Products

UNS S41500
Home > Products > Forgings

We are professional

ASTM SA-473 Sa473 A473 UNS S41500,SS 415,Type 415,AISI 415,ASTM 415 Forged forging Steel Round Bars Rods Square rectangular rectangle Flat Hex Bars,ASTM SA-473 Sa473 A473 UNS S41500,SS 415,Type 415,ASTM 415 Forged Forging Steel Hollow Bars Forged Forging Sleeves Bushes Bushing Pipes Piping tubes tubings barrels Casing Cases Shells cylinders hubs housings,ASTM SA-473 Sa473 A473 UNS S41500,SS 415,Type 415,ASTM 415 Forged Forging Steel Rings Seamless Rolled Steel Rings,ASTM SA-473 Sa473 A473 UNS S41500,SS 415,Type 415,ASTM 415 Forged Forging Steel Flanges Blocks Discs Disks Plates,ASTM SA-473 Sa473 A473 UNS S41500,SS 415,Type 415,ASTM 415 forged forging steel valve components,Valve Seats,valve stems,valve body bodies,valve bonnets,valve seat rings,ASTM SA-473 Sa473 A473 UNS S41500,SS 415,Type 415,ASTM 415 forgd forging steel pump,compressor components,Hydro-electric turbine systems,tools and dies for pressure die casting and other ASTM SA-473 Sa473 A473 UNS S41500,SS 415,Type 415,ASTM 415 forged forging forge Steel parts forged forging pieces forged forging steel components material  etc. from china



UNS S41500 steel is air hardening, with little danger of thick sections cracking during heat treatment.

In addition to limiting the maximum hardness allowed to 23 HRC max, NACE MR0175 imposes heat treatment temperature restrictions.


ASTM A182 specifies a minimum 0.2 PS value of 95 KSI. This NACE approved grade is limited to 75 KSI because of the hardness restriction.

Chemical composition

CSiMnPSCrNiMoFe
Min0.5011.503.500.500.00
Max0.050.601.000.0300.03014.005.501.000.00

Mechanical properties

Condition: Hardened and Double Tempered

NACE MR0175 limits the supply hardness to 23 HRC max.
U.T.S95 KSI Min(655 N/mm2)
0.2% Proof Stress75 KSI Min(517 N/mm2)
Elongation18 %
Red of Area35 %
CVN Impacts @ -60°C (-75°F)40 Joules(30 ft-lbf)