Products

Nitronic 50 Fasteners
Home > Products > Fastener

We produce Nitronic 50 fasteners,Nitronic50 fasteners,Nitronic 50 studs,Nitronic 50 Nuts,Nitronic 50 Screws,Nitronic 50 bolts,Nitronic 50 Washers,Nitronic 50 Sockets,Nitronic 50 pins,Nitronic 50 turnbuckles,Nitronic 50 socket screws,Nitronic 50 HEAVY HEX NUT,Nitronic50 HEX NUT,Nitronic50 Rivets,Nitronic 50 coupling nuts and Nitronic 50 pins in china
The type of Nitronic 50 nuts that we could do is as follows:Nitronic 50 Hex Nuts,Nitronic 50 Heavy Hex Nut,Nitronic50 Cap Nut,Acorn Nut,Serrated Flange Nut,Coupling Nut,Square Nut,Castle Nut,Wing Nut,Flange Lock Nut,Flex Lock NutnK Lock Nut,Jam Nut,Slotted Nut,Way Lock Nut,Custom Nut,T Nuts  
The type of Nitronic 50 bolts that we could do is as follows:Nitronic50 Hex Head Bolt,Carriage Bolt,Anchor Bolt,Eye Bolt,Flange Bolt,Elevator Bolt,Lag Bolt,Draw Bolt,Plow Bolt,Stove Bolt,Tap Bolt,Hanger Bolt,U Bolt,Grub Screw,Shoulder Bolt,Step Bolt,J Bolt
The type of Nitronic 50 screws that we could do is as follows:Nitronic 50 Socket Head Cap Screws,Flat Socket Cap Screws,Button Head Socket Screw, Low Head Cap Screws, Countersunk Socket Screws,Socket Cap screws,Socket Set screws and so on
The type of Nitronic 50 studs that we could do is as follows: Nitronic 50 Thread Studs,Collar Studs,Combo Studs,Double End Studs,Pad Studs,engineer studs,Tap End Studs
The type of Nitronic 50 washers that we could do is as follows:Nitronic 50 Flat Washer,Spring Washers,Dome Washer,Hexagonal Washer,Square Washer,Countersunk WasherTooth Lock Washer,Dock Washer,Fender Washer,Ogee Washer,Hex Washers,Split / Lock Washer,Customized Washer,Tab Washers
As per surface finish of Nitronic 50 fasteners. we could do Cadmium Plating,Cadmium Yellow,Chrysler Specs,Zinc and Black Dichromate,Zinc and Yellow Dichromate,Zinc Plating as per the requirement of the clients
Nitronic 50 is a high strength and good corrosion resistant austenitic stainless steel.

The chemical composition of Nitronic50 fasteners is as follows

Chemistry Analysis

Carbon

0.06%

Manganese

4.00%-6.00%

Phosphorus

0.040%

Sulfur

0.030%

Silicon

1.00%

Chromium

20.50 - 23.50%

Nickel

11.50-13.50%

Molybdenum

1.50-3.00%

Nitrogen

0.20-0.30%

Columbium/Niobium

0.10-0.30%

Iron

51.87-60.97%

Vanadium

0.10-0.30%


The mechanical property of Nitronic 50 fasteners is as follows

Mechanical Property Requirements

Ultimate Tensile

Yield Strength (0.2% OS)

Elong.

R/A

Hardness

Min

690 MPa

380 MPa

35%

55%

Max

293


As per heat treatment of Nitronic 50 fasteners, we could do, solution and ageing treatment, Tempering, Hardening, Spheroidizing, Stress Relieving as per the requirement of the clients
In order to control the quality of Nitronic 50 fasteners, we have following inspection equipment:size inspection equipment,Digital Vernier Callipers,Digital Micrometers,Slip Gauge Sets,Adjustable Dial Snap Gauges,Thread Ring Gauges,Thread Plug Gauges,Wear Check Plugs for Thread Gauges,Distance Gauges,Adjustable Dial Snap Gauges,Height Gauges,System 21 Ring Gauge,Rotational Capacity
As per the packing of Nitronic 50 fasteners, In addition to the standard cartons, we also provides small box packing, color-printed carton, polybag packing, custom label with barcode etc.
In order to control the quality of Nitronic 50 fasteners materail, we could do following test as per the requirement of the clients:tensile tests,impact test,hardness test (Brinell, Vickers, Rockwell),magnetic partlice examination,penetrants test (surface for fissures),ultrasonic examination,
Our Nitronic 50 fasteners are widely used in ANCILLARY INDUSTRIES,Alternative Fuel Systems,Research & Design Projects,Geothermal Power Plants,Wind Farm Maintenance ,Solar (Photovoltaics) Power Equipment ,Hydro-Electric Power Plant,Coal-fueled, Oil-fueled or Nuclear Power Plant Maintenance ,Natural Gas Storage & Plant Maintenance Boiler Systems ,Turbine Manufacturers ,Transmission, Distribution & Storage Equipment Manufacturers,Motors & Generators and so on

Also we could supply Nitronic 50 fasteners quality inspection certificate by third party,like TUV, GL, LR, ABS, DNV, RINA, BV and so on
Please send us the size or drawing of Nitronic 50 fasteners that you need, we are glad to quote the best price
Except Nitronic 50 fasteners,we also could produce Nitronic 50 flanges,Nitronic 50 plates,Nitronic 50 bars,Nitronic 50 bolts,Nitronic 50 pipe fittings,Nitronic 50 pipes,Nitronic 50 tubes,Nitronic 50 springs