Products

310S Pipe Fittings
Home > Products > Pipe Fittings

We could produce 310S pipe fittings,310S Butt welding Pipe fittings,310S butt weld fittings,310 S butt welded fittings. 310S elbows,310 S elbows,310S reducer,310 S reducers,310 S tees,310S tees,310S Stub end,310S crosses, 310S couplings, 310S nipples,310S bend,310 S weldolets,310S caps,310S outlet,310S swage nipple,310S sockolet from china

The type of 310S elbows that we could do is as follows:310S 90 degree Elbow,310 S 45 degree Elbow,310S 180 degree elbows,310S socket elbows,310S Butt welding/BW elbow, Socket welding/SW elbow, 310S Threaded elbow, 310S seamless elbow, 310S welded elbow.

The type of 310S reducer that we could do is as follows: 310 S Seamless reducer,310 S Welded reducer,310S Concentric reducer, 310S Eccentric reducer, 310S butt welding reducer,310 S forged reducer,310S forging reducer,310S welding reducer;

The Wall thickness of 310S reducer that we could do range from Sch5~Sch160\XXS

The type of 310S tees that we could do is as follows:310S Equal tee, 310 S reducing tee, 310S lateral tee, 310S BW/butt weld tee, 310S threaded tee, 310S SW/socket weld tee, 310S seamless tee

The type of 310S crosses that we could do is as follows:310S Equal cross,310S Straight cross,310S Reducing cross,310S Lateral cross,310S Seamless cross,310S Welded cross,310S BW/butt welding cross, 310S threaded cross

The surface finish of 310S elbows,reducer,tees,stud end,crosses is  sandblasting,paint black lacquer or transparent oil on surface to prevent corrosion as per the requirement of the clients

We could produce 310S pipe fitting,310S elbows,310S  reducer,310 S tees,310S stud end,310S crosses as per the standard of ASME/ANSI B16.9, ANSI/ASME B16.11, ANSI/ASME B16.5;JIS B2201,JIS B2202,JIS B2203,JIS B2206;MSS SP-43, MSS SP-95, MSS SP-75, MSS SP-79; ISO 3419,ISO 5251,DIN 2616SY/T 0510, SH 3408, SH3410

310S is a medium carbon austenitic stainless steel, for high temperature applications such as furnace parts and heat treatment equipment.


The chemical composition of 310S pipe fitting,310 S elbows,310S  reducer,310S tees,310S stud end,310S crosses is as follows

Cr

Ni

C

Si

Mn

24.0-26.0

19.2-22.0

.08 Max

1.50  Max

2.00  Max

P

S

Mo

Cu

Fe

.045  Max

.03  Max

.75  Max

.50  Max

Balance


The mechanical property of 310S pipe fitting,310S elbows,310S  reducer,310 S tees,310S stud end,310S crosses is as follows

SX 310S

Typical

Minimum

Tensile Strength, KSI

84

75

Yield Stress (0.2 % offset), KSI

42

30

Elongation (Percent in 50mm)

50

40

Hardness (Brinell)

156

-

Endurance (fatigue) limit, MPa

260

-


our 310S pipe fittings,310S Butt welding Pipe fittings are widely used in automotive, railroad, wind energy, construction equipment, mining machinery, medical equipment, aerospace, defense, general machinery etc


We could supply 310S pipe fitting inspection certificate as per the standard of en10204-3.1 or En10204-3.2 by third party like(TUV,DNV,GL and so on)

Please send us the size or drawing of 310S pipe fittings,310S Butt welding Pipe fittings,310S elbows,310S reducer,310S tees,310S Stub end,310S crosses, 310S couplings, 310S nipples,310S bend,310S weldolets,310S caps,310S outlet,310S swage nipple,310S sockolet that you need, we are glad to qote the best price for your side

Except 310S pipe fittings,we also could produce 310S flanges,310S plates,310S fasteners,310S bolts,310S bars,310S pipes,310S tubes,310S springs