We could produce Nitronic 60 pipe fittings,Nitronic 60 Butt welding Pipe fittings,Nitronic 60 butt weld fittings,Nitronic60 butt welded fittings. Nitronic 60 elbows,Nitronic60 elbows,Nitronic 60 reducer,Nitronic60 reducers,Nitronic60 tees,Nitronic 60 tees,Nitronic 60 Stub end,Nitronic 60 crosses, Nitronic 60 couplings, Nitronic 60 nipples,Nitronic 60 bend,Nitronic60 weldolets,Nitronic 60 caps,Nitronic 60 outlet,Nitronic 60 swage nipple,Nitronic 60 sockolet from china
The type of Nitronic 60 elbows that we could do is as follows:Nitronic 60 90 degree Elbow,Nitronic60 45 degree Elbow,Nitronic 60 180 degree elbows,Nitronic 60 socket elbows,Nitronic 60 Butt welding/BW elbow, Socket welding/SW elbow, Nitronic 60 Threaded elbow, Nitronic 60 seamless elbow, Nitronic 60 welded elbow.
The type of Nitronic 60 reducer that we could do is as follows: Nitronic60 Seamless reducer,Nitronic60 Welded reducer,Nitronic 60 Concentric reducer, Nitronic 60 Eccentric reducer, Nitronic 60 butt welding reducer,Nitronic60 forged reducer,Nitronic 60 forging reducer,Nitronic 60 welding reducer;
The Wall thickness of Nitronic 60 reducer that we could do range from Sch5~Sch160\XXS
The type of Nitronic 60 tees that we could do is as follows:Nitronic 60 Equal tee, Nitronic60 reducing tee, Nitronic 60 lateral tee, Nitronic 60 BW/butt weld tee, Nitronic 60 threaded tee, Nitronic 60 SW/socket weld tee, Nitronic 60 seamless tee
The type of Nitronic 60 crosses that we could do is as follows:Nitronic 60 Equal cross,Nitronic 60 Straight cross,Nitronic 60 Reducing cross,Nitronic 60 Lateral cross,Nitronic 60 Seamless cross,Nitronic 60 Welded cross,Nitronic 60 BW/butt welding cross, Nitronic 60 threaded cross
The surface finish of Nitronic 60 elbows,reducer,tees,stud end,crosses is  sandblasting,paint black lacquer or transparent oil on surface to prevent corrosion as per the requirement of the clients
We could produce Nitronic 60 pipe fitting,Nitronic 60 elbows,Nitronic 60  reducer,Nitronic60 tees,Nitronic 60 stud end,Nitronic 60 crosses as per the standard of ASME/ANSI B16.9, ANSI/ASME B16.11, ANSI/ASME B16.5;JIS B2201,JIS B2202,JIS B2203,JIS B2206;MSS SP-43, MSS SP-95, MSS SP-75, MSS SP-79; ISO 3419,ISO 5251,DIN 2616SY/T 0510, SH 3408, SH3410
Nitronic 60 is considerably stronger than the conventional 300 series stainless steels but the same fabrication equipment and techniques are utilized.

The chemical composition of Nitronic 60 pipe fitting,Nitronic60 elbows,Nitronic 60  reducer,Nitronic 60 tees,Nitronic 60 stud end,Nitronic 60 crosses is as follows

Chemical Composition

Grade	C%	Mn%	S%	P%	Si%	Cr%	Ni%	N%
Nitronic 60	Max 0.10	7.0-9.0	Max 0.03	Max 0.04	3.5-4.5	16.0-18.0	8.0-9.0	0.08-0.18

The mechanical property of Nitronic 60 pipe fitting,Nitronic 60 elbows,Nitronic 60  reducer,Nitronic60 tees,Nitronic 60 stud end,Nitronic 60 crosses is as follows

Mechanical Properties (Solution Treated)

Property	Value
Tensile Strength	105 ksi
Yield Strength at 0.2% Offset	55 ksi
Elongation in 4D	35%
Reduction of Area	55%

our Nitronic 60 pipe fittings,Nitronic 60 Butt welding Pipe fittings are widely used in Heat shields,Combustion and chimney liners,Valves,Piping,Distillation columns,Bubble caps,Reaction vessels Heat exchangers,Furnace,Gas turbine engine duct work,Equipment used to produce acid and so on

We could supply Nitronic 60 pipe fitting inspection certificate as per the standard of en10204-3.1 or En10204-3.2 by third party like(TUV,DNV,GL and so on)
Please send us the size or drawing of Nitronic 60 pipe fittings,Nitronic 60 Butt welding Pipe fittings,Nitronic 60 elbows,Nitronic 60 reducer,Nitronic 60 tees,Nitronic 60 Stub end,Nitronic 60 crosses, Nitronic 60 couplings, Nitronic 60 nipples,Nitronic 60 bend,Nitronic 60 weldolets,Nitronic 60 caps,Nitronic 60 outlet,Nitronic 60 swage nipple,Nitronic 60 sockolet that you need, we are glad to qote the best price for your side
Except Nitronic 60 pipe fittings,we also could produce Nitronic 60 flanges,Nitronic 60 plates,Nitronic 60 fasteners,Nitronic 60 bolts,Nitronic 60 bars,Nitronic 60 pipes,Nitronic 60 tubes,Nitronic 60 springs