Products

UNS N08800 Fasteners
Home > Products > Fastener

We produce UNS N08800 fasteners,UNS NO8800 fasteners,UNS N08800 studs,UNS N08800 Nuts,UNS N08800 Screws,UNS N08800 Washers,UNS N08800 Sockets,UNS N08800 pins,UNS N08800 turnbuckles,UNS N08800 socket screws,UNS N08800 HEAVY HEX NUT,UNS NO8800 HEX NUT,UNS NO8800 Rivets,UNS N08800 coupling nuts and UNS N08800 pins in china

The type of UNS N08800 nuts that we could do is as follows:UNS N08800 Hex Nuts,UNS N08800 Heavy Hex Nut,UNS NO8800 Cap Nut,Acorn Nut,Serrated Flange Nut,Coupling Nut,Square Nut,Castle Nut,Wing Nut,Flange Lock Nut,Flex Lock NutnK Lock Nut,Jam Nut,Slotted Nut,Way Lock Nut,Custom Nut,T Nuts

The type of UNS N08800 bolts that we could do is as follows:UNS NO8800 Hex Head Bolt,Carriage Bolt,Anchor Bolt,Eye Bolt,Flange Bolt,Elevator Bolt,Lag Bolt,Draw Bolt,Plow Bolt,Stove Bolt,Tap Bolt,Hanger Bolt,U Bolt,Grub Screw,Shoulder Bolt,Step Bolt,J Bolt

The type of UNS N08800 screws that we could do is as follows:UNS N08800 Socket Head Cap Screws,Flat Socket Cap Screws,Button Head Socket Screw, Low Head Cap Screws, Countersunk Socket Screws,Socket Cap screws,Socket Set screws and so on

The type of UNS N08800 studs that we could do is as follows: UNS N08800 Thread Studs,Collar Studs,Combo Studs,Double End Studs,Pad Studs,engineer studs,Tap End Studs

The type of UNS N08800 washers that we could do is as follows:UNS N08800 Flat Washer,Spring Washers,Dome Washer,Hexagonal Washer,Square Washer,Countersunk WasherTooth Lock Washer,Dock Washer,Fender Washer,Ogee Washer,Hex Washers,Split / Lock Washer,Customized Washer,Tab Washers

As per surface finish of UNS N08800 fasteners. we could do Cadmium Plating,Cadmium Yellow,Chrysler Specs,Zinc and Black Dichromate,Zinc and Yellow Dichromate,Zinc Plating as per the requirement of the clients

UNS N08800 was introduced to the market in the 1950s to fill the need for a heat- and corrosion-resistant alloy with a relatively low nickel content since nickel was, at the time, designated a “strategic” metal


The chemical composition of UNS NO8800 fasteners is as follows

Incoloy

UNS N08800

Element

Min

Max

Ni + Co

30.0

35.0

Co

---

2.00

Cr

19.0

23.0

Cu

---

0.75

Fe

Bal

Si

---

1.00

Mn

---

1.50

C

---

0.10

Al

0.15

0.60

Ti

0.15

0.60

S

---

0.015


The mechanical property of UNS N08800 fasteners is as follows

0.2% Yield strength
 (MPA)

Tensile strength
 (MPA)

Elongation
 (%)

Hardness

(HV)

(HB)

≥ 205

≥ 520

≥ 30


We have following manufacture process to produce UNS N08800 Fasteners:Cold Heading, Progressive Hot Heading, Hot Forging,Point/Shave/CNC Machining,Broaching, Lightening Hole Drilling,Cross-Hole Drilling,Grinding,Heat Treating,Fillet and Thread ROlling

As per heat treatment of UNS N08800 fasteners, we could do, solution and ageing treatment, Tempering, Hardening, Spheroidizing, Stress Relieving as per the requirement of the clients

In order to control the quality of UNS N08800 fasteners, we have following inspection equipment:size inspection equipment,Digital Vernier Callipers,Digital Micrometers,Slip Gauge Sets,Adjustable Dial Snap Gauges,Thread Ring Gauges,Thread Plug Gauges,Wear Check Plugs for Thread Gauges,Distance Gauges,Adjustable Dial Snap Gauges,Height Gauges,System 21 Ring Gauge,Rotational Capacity.

As per the packing of UNS N08800 fasteners,We will package specific quantities for you and include your part number on bag or box labels (bar coded, human readable, or both). Your part number will also appear on invoices, packing slips and other paperwork associated with this part.We have the technology to produce a variety of labels that incorporate graphics in color or black and white for every piece of UNS N08800 fasteners .

In order to supply superior UNS N08800 Fasteners,We will do Destructive Testing and Non Destructive Testing for our fasteners, Destructive Testing include Product Analysis,G48 Corrosion Test,Micrographic Examination,Ferrite and Phase Count,Charpy Impact Test,Tensile Test,HIC Testing,SSE Testing.Non Destructive Testing include Dye Penetrant Testing,Ultrasonic Testing,Hardness Check,Ferrite check,PMI

Our UNS N08800 fasteners are widely used in Aerospace .Computer industries .Automotive industries .Electric and electronic industries ,Medical, hydraulic and pneumatic industries ,High-end hardware product industries and so on

Also we could supply UNS N08800 fasteners quality inspection certificate In En10204-3.2 by third party,like TUV, GL, LR, ABS, DNV, RINA, BV and so on

Please send us the size or drawing of UNS N08800 fasteners that you need, we are glad to quote the best price

Except UNS N08800 fasteners,we also could produce UNS N08800 flanges,UNS N08800 plates,UNS N08800 bars,UNS N08800 bolts,UNS N08800 fittings,UNS N08800 pipes,UNS N08800 tubes,UNS N08800 springs