Products

UNS N08330 Fasteners
Home > Products > Fastener

We produce UNS N08330 fasteners,UNS NO8330 fasteners,UNS N08330 studs,UNS N08330 Nuts,UNS N08330 Screws,UNS N08330 Washers,UNS N08330 Sockets,UNS N08330 pins,UNS N08330 turnbuckles,UNS N08330 socket screws,UNS N08330 HEAVY HEX NUT,UNS NO8330 HEX NUT,UNS NO8330 Rivets,UNS N08330 coupling nuts and UNS N08330 pins in china

The type of UNS N08330 nuts that we could do is as follows:UNS N08330 Hex Nuts,UNS N08330 Heavy Hex Nut,UNS NO8330 Cap Nut,Acorn Nut,Serrated Flange Nut,Coupling Nut,Square Nut,Castle Nut,Wing Nut,Flange Lock Nut,Flex Lock NutnK Lock Nut,Jam Nut,Slotted Nut,Way Lock Nut,Custom Nut,T Nuts

The type of UNS N08330 bolts that we could do is as follows:UNS NO8330 Hex Head Bolt,Carriage Bolt,Anchor Bolt,Eye Bolt,Flange Bolt,Elevator Bolt,Lag Bolt,Draw Bolt,Plow Bolt,Stove Bolt,Tap Bolt,Hanger Bolt,U Bolt,Grub Screw,Shoulder Bolt,Step Bolt,J Bolt

The type of UNS N08330 screws that we could do is as follows:UNS N08330 Socket Head Cap Screws,Flat Socket Cap Screws,Button Head Socket Screw, Low Head Cap Screws, Countersunk Socket Screws,Socket Cap screws,Socket Set screws and so on

The type of UNS N08330 studs that we could do is as follows: UNS N08330 Thread Studs,Collar Studs,Combo Studs,Double End Studs,Pad Studs,engineer studs,Tap End Studs

The type of UNS N08330 washers that we could do is as follows:UNS N08330 Flat Washer,Spring Washers,Dome Washer,Hexagonal Washer,Square Washer,Countersunk WasherTooth Lock Washer,Dock Washer,Fender Washer,Ogee Washer,Hex Washers,Split / Lock Washer,Customized Washer,Tab Washers

As per surface finish of UNS N08330 fasteners. we could do Cadmium Plating,Cadmium Yellow,Chrysler Specs,Zinc and Black Dichromate,Zinc and Yellow Dichromate,Zinc Plating as per the requirement of the clients

UNS N08330 has a solid solution composition and is not hardenable by heat treatment.


The chemical composition of UNS NO8330 fasteners is as follows

Chemical Composition, %

Cr

Ni

Mn

Si

P

S

C

Fe

17.0-20.0

34.0-37.0

2.0 Max

0.75-1.50

0.03 Max

0.03 Max

0.08 Max

Balance


The mechanical property of UNS N08330 fasteners is as follows

Mechanical Properties
Room Temperature


Form  and Condition

Ultimate Tensile Strength, MPA

.2% Yield Strength, MPA

Elongation %

Incoloy 330

548-616

240-308

38-45


We have following manufacture process to produce UNS N08330 Fasteners:Cold Heading, Progressive Hot Heading, Hot Forging,Point/Shave/CNC Machining,Broaching, Lightening Hole Drilling,Cross-Hole Drilling,Grinding,Heat Treating,Fillet and Thread ROlling

As per heat treatment of UNS N08330 fasteners, we could do, solution and ageing treatment, Tempering, Hardening, Spheroidizing, Stress Relieving as per the requirement of the clients

In order to control the quality of UNS N08330 fasteners, we have following inspection equipment:size inspection equipment,Digital Vernier Callipers,Digital Micrometers,Slip Gauge Sets,Adjustable Dial Snap Gauges,Thread Ring Gauges,Thread Plug Gauges,Wear Check Plugs for Thread Gauges,Distance Gauges,Adjustable Dial Snap Gauges,Height Gauges,System 21 Ring Gauge,Rotational Capacity.

As per the packing of UNS N08330 fasteners,We will package specific quantities for you and include your part number on bag or box labels (bar coded, human readable, or both). Your part number will also appear on invoices, packing slips and other paperwork associated with this part.We have the technology to produce a variety of labels that incorporate graphics in color or black and white for every piece of UNS N08330 fasteners .

In order to supply superior UNS N08330 Fasteners,We will do Destructive Testing and Non Destructive Testing for our fasteners, Destructive Testing include Product Analysis,G48 Corrosion Test,Micrographic Examination,Ferrite and Phase Count,Charpy Impact Test,Tensile Test,HIC Testing,SSE Testing.Non Destructive Testing include Dye Penetrant Testing,Ultrasonic Testing,Hardness Check,Ferrite check,PMI

Our UNS N08330 fasteners are widely used in Petrochemical,Capital equipment,Energy,Shipping & Offshore industry,Mining industry,Cement industry,Paper industry,Metalworking industry and so on

Also we could supply UNS N08330 fasteners quality inspection certificate In En10204-3.2 by third party,like TUV, GL, LR, ABS, DNV, RINA, BV and so on

Please send us the size or drawing of UNS N08330 fasteners that you need, we are glad to quote the best price

Except UNS N08330 fasteners,we also could produce UNS N08330 flanges,UNS N08330 plates,UNS N08330 bars,UNS N08330 bolts,UNS N08330 fittings,UNS N08330 pipes,UNS N08330 tubes,UNS N08330 springs