Mo tees,Ph13-8Mo stud end,Ph13-8Mo crosses is as follows

CHEMICAL RANGE
Element	Minimum	Maximum
Al	0.9	1.35
C	--	0.05
Cr	12.25	13.25
Fe	Balance	--
Mn	--	0.2
Mo	2	2.5
Ni	7.5	8.5
N	--	0.01
P	--	0.01
Si	--	0.1
S	--	0.008

The mechanical property of Ph13-8Mo pipe fitting,Ph13-8Mo elbows,Ph13-8Mo  reducer,Ph 13-8 Mo tees,Ph13-8Mo stud end,Ph13-8Mo crosses is as follows

Typical Mechanical Properties

0.2% proof Stress Tensile Strength Elongation Reduction of area Hardnesss KSI KSI % % HRC Min Min Min Min Min L T H950 206 222 10 45 35 45 H1000 191 206 10 60 40 43 H1025 176 186 11 50 45 41 H1050 166 176 12 50 45 40 H1100 136 151 14 50 50 34 H1150 91 136 14 50 50 30

our Ph13-8Mo pipe fittings,Ph13-8Mo Butt welding Pipe fittings are widely used in Drilling & Boring Equipment ,Wellhead Manufacture,Repair or Servicing Companies,Pipeline Construction & Repair.Pumping & Refining Equipment,Oil Extraction Systems,Oil Rig Construction,Repair & Maintenance Subcontractors ,Upstream, Midstream or Downstream Service Providers .Isolation Valves & Choke Equipment Manufacturers,Submersible Watercraft and so on

We could supply Ph13-8Mo pipe fitting inspection certificate as per the standard of en10204-3.1 or En10204-3.2 by third party like(TUV,DNV,GL and so on)
Please send us the size or drawing of Ph13-8Mo pipe fittings,Ph13-8Mo Butt welding Pipe fittings,Ph13-8Mo elbows,Ph13-8Mo reducer,Ph13-8Mo tees,Ph13-8Mo Stub end,Ph13-8Mo crosses, Ph13-8Mo couplings, Ph13-8Mo nipples,Ph13-8Mo bend,Ph13-8Mo weldolets,Ph13-8Mo caps,Ph13-8Mo outlet,Ph13-8Mo swage nipple,Ph13-8Mo sockolet that you need, we are glad to qote the best price for your side
Except Ph13-8Mo pipe fittings,we also could produce Ph13-8Mo flanges,Ph13-8Mo plates,Ph13-8Mo fasteners,Ph13-8Mo bolts,Ph13-8Mo bars,Ph13-8Mo pipes,Ph13-8Mo tubes,Ph13-8Mo springs