Products

Inconel 725 Pipe Fittings
Home > Products > Pipe Fittings

We could produce inconel 725 pipe fittings,inconel 725 Butt welding Pipe fittings,Inconel 725 butt weld fittings,inconel725 butt welded fittings, inconel 725 elbows,inconel725 elbows,inconel 725 reducer,inconel725 reducers,inconel725 tees,inconel 725 tees,inconel 725 Stub end,inconel 725 crosses, inconel 725 couplings, inconel 725 nipples,inconel 725 bend,inconel 725 weldolets,inconel 725 caps,inconel 725 outlet,inconel 725 swage nipple,inconel 725 sockolet from china

The type of inconel 725 elbows that we could do is as follows:inconel 725 90 degree Elbow,inconel 725 45 degree Elbow,inconel 725 180 degree elbows,inconel 725 socket elbows,inconel 725 Butt welding/BW elbow, Socket welding/SW elbow, inconel 725 Threaded elbow, inconel 725 seamless elbow, inconel 725 welded elbow.

The type of inconel 725 reducer that we could do is as follows: inconel 725 Seamless reducer,inconel 725 Welded reducer,inconel 725 Concentric reducer, inconel 725 Eccentric reducer, inconel 725 butt welding reducer,inconel 725 forged reducer,inconel 725 forging reducer,inconel 725 welding reducer;

The Wall thickness of inconel 725 reducer that we could do range from Sch5~Sch160\XXS

The type of inconel 725 tees that we could do is as follows:inconel 725 Equal tee, inconel 725 reducing tee, inconel 725 lateral tee, inconel 725 BW/butt weld tee, inconel 725 threaded tee, inconel 725 SW/socket weld tee, inconel 725 seamless tee

The type of inconel 725 crosses that we could do is as follows:inconel 725 Equal cross,inconel 725 Straight cross,inconel 725 Reducing cross,inconel 725 Lateral cross,inconel 725 Seamless cross,inconel 725 Welded cross,inconel 725BW/butt welding cross, inconel 725 threaded cross

The surface finish of inconel 725 elbows,reducer,tees,stud end,crosses is  sandblasting,paint black lacquer or transparent oil on surface to prevent corrosion as per the requirement of the clients

We could produce inconel 725 pipe fitting,inconel 725 elbows,inconel 725  reducer,inconel 725 tees,inconel 725 stud end,inconel 725 crosses as per the standard of ASME/ANSI B16.9, ANSI/ASME B16.11, ANSI/ASME B16.5;JIS B2311,JIS B2312,JIS B2313,JIS B2316;MSS SP-43, MSS SP-95, MSS SP-75, MSS SP-79; ISO 3419,ISO 5251,DIN 2616SY/T 0510, SH 3408, SH3410

Inconel 725 is an age hardenable alloy

The chemical composition of inconel 725 pipe fitting,inconel 725 elbows,inconel 725  reducer,inconel 725 tees,inconel 725 stud end,inconel 725 crosses is as follows

Nominal Composition

Element

Weight %

C

0.03 max

Si

0.20

Mn

0.35

P

0.015 max

S

0.01 max

Mo

7.0 – 9.5

Cr

19.0 – 22.5

Ni

55.0 – 59.0 max

Al

0.35

Ti

1.0 – 1.7

NB + TA

2.75 – 4.00

Fe

Balance

The mechanical property of inconel 725 pipe fitting,inconel 725 elbows,inconel 725  reducer,inconel 725 tees,inconel 725 stud end,inconel 725 crosses is as follows

Condition: Solutionannealed followed by age hardening

Property

Typical Values

Ultimate Tensile  Strength

140 min Ksi

0.2 % Yield Strength

120 min Ks

Elongation

20 % min

Reduction of Area

35 % min

Charpy Impact Toughness

40J mean at 20o C

Hardness

43 HRc max

our inconel 725 pipe fittings,inconel 725 Butt welding Pipe fittings are widely used in Continuous Steam Sterilizer,Chamber Dryer.Size Cooker.Hydro Extractor,Petroleum Refining  fluid catalytic cracking units,high-pressure (microbial) deep-sea sampler and incubation chambers,Mixing tanks,CNG Storage.LNG Cryogenics,Scrubbers and so on

We could supply inconel 725 pipe fitting inspection certificate as per the standard of en10204-3.1 or En10204-3.2 by third party like(TUV,DNV,GL and so on)

Please send us the size or drawing of inconel 725 pipe fittings,inconel 725 Butt welding Pipe fittings,inconel 725 elbows,inconel 725 reducer,inconel 725 tees,inconel 725 Stub end,inconel 725 crosses, inconel 725 couplings, inconel 725 nipples,inconel 725 bend,inconel 725 weldolets,inconel 725 caps,inconel 725 outlet,inconel 725 swage nipple,inconel 725 sockolet that you need, we are glad to qote the best price for your side

Except inconel 725 pipe fittings,we also could produce inconel 725 flanges,inconel 725 plates,inconel 725 fastener,inconel 725 bolts,inconel 725 bars,inconel 725 pipes,inconel 725 tubes,inconel 725 springs