Products

Inconel X-750 Fasteners
Home > Products > Fastener

We produce Inconel X-750 fasteners,Inconel X750 fasteners,Inconel X-750 studs,Inconel X-750 Nuts,Inconel X-750 Screws,Inconel X-750 bolts,Inconel X-750 Washers,Inconel X-750 Sockets,Inconel X-750 pins,Inconel X-750 turnbuckles,Inconel X-750 socket screws,Inconel X-750 HEAVY HEX NUT,Inconel X-750 HEX NUT,Inconel X-750 Rivets,Inconel X-750 coupling nuts and Inconel X-750 pins in china

The type of Inconel X-750 nuts that we could do is as follows:Inconel X-750 Hex Nuts,Inconel X-750 Heavy Hex Nut,Inconel X750 Cap Nut,Acorn Nut,Serrated Flange Nut,Coupling Nut,Square Nut,Castle Nut,Wing Nut,Flange Lock Nut,Flex Lock NutnK Lock Nut,Jam Nut,Slotted Nut,Way Lock Nut,Custom Nut,T Nuts

The type of Inconel X-750 bolts that we could do is as follows:Inconel X750 Hex Head Bolt,Carriage Bolt,Anchor Bolt,Eye Bolt,Flange Bolt,Elevator Bolt,Lag Bolt,Draw Bolt,Plow Bolt,Stove Bolt,Tap Bolt,Hanger Bolt,U Bolt,Grub Screw,Shoulder Bolt,Step Bolt,J Bolt

The type of Inconel X-750 screws that we could do is as follows:Inconel X-750 Socket Head Cap Screws,Flat Socket Cap Screws,Button Head Socket Screw, Low Head Cap Screws, Countersunk Socket Screws,Socket Cap screws,Socket Set screws and so on

The type of Inconel X-750 studs that we could do is as follows: Inconel X-750 Thread Studs,Collar Studs,Combo Studs,Double End Studs,Pad Studs,engineer studs,Tap End Studs

The type of Inconel X-750 washers that we could do is as follows:Inconel X-750 Flat Washer,Spring Washers,Dome Washer,Hexagonal Washer,Square Washer,Countersunk WasherTooth Lock Washer,Dock Washer,Fender Washer,Ogee Washer,Hex Washers,Split / Lock Washer,Customized Washer,Tab Washers

As per surface finish of Inconel X-750 fasteners. we could do Cadmium Plating,Cadmium Yellow,Chrysler Specs,Zinc and Black Dichromate,Zinc and Yellow Dichromate,Zinc Plating as per the requirement of the clients

Inconel X-750 is a precipitation-hardenable nickel-chromium alloy used for its corrosion and oxidation resistance and high strength at temperatures to 1300°F.

The chemical composition of Inconel X750 fasteners is as follows

Chemical Analysis

C

.08 max

MN

1.00 max

P

S

.01 max

Si

.50 max

Cr

14.0 - 17.0

Ni

70.0 min

Mo

Cu

0.50 max

Co

1.00 max

Cb+Ta

Ti

2.25 - 2.75

Al

0.40 - 1.0

Fe

5.0 - 9.0

Nb

0.70 - 1.20

The mechanical property of Inconel X-750 fasteners is as follows:

minimum properties:

Tensilestrength.................................155 ksi

Yield strength (0.2%offset)..............100 ksi

Elongation in 2 in.

Strip specimen.....................15%

Full tube specimen..............20%

Rupture life (1350°F/45 ksi).............23hr

As per heat treatment of Inconel X-750 fasteners, we could do, solution and ageing treatment, Tempering, Hardening, Spheroidizing, Stress Relieving as per the requirement of the clients

In order to control the quality of Inconel X-750 fasteners, we have following inspection equipment:size inspection equipment,Digital Vernier Callipers,Digital Micrometers,Slip Gauge Sets,Adjustable Dial Snap Gauges,Thread Ring Gauges,Thread Plug Gauges,Wear Check Plugs for Thread Gauges,Distance Gauges,Adjustable Dial Snap Gauges,Height Gauges,System 21 Ring Gauge,Rotational Capacity

As per the packing of Inconel X-750 fasteners, In addition to the standard cartons, we also provides small box packing, color-printed carton, polybag packing, custom label with barcode etc.

In order to control the quality of Inconel X-750 fasteners materail, we could do following test as per the requirement of the clients:tensile tests,impact test,hardness test (Brinell, Vickers, Rockwell),magnetic partlice examination,penetrants test (surface for fissures),ultrasonic examination,

Our Inconel X-750 fasteners are widely used in Quarry & Opencast Mine Maintenance ,Mining & Excavation Plant Equipment ,Deep Mining Pit Maintenance & Repair ,Conveyor Equipment Manufacturers .Mine Construction & Site Extension Construction Impact, Jaw & Cone Crusher Manufacturers,Drilling, Scalping & Screener Equipment Manufacturers and so on

Also we could supply Inconel X-750 fasteners quality inspection certificate by third party,like TUV, GL, LR, ABS, DNV, RINA, BV and so on

Please send us the size or drawing of Inconel X-750 fasteners that you need, we are glad to quote the best price

Except Inconel X-750 fasteners,we also could produce Inconel X-750 flanges,Inconel X-750 plates,Inconel X-750 bars,Inconel X-750 bolts,Inconel X-750 pipe fittings,Inconel X-750 pipes,Inconel X-750 tubes,Inconel X-750 springs