Products

UNS S32109 Flanges
Home > Products > Flanges

We produce UNS S32109 flanges,S32109 flanges,UNS S32109 Blind Flanges,UNS S32109 Welding Neck Flanges,UNS S32109 Slip On Flanges,UNS S32109 Socket Welding Flanges,UNS S32109 Lap joint Flanges,UNS S32109 Ring joint Flanges,UNS S32109 Slip-on flanges,UNS S32109 Weld Neck Flanges,UNS S32109 WN flanges,UNS S32109 LWN flanges, UNS S32109 Long weld neck flanges,UNS S32109 orifice flanges,UNS S32109 Spectacle blind Flanges,S32109 Spectacle flanges, S32109 spacer ring flanges,UNS S32109 Swivel Ring Flanges,UNS S32109 WNRF Flanges,UNS S32109 SORF Flanges,UNS S32109 SWRF Flanges,UNS S32109 Threaded Flanges,UNS S32109 Ring Type Joint Flanges,UNS S32109 BLRF Flanges,UNS S32109 RTJ Flanges from china

The size of UNS S32109 flanges that we could do is from 1/2” – 96”, DN15-DN2000

We could produce UNS S32109 flanges with pressre from 150LB-2500LB or PN6-PN100

The face of UNS S32109 flanges that we could do is in Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

Also we could produce UNS S32109 flanges as per the drawing of the clients

Following is the standard of UNS S32109 flanges that we could do:

American standard of UNS S32109 flanges in ANSI B16.5 ;ASME B16.47 Series A(MSS SP-44);ASME B16.47 Series B(API 605);ANSI B16.1,AWWA C207

Germany standard of UNS S32109 flanges in DIN 2630,2620,2632,2633,2634,2635,2636,2637,2638,2501(WN);

DIN2573,2576,2527,2655,2656(PL);DIN2566.

British standard of UNS S32109 flanges in BS3293,BS4504,BS10

The Italy standard of S32109 flanges in UNI27676-67,UNI27677-67,UNI27678-67,UNI6083-67,UNI6084-67,,UNI6088-67,,UNI6089-67,UNI27699-67,,UNI2300-67,UNI27680-67,,UNI27681-67,,UNI27682-67,,UNI27683-67

Janpanese standard of UNS S32109 flanges in JIS B27620,

Korean Standard of UNS S32109 flanges in KSB 1503,KSB 6216,KSB 2332,KSB 2333,KSD 3578,KSD 4308.

Australian standard of UNS S32109 flanges in AS 4087,AS 2129,AS/NZS 4320.1

ISO standsard of UNS S32109 flanges in ISO 7005-1,ISO 9624

Russian standard of UNS S32109 flanges in GOST 12820,GOST 12821,GOST 12836,GOST 12820-80,GOST 12821-80,GOST 12836-80.

European standard of S32109 flanges in EN1092-1

South african standard of UNS S32109 flanges in SABS-1123/SANS-1123

As per surface treatment of S32109 flange, we could do Anti-rust Oil;Black /Yellow Paint;Hot-dipped Galvanization as per the requirement of the clients

The material grade of S32109 flanges is by forging as per the standard of ASTM B462.

We will do following testing to control the quality of UNS S32109 Flanges:Chemical Analysis,Corrosion Test,Tensile, Hardness, Flattening, Flare, Flange and Reverse-bend tests,Eddy Current Testing,Hydrostatic Testing,Air under Press Test,IGC Test (Inter Granular Corrosion Test),Micro-Structure Analysis,Radiography Test,Ultrasonic Test,Liquid Penetrate Test

We could do solution treatment, ageing treatment for UNS S32109 flanges as per the requirement of the clients

UNS S32109 is suitable for wet-corrosive service but also has good mechanical strength at high temperatures.

The chemical composition of UNS S32109 flanges is as follows

Element

Content (%)

Fe

Balance

Cr

17-19

Ni

9-12

Mn

2

Si

1

Ti

0.35

P

0.045

C

0.04-0.10

S

0.03


The mechanical property of UNS S32109 flanges is as follows

Properties

Metric

Tensile  strength

480 MPa

Yield  strength

205 MPa

Elongation  at break

29%

Hardness,  Brinell

≤187


We could supply material certificate of UNS S32109 flanges  as per the standard of EN10204-3.1 or EN10204-3.2 of third party(like TUV,DNV,GL and so on)

Our UNS S32109 flanges will be 100% Ultrasonic Inspection as per the forging parts UT Test standard of ASTM A 388 or EN102768.

Our UNS S32109 flanges are widely used in many industries,such as Vacuum Kettle Dryer.Cistern Piler.Vacuum Strainer,Agitators.Chemical Reactor and Systems,Expansion Tank.Water Tank,Lifting Station Tank,Air Drying Plants,Condensers,Balance Valves,Needle Valves,Twin Sharft Dispersers,Chemical and petroleum process equipment and so on


Ask for our Delivery Guarantee for our S32109 flanges, and we will offer a cumulative rebate of 1% for the 1st week late, 2% for the 2nd week late, etc., to a maximum of 10%. For example, a 3 week late delivery will yield a rebate of 6%. We are so sure our long delivery will be on time, we back it up with a financial guarantee.

In order to export our UNS S32109 Flanges, we will do Packing in  No Fumigate or Fumigate Plywood/Wood Pallet or Case as per the requirement of our clients

Please send us the drawing of UNS S32109 flanges, we are glad to quote the best price for your side.

Except UNS S32109 flanges,we also could produce UNS S32109 bars,UNS S32109 plates,UNS S32109 fastener,UNS S32109 bolts,UNS S32109 fittings,UNS S32109 pipes,UNS S32109 tubes,UNS S32109 springs