Products

1.4886 Flanges
Home > Products > Flanges

We produce 1.4886 flanges,EN 1.4886 flanges,1.4886 Blind Flanges,1.4886 Welding Neck Flanges,1.4886 Slip On Flanges,1.4886 Socket Welding Flanges,1.4886 Lap joint Flanges,1.4886 Ring joint Flanges,1.4886 Slip-on flanges,1.4886 Weld Neck Flanges,1.4886 WN flanges,1.4886 LWN flanges, 1.4886 Long weld neck flanges,1.4886 orifice flanges,1.4886 Spectacle blind Flanges,EN 1.4886 Spectacle flanges, EN 1.4886 spacer ring flanges,1.4886 Swivel Ring Flanges,1.4886 WNRF Flanges,1.4886 SORF Flanges,1.4886 SWRF Flanges,1.4886 Threaded Flanges,1.4886 Ring Type Joint Flanges,1.4886 BLRF Flanges,1.4886 RTJ Flanges from china

The size of 1.4886 flanges that we could do is from 1/2” – 96”, DN15-DN2000

We could produce 1.4886 flanges with pressre from 150LB-2500LB or PN6-PN100

The face of 1.4886 flanges that we could do is in Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

Also we could produce 1.4886 flanges as per the drawing of the clients

Following is the standard of 1.4886 flanges that we could do:

American standard of 1.4886 flanges in ANSI B16.5 ;ASME B16.47 Series A(MSS SP-44);ASME B16.47 Series B(API 605);ANSI B16.1,AWWA C207

Germany standard of 1.4886 flanges in DIN 2630,2620,2632,2633,2634,2635,2636,2637,2638,2501(WN);

DIN2573,2576,2527,2655,2656(PL);DIN2566.

British standard of 1.4886 flanges in BS3293,BS4504,BS10

The Italy standard of EN 1.4886 flanges in UNI27676-67,UNI27677-67,UNI27678-67,UNI6083-67,UNI6084-67,,UNI6088-67,,UNI6089-67,UNI27699-67,,UNI2300-67,UNI27680-67,,UNI27681-67,,UNI27682-67,,UNI27683-67

Janpanese standard of 1.4886 flanges in JIS B27620,

Korean Standard of 1.4886 flanges in KSB 1503,KSB 6216,KSB 2332,KSB 2333,KSD 3578,KSD 4308.

Australian standard of 1.4886 flanges in AS 4087,AS 2129,AS/NZS 4320.1

ISO standsard of 1.4886 flanges in ISO 7005-1,ISO 9624

Russian standard of 1.4886 flanges in GOST 12820,GOST 12821,GOST 12836,GOST 12820-80,GOST 12821-80,GOST 12836-80.

European standard of EN 1.4886 flanges in EN1092-1

South african standard of 1.4886 flanges in SABS-1123/SANS-1123

As per surface treatment of EN 1.4886 flange, we could do Anti-rust Oil;Black /Yellow Paint;Hot-dipped Galvanization as per the requirement of the clients

The material grade of EN 1.4886 flanges is by forging as per the standard of ASTM B462.

We will do following testing to control the quality of 1.4886 Flanges:Chemical Analysis,Corrosion Test,Tensile, Hardness, Flattening, Flare, Flange and Reverse-bend tests,Eddy Current Testing,Hydrostatic Testing,Air under Press Test,IGC Test (Inter Granular Corrosion Test),Micro-Structure Analysis,Radiography Test,Ultrasonic Test,Liquid Penetrate Test

We could do solution treatment, ageing treatment for 1.4886 flanges as per the requirement of the clients

1.4886 provide good resistance to oxidation and carburization. Its oxidation resistance is enhanced by the silicon content.

The chemical composition of 1.4886 flanges is as follows

Limiting Chemical Composition, %

Ni..........................................................................34.0-37.0

Cr....................................................................17.0-20.0

Fe...............................................................................Balance*

C........................................................................0.08max.

Si.........................................................................0.75-1.50

Mn...................................................................2.0 max.

P..............................................................0.030 max.

Sr........................................................................0.030max.


The mechanical property of 1.4886 flanges is as follows

Properties

Metric

Tensile  strength(annealed)

600 MPa

Yield  strength(annealed)

280 MPa

Elongation  at Break

45%


We could supply material certificate of 1.4886 flanges  as per the standard of EN10204-3.1 or EN10204-3.2 of third party(like TUV,DNV,GL and so on)

Our 1.4886 flanges will be 100% Ultrasonic Inspection as per the forging parts UT Test standard of ASTM A 388 or EN102768.

Our 1.4886 flanges are widely used in many industries,such as high pressure pumps,Centrifugal pumps,power generators and nitrogen generators,Food Processing equipment and storage.Columns & Towers,Tanks ,Silos,Process Modules,Preheaters,Hydrogenators,Offshore and onshore industry, such as subsea and deepwater offshore oil production systems, industrial air compressors


Ask for our Delivery Guarantee for our EN 1.4886 flanges, and we will offer a cumulative rebate of 1% for the 1st week late, 2% for the 2nd week late, etc., to a maximum of 10%. For example, a 3 week late delivery will yield a rebate of 6%. We are so sure our long delivery will be on time, we back it up with a financial guarantee.

In order to export our 1.4886 Flanges, we will do Packing in  No Fumigate or Fumigate Plywood/Wood Pallet or Case as per the requirement of our clients

Please send us the drawing of 1.4886 flanges, we are glad to quote the best price for your side.

Except 1.4886 flanges,we also could produce 1.4886 bars,1.4886 plates,1.4886 fastener,1.4886 bolts,1.4886 fittings,1.4886 pipes,1.4886 tubes,1.4886 springs