Products

Inconel 718 Flanges
Home > Products > Flanges

We produce inconel 718 flanges,inconel718 flanges,Inconel 718 Blind Flanges,inconel 718 Welding Neck Flanges,inconel 718 Slip On Flanges,inconel 718 Socket Welding Flanges,inconel 718 Lap joint Flanges,Inconel 718 Ring joint Flanges,inconel 718 Slip-on flanges,Inconel 718 Weld Neck Flanges,Inconel 718 WN flanges,Inconel 718 LWN flanges, Inconel 718 Long weld neck flanges,inconel 718 orifice flanges,inconel 718 Spectacle blind Flanges,inconel 718 Spectacle flanges, inconel 718 spacer ring flanges,inconel 718 Swivel Ring Flanges,inconel 718 WNRF Flanges,inconel 718 SORF Flanges,inconel 718 SWRF Flanges,inconel 718 Threaded Flanges,inconel 718 Ring Type Joint Flanges,inconel 718 BLRF Flanges,inconel 718 RTJ Flanges from china

The size of inconel 718 flanges that we could do is from 1/2” – 96”, DN15-DN2000

We could produce inconel 718 flanges with pressre from 150LB-2500LB or PN6-PN100

The face of inconel 718 flanges that we could do is in Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

Also we could produce inconel 718 flanges as per the drawing of the clients

Following is the standard of inconel 718 flanges that we could do:

American standard of inconel 718 flanges in ANSI B16.5 ;ASME B16.47 Series A(MSS SP-44);ASME B16.47 Series B(API 605);ANSI B16.1,AWWA C207

Germany standard of inconel 718 flanges in DIN 2630,2631,2632,2633,2634,2635,2636,2637,2638,2501(WN);

DIN2573,2576,2527,2655,2656(PL);DIN2566.

British standard of inconel 718 flanges in BS3293,BS4504,BS10

The Italy standard of inconel 718 flanges in UNI2276-67,UNI2277-67,UNI2278-67,UNI6083-67,UNI6084-67,,UNI6088-67,,UNI6089-67,UNI2299-67,,UNI2300-67,UNI2280-67,,UNI2281-67,,UNI2282-67,,UNI2283-67

Janpanese standard of inconel 718 flanges in JIS B2220,

Korean Standard of inconel 718 flanges in KSB 1503,KSB 6216,KSB 2332,KSB 2333,KSD 3578,KSD 4308.

Australian standard of inconel 718 flanges in AS 4087,AS 2129,AS/NZS 4331.1

ISO standsard of inconel 718 flanges in ISO 7005-1,ISO 9624

Russian standard of inconel 718 flanges in GOST 12820,GOST 12821,GOST 12836,GOST 12820-80,GOST 12821-80,GOST 12836-80.

European standard of inconel 718 flanges in EN1092-1

South african standard of inconel 718 flanges in SABS-1123/SANS-1123

As per surface treatment of inconel 718 flange, we could do Anti-rust Oil;Black /Yellow Paint;Hot-dipped Galvanization as per the requirement of the clients

The material grade of inconel 718 flanges is by forging as per the standard of ASTM B637.

We could do solution treatment, ageing treatment for inconel 718 flanges as per the requirement of the clients

Inconel 718 is a nickel-chromium alloy which can be heat-treated to give high strength, good corrosion resistance, ease of formability and which can be welded with good resistance to strain age cracking

The chemical composition of inconel 718 flanges is as follows

Table 1 - Limiting Chemical Compositiona, %

Ni (plus Co).......................................................50.00-55.00

Cr......................................................................17.00-21.00

Fe .....................................................................................Balance*

Nb (plus Ta)....................................................4.75-5.50

Mo.....................................................................2.80-3.30

Ti.............................................................................0.65-1.15

Al..........................................................................0.20-0.80

Co...............................................................................1.00max.

C..............................................................................0.08max.

Mn.......................................................................0.35max.

Si...............................................................................0.35max.

P.....................................................................0.015max.

S...............................................................................0.015max.

B..............................................................................0.006max.

Cu.............................................................................0.30max

The mechanical property of inconel 718 flanges is as follows

Ultimate Tensile Strength, psi

.2% Yield Strength psi

Elongation %

Hardness Rockwell B

1034Mpa (150KSI)

827Mpa (120KSI)

20

298-363 HB

In order to control the quanlity of inconel 718 flanges, our workshop has followsing inspection equipment:Impact testing machine ,Magnetic particle flaw detector ,Metallographic Microscope ,Portable Spectrometer ,Ultrasonic Flaw Detector ,Universal testing machine ,Hardness testing machine

We could supply material certificate of inconel 718 flanges  as per the standard of EN10204-3.1 or EN10204-3.2 of third party(like TUV,DNV,GL and so on)

Our inconel 718 flanges will be 100% Ultrasonic Inspection as per the forging parts UT Test standard of ASTM A 388 or EN10228.

Our inconel 718 flanges are widely used in many industries,such as Butterfly Valves,Globe Valves,compressed air stream,Agitated Neutsche Filter,Scrubber vessels.Accumulators,Shell and Tube Heat Exchangers,Storage tanks and Handling Equipments,Bulk Liquefied Petroleum Gas (LPG), Propane & Ammonia Storage and Handling Systems,Dry Dock & Ship Yard Maintenance and so on

As per packing of inconel 718 flanges, we will use  Veneer Case or Plywood Case

Please send us the drawing of inconel 718 flanges, we are glad to quote the best price for your side.

Except inconel 718 flanges,we also could produce inconel 718 bars,inconel 718 plates,inconel 718 fastener,inconel 718 bolts,inconel 718 pipe fittings,inconel 718 pipes,inconel 718 tubes,inconel 718 springs