We could produce Incoloy Alloy 903 Inconel 903,Alloy 903 Inco 903 Forged forging Round Bars Rods Square rectangular rectangle turbine blades Flat Bars,Incoloy Alloy 903 Inconel 903,Alloy 903 Inco 903 Forged Forging Steel Hollow Bars Forged Forging Sleeves Bushes Bushing Pipes Piping tubes tubings barrels Casing Cases Shells cylinders hubs housings,Incoloy Alloy 903 Inconel 903,Alloy 903 Inco 903 Forged Forging Rings Seamless Rolled Steel Rings,Incoloy Alloy 903 Inconel 903,Alloy 903 Inco 903 forged forging Turbine Seals rings,Turbine casings, compressors Turbine shrouds,Incoloy Alloy 903 Inconel 903,Alloy 903 Inco 903 Forged Forging Steel Blocks Discs Disks Plates ,Incoloy Alloy 903 Inconel 903,Alloy 903 Inco 903 Forging forged steel Gas Steam Turbine Valve Spindles Stems Rods,Incoloy Alloy 903 Inconel 903,Alloy 903 Inco 903 Forged Forging steam turbine impeller wheels turbine discs disks blisks, and Incoloy Alloy 903 Inconel 903,Alloy 903 Inco 903 forged forging parts forged forging pieces forged forging steel components pieces material as per the requirement of the client

Incoloy Alloy 903 Inconel 903,Alloy 903 Inco 903 is an agehardenable nickel-iron-cobalt alloy whose outstanding characteristics are a constant low coefficient of thermal

expansion, a constant modulus of elasticity, and high strength. The nominal composition is shown in Table 1.

The alloy’s characteristics make it an excellent candidate for applications such as rocket-engine thrust chambers, steam-turbine bolts, springs, gage blocks, and ordnance hardware.

Table 1 - Limiting Composition, wt % of Incoloy Alloy 903 Inconel 903,Alloy 903 Inco 903

Nickel ..........................................................................36.0-40.0

Cobalt..........................................................................13.0-17.0

Aluminum ....................................................................0.30-1.15

Titanium.......................................................................1.00-1.85

Niobium.......................................................................2.40-3.50

Iron ...............................................................................Balance*

Incoloy Alloy 903 Inconel 903,Alloy 903 Inco 903 should be hot worked in the 1500-2050°F (815-1120°C)temperature range. For applications in which high stress-rupture properties are required, the alloy should be given a minimum of 40% reduction at temperatures of 1500 to 1600°F(816-871°C). When tensile properties govern, alloy 903 should be worked in the same manner as INCONEL alloy X-750.