Products

1.4886 Fittings
Home > Products > Pipe Fittings


We could produce 1.4886 pipe fittings,1.4886 Butt welding Pipe fittings,1.4886 butt weld fittings,EN 1.4886 butt welded fittings. 1.4886 elbows,EN 1.4886 elbows,1.4886 reducer,EN 1.4886 reducers,EN 1.4886 tees,1.4886 tees,1.4886 Stub end,1.4886 crosses, 1.4886 couplings, 1.4886 nipples,1.4886 bend,EN 1.4886 weldolets,1.4886 caps,1.4886 outlet,1.4886 swage nipple,1.4886 sockolet from china

The type of 1.4886 elbows that we could do is as follows:1.4886 90 degree Elbow,EN 1.4886 45 degree Elbow,1.4886 180 degree elbows,1.4886 socket elbows,1.4886 Butt welding/BW elbow, Socket welding/SW elbow, 1.4886 Threaded elbow, 1.4886 seamless elbow, 1.4886 welded elbow.

The type of 1.4886 reducer that we could do is as follows: EN 1.4886 Seamless reducer,EN 1.4886 Welded reducer,1.4886 Concentric reducer, 1.4886 Eccentric reducer, 1.4886 butt welding reducer,EN 1.4886 forged reducer,1.4886 forging reducer,1.4886 welding reducer;

The Wall thickness of 1.4886 reducer that we could do range from Sch5~Sch160\XXS

The type of 1.4886 tees that we could do is as follows:1.4886 Equal tee, EN 1.4886 reducing tee, 1.4886 lateral tee, 1.4886 BW/butt weld tee, 1.4886 threaded tee, 1.4886 SW/socket weld tee, 1.4886 seamless tee

The type of 1.4886 crosses that we could do is as follows:1.4886 Equal cross,1.4886 Straight cross,1.4886 Reducing cross,1.4886 Lateral cross,1.4886 Seamless cross,1.4886 Welded cross,1.4886 BW/butt welding cross, 1.4886 threaded cross

The surface finish of 1.4886 elbows,reducer,tees,stud end,crosses is  sandblasting,paint black lacquer or transparent oil on surface to prevent corrosion as per the requirement of the clients

We could produce 1.4886 pipe fitting,1.4886 elbows,1.4886  reducer,EN 1.4886 tees,1.4886 stud end,1.4886 crosses as per the standard of ASME/ANSI B16.9, ANSI/ASME B16.11, ANSI/ASME B16.5;JIS B2201,JIS B2202,JIS B2203,JIS B2206;MSS SP-43, MSS SP-95, MSS SP-75, MSS SP-79; ISO 3419,ISO 5251,DIN 2616SY/T 0510, SH 3408, SH3410

Following is our capacity in produce 1.4886 Pipe Fittings: Elbow machine up to 20inch,Reducing elbow moulds 2inch to 12inch,Elbow double beveling machine

,Tee machine 1500tons,Cross from 4inch to 10inch,Big shotblasting machine, Pneumatic marking machine

1.4886 is high in nickel and chromium that provides good resistance to carburization, oxidation, and nitridation


The chemical composition of 1.4886 pipe fitting,EN 1.4886 elbows,1.4886 reducer,1.4886 tees,1.4886 stud end,1.4886 crosses is as follows

Chemical Composition

Nickel..........................................................................34.0-37.0
Chromium....................................................................17.0-20.0
Iron ...............................................................................Balance*
Carbon........................................................................0.08max.
Silicon..........................................................................0.75-1.50
Manganese ...................................................................2.0max.
Phosphorus ..............................................................0.030max.
Sulfur........................................................................0.030max.


The mechanical property of 1.4886 pipe fitting,1.4886 elbows,1.4886 reducer,EN 1.4886 tees,1.4886 stud end,1.4886 crosses is as follows

Material

Ultimate Tensile Strength (ksi)

0.2 % Yield Strength (ksi)

% Elongation in 2"

Rockwell B Hardness

1.4886 Annealed

70

25

30

≤95


our 1.4886 pipe fittings,1.4886 Butt welding Pipe fittings are widely used in Continuous Steam Sterilizer,Chamber Dryer.Size Cooker.Hydro Extractor,Petroleum Refining  fluid catalytic cracking units,high-pressure (microbial) deep-sea sampler and incubation chambers,Mixing tanks,CNG Storage.LNG Cryogenics,Scrubbers and so on

We will do Visual inspection,Dimensional inspection,Hardness test,Ultrasonic test,Magnetic particle test,Material identification (marking) for every piece of 1.4886 Pipe Fittings

We could supply 1.4886 pipe fitting inspection certificate as per the standard of en10204-3.1 or En10204-3.2 by third party like(TUV,DNV,GL and so on)

Please send us the size or drawing of 1.4886 pipe fittings,1.4886 Butt welding Pipe fittings,1.4886 elbows,1.4886 reducer,1.4886 tees,1.4886 Stub end,1.4886 crosses, 1.4886 couplings, 1.4886 nipples,1.4886 bend,1.4886 weldolets,1.4886 caps,1.4886 outlet,1.4886 swage nipple,1.4886 sockolet that you need, we are glad to qote the best price for your side

Except 1.4886 pipe fittings,we also could produce 1.4886 flanges,1.4886 plates,1.4886 fastener,1.4886 bolts,1.4886 bars,1.4886 pipes,1.4886 tubes,1.4886 springs