Products

Inconel 783 Fittings
Home > Products > Pipe Fittings

We could produce Inconel 783 fittings,Inconel 783 Butt welding Pipe fittings,Inconel 783 butt weld fittings,Inconel783 butt welded fittings. Inconel 783 elbows,Inconel783 elbows,Inconel 783 reducer,Inconel783 reducers,Inconel783 tees,Inconel 783 tees,Inconel 783 Stub end,Inconel 783 crosses, Inconel 783 couplings, Inconel 783 nipples,Inconel 783 bend,Inconel783 weldolets,Inconel 783 caps,Inconel 783 outlet,Inconel 783 swage nipple,Inconel 783 sockolet from china

The type of Inconel 783 elbows that we could do is as follows:Inconel 783 90 degree Elbow,Inconel783 45 degree Elbow,Inconel 783 180 degree elbows,Inconel 783 socket elbows,Inconel 783 Butt welding/BW elbow, Socket welding/SW elbow, Inconel 783 Threaded elbow, Inconel 783 seamless elbow, Inconel 783 welded elbow.

The type of Inconel 783 reducer that we could do is as follows: Inconel783 Seamless reducer,Inconel783 Welded reducer,Inconel 783 Concentric reducer, Inconel 783 Eccentric reducer, Inconel 783 butt welding reducer,Inconel783 forged reducer,Inconel 783 forging reducer,Inconel 783 welding reducer;

The Wall thickness of Inconel 783 reducer that we could do range from Sch5~Sch160\XXS

The type of Inconel 783 tees that we could do is as follows:Inconel 783 Equal tee, Inconel783 reducing tee, Inconel 783 lateral tee, Inconel 783 BW/butt weld tee, Inconel 783 threaded tee, Inconel 783 SW/socket weld tee, Inconel 783 seamless tee

The type of Inconel 783 crosses that we could do is as follows:Inconel 783 Equal cross,Inconel 783 Straight cross,Inconel 783 Reducing cross,Inconel 783 Lateral cross,Inconel 783 Seamless cross,Inconel 783 Welded cross,Inconel 783 BW/butt welding cross, Inconel 783 threaded cross

The surface finish of Inconel 783 elbows,reducer,tees,stud end,crosses is  sandblasting,paint black lacquer or transparent oil on surface to prevent corrosion as per the requirement of the clients

We could produce Inconel 783 pipe fitting,Inconel 783 elbows,Inconel 783  reducer,Inconel783 tees,Inconel 783 stud end,Inconel 783 crosses as per the standard of ASME/ANSI B16.9, ANSI/ASME B16.11, ANSI/ASME B16.5;JIS B2201,JIS B2202,JIS B2203,JIS B2206;MSS SP-43, MSS SP-95, MSS SP-75, MSS SP-79; ISO 3419,ISO 5251,DIN 2616SY/T 0510, SH 3408, SH3410

Following is our capacity in produce Inconel 783 Pipe Fittings: Elbow machine up to 20inch,Reducing elbow moulds 2inch to 12inch,Elbow double beveling machine

,Tee machine 1500tons,Cross from 4inch to 10inch,Big shotblasting machine, Pneumatic marking machine

Inconel 783 is an oxidation-resistant, low expansion, nickel-cobalt-iron alloy with aluminum, chromium, and niobium additions.

The chemical composition of Inconel 783 pipe fitting,Inconel783 elbows,Inconel 783 reducer,Inconel 783 tees,Inconel 783 stud end,Inconel 783 crosses is as follows

Element

Content (%)

Ni

26-30

Fe

24-27

Al

5-6

Cr

2.5-3.5

Nb

2.5-3.5

Cu

0.50 max

Mn

0.50 max

Si

0.50 max

Ti

0.10-0.40

C

0.03 max

B

0.003-0.012

P

0.015 max

S

0.005 max

Co

Balance


The mechanical property of Inconel 783 pipe fitting,Inconel 783 elbows,Inconel 783 reducer,Inconel783 tees,Inconel 783 stud end,Inconel 783 crosses is as follows

Properties

Metric

Tensile  strength

173130 PSI

Yield  strength

112955 PSI

Poisson’s  ratio

0.31

Elastic  modulus

177.3 GPA

Elongation  at break

24%


our Inconel 783 pipe fittings,Inconel 783 Butt welding Pipe fittings are widely used in Condensers, Rotary Vacuum Dryers,Flavor Processing ,Equipment,Slurry Tanks.Surge Tanks,Boilers & Boiler ancillary equipments.Heat Exchanger & Coils,Continuous Steam Sterilizer.Conveyor Dryer,Gass liquied Fermenters.Static Mixer.Twin Sharft Dispersers,crystalizer equipment,Wellhead and Christmas tree. power transmission, turbine,gas compressor,gear boxes and so on

We will do Visual inspection,Dimensional inspection,Hardness test,Ultrasonic test,Magnetic particle test,Material identification (marking) for every piece of Inconel 783 Pipe Fittings

We could supply Inconel 783 pipe fitting inspection certificate as per the standard of en10204-3.1 or En10204-3.2 by third party like(TUV,DNV,GL and so on)

Please send us the size or drawing of Inconel 783 pipe fittings,Inconel 783 Butt welding Pipe fittings,Inconel 783 elbows,Inconel 783 reducer,Inconel 783 tees,Inconel 783 Stub end,Inconel 783 crosses, Inconel 783 couplings, Inconel 783 nipples,Inconel 783 bend,Inconel 783 weldolets,Inconel 783 caps,Inconel 783 outlet,Inconel 783 swage nipple,Inconel 783 sockolet that you need, we are glad to qote the best price for your side

Except Inconel 783 pipe fittings,we also could produce Inconel 783 flanges,Inconel 783 plates,Inconel 783 fastener,Inconel 783 bolts,Inconel 783 bars,Inconel 783 pipes,Inconel 783 tubes,Inconel 783 springs