Products

353MA Pipe Fittings
Home > Products > Pipe Fittings

We could produce 353MA pipe fittings,353MA Butt welding Pipe fittings,353MA butt weld fittings,353 MA butt welded fittings. 353MA elbows,353 MA elbows,353MA reducer,353 MA reducers,353 MA tees,353MA tees,353MA Stub end,353MA crosses, 353MA couplings, 353MA nipples,353MA bend,353 MA weldolets,353MA caps,353MA outlet,353MA swage nipple,353MA sockolet from china
The type of 353MA elbows that we could do is as follows:353MA 90 degree Elbow,353 MA 45 degree Elbow,353MA 180 degree elbows,353MA socket elbows,353MA Butt welding/BW elbow, Socket welding/SW elbow, 353MA Threaded elbow, 353MA seamless elbow, 353MA welded elbow.
The type of 353MA reducer that we could do is as follows: 353 MA Seamless reducer,353 MA Welded reducer,353MA Concentric reducer, 353MA Eccentric reducer, 353MA butt welding reducer,353 MA forged reducer,353MA forging reducer,353MA welding reducer;
The Wall thickness of 353MA reducer that we could do range from Sch5~Sch160\XXS
The type of 353MA tees that we could do is as follows:353MA Equal tee, 353 MA reducing tee, 353MA lateral tee, 353MA BW/butt weld tee, 353MA threaded tee, 353MA SW/socket weld tee, 353MA seamless tee
The type of 353MA crosses that we could do is as follows:353MA Equal cross,353MA Straight cross,353MA Reducing cross,353MA Lateral cross,353MA Seamless cross,353MA Welded cross,353MA BW/butt welding cross, 353MA threaded cross
The surface finish of 353MA elbows,reducer,tees,stud end,crosses is  sandblasting,paint black lacquer or transparent oil on surface to prevent corrosion as per the requirement of the clients
We could produce 353MA pipe fitting,353MA elbows,353MA  reducer,353 MA tees,353MA stud end,353MA crosses as per the standard of ASME/ANSI B16.9, ANSI/ASME B16.11, ANSI/ASME B16.5;JIS B2201,JIS B2202,JIS B2203,JIS B2206;MSS SP-43, MSS SP-95, MSS SP-75, MSS SP-79; ISO 3419,ISO 5251,DIN 2616SY/T 0510, SH 3408, SH3410
353MA contains fairly low nickel content, which gives it some advantage in reducing sulphide atmospheres when compared to high nickel alloys and to Grade 310.

The chemical composition of 353MA pipe fitting,353 MA elbows,353MA  reducer,353MA tees,353MA stud end,353MA crosses is as follows

C

0.05 - 0.1

Ce

0.03 - 0.08

Cr

20 - 22

Fe

Balance

Mn

0.8 max

Ni

10 - 12

N

0.14 - 0.2

P

0.04 max

Si

1.4 - 2

S

0.03 max


The mechanical property of 353MA pipe fitting,353MA elbows,353MA  reducer,353 MA tees,353MA stud end,353MA crosses is as follows

Mechanical Properties
Room Temperature

Specified Limits Minimum

Ultimate Tensile Strength, KSI

88

.2% Offset Yield Strength, KSI

45

Elongation in 2", %

40

Reduction of Area, %

50

Hardness Rockwell B

-


our 353MA pipe fittings,353MA Butt welding Pipe fittings are widely used in EPC,Refineries,Chemical & Petrochemical Industry,Power Plants,Offshore & On Shore,Docks,Engineering & Fabrication Units,Oil and Gas Industry,Ship Building Industry,Water Treatment Plants,Fertilizers Industry.Sugar Company and so on

We could supply 353MA pipe fitting inspection certificate as per the standard of en10204-3.1 or En10204-3.2 by third party like(TUV,DNV,GL and so on)
Please send us the size or drawing of 353MA pipe fittings,353MA Butt welding Pipe fittings,353MA elbows,353MA reducer,353MA tees,353MA Stub end,353MA crosses, 353MA couplings, 353MA nipples,353MA bend,353MA weldolets,353MA caps,353MA outlet,353MA swage nipple,353MA sockolet that you need, we are glad to qote the best price for your side
Except 353MA pipe fittings,we also could produce 353MA flanges,353MA plates,353MA fasteners,353MA bolts,353MA bars,353MA pipes,353MA tubes,353MA springs