We produce Inconel Alloy 718SPF fasteners,Inconel 718SPF fasteners,Inconel Alloy 718SPF studs,Inconel Alloy 718SPF Nuts,Inconel Alloy 718SPF Screws,Inconel Alloy 718SPF Washers,Inconel Alloy 718SPF Sockets,Inconel Alloy 718SPF pins,Inconel Alloy 718SPF turnbuckles,Inconel Alloy 718SPF socket screws,Inconel Alloy 718SPF HEAVY HEX NUT,Inconel 718SPF HEX NUT,Inconel 718SPF Rivets,Inconel Alloy 718SPF coupling nuts and Inconel Alloy 718SPF pins in china
The type of Inconel Alloy 718SPF nuts that we could do is as follows:Inconel Alloy 718SPF Hex Nuts,Inconel Alloy 718SPF Heavy Hex Nut,Inconel 718SPF Cap Nut,Acorn Nut,Serrated Flange Nut,Coupling Nut,Square Nut,Castle Nut,Wing Nut,Flange Lock Nut,Flex Lock NutnK Lock Nut,Jam Nut,Slotted Nut,Way Lock Nut,Custom Nut,T Nuts
The type of Inconel Alloy 718SPF bolts that we could do is as follows:Inconel 718SPF Hex Head Bolt,Carriage Bolt,Anchor Bolt,Eye Bolt,Flange Bolt,Elevator Bolt,Lag Bolt,Draw Bolt,Plow Bolt,Stove Bolt,Tap Bolt,Hanger Bolt,U Bolt,Grub Screw,Shoulder Bolt,Step Bolt,J Bolt
The type of Inconel Alloy 718SPF screws that we could do is as follows:Inconel Alloy 718SPF Socket Head Cap Screws,Flat Socket Cap Screws,Button Head Socket Screw, Low Head Cap Screws, Countersunk Socket Screws,Socket Cap screws,Socket Set screws and so on
The type of Inconel Alloy 718SPF studs that we could do is as follows: Inconel Alloy 718SPF Thread Studs,Collar Studs,Combo Studs,Double End Studs,Pad Studs,engineer studs,Tap End Studs
The type of Inconel Alloy 718SPF washers that we could do is as follows:Inconel Alloy 718SPF Flat Washer,Spring Washers,Dome Washer,Hexagonal Washer,Square Washer,Countersunk WasherTooth Lock Washer,Dock Washer,Fender Washer,Ogee Washer,Hex Washers,Split / Lock Washer,Customized Washer,Tab Washers
As per surface finish of Inconel Alloy 718SPF fasteners. we could do Cadmium Plating,Cadmium Yellow,Chrysler Specs,Zinc and Black Dichromate,Zinc and Yellow Dichromate,Zinc Plating as per the requirement of the clients
Inconel Alloy 718SPF is an age-hardenable austenitic material
The chemical composition of Inconel 718SPF fasteners is as follows
Nickel (+Cobalt)....................................................................50.00-55.00
Chrominium.............................................................................17.00-21.00
Niobium (+Tatabium)........................................................................4.75-5.25
Molybdenum................................................................................2.80-3.30
Titabium...................................................................................0.65-1.15
Aluminium................................................................................0.20-0.80
Cobalt................................................................................1.00max.
Carbon..................................................................................0.05max.
Manganese...............................................................................0.35 max.
Silcon..................................................................................0.35max.
Phosphorous................................................................................0.015max.
Sulfur.................................................................................0.002max.
Boron.................................................................................0.006max.
Copper.................................................................................0.30max.
Nitrogen...................................................................................0.01max.
Iron...................................................................................Balance†
The mechanical property of Inconel Alloy 718SPF fasteners is as follows
Tensile Properties (At Room Temp)
Property | Value |
Tensile Strength | 161530 PSI |
Yield Strength at 0.2% Offset | 118175 PSI |
Elongation in 4D | 33% |
We have following manufacture process to produce Inconel Alloy 718SPF Fasteners:Cold Heading, Progressive Hot Heading, Hot Forging,Point/Shave/CNC Machining,Broaching, Lightening Hole Drilling,Cross-Hole Drilling,Grinding,Heat Treating,Fillet and Thread ROlling
As per heat treatment of Inconel Alloy 718SPF fasteners, we could do, solution and ageing treatment, Tempering, Hardening, Spheroidizing, Stress Relieving as per the requirement of the clients
In order to control the quality of Inconel Alloy 718SPF fasteners, we have following inspection equipment:size inspection equipment,Digital Vernier Callipers,Digital Micrometers,Slip Gauge Sets,Adjustable Dial Snap Gauges,Thread Ring Gauges,Thread Plug Gauges,Wear Check Plugs for Thread Gauges,Distance Gauges,Adjustable Dial Snap Gauges,Height Gauges,System 21 Ring Gauge,Rotational Capacity.
As per the packing of Inconel Alloy 718SPF fasteners,We will package specific quantities for you and include your part number on bag or box labels (bar coded, human readable, or both). Your part number will also appear on invoices, packing slips and other paperwork associated with this part.We have the technology to produce a variety of labels that incorporate graphics in color or black and white for every piece of Inconel Alloy 718SPF fasteners .
In order to supply superior Inconel Alloy 718SPF Fasteners,We will do Destructive Testing and Non Destructive Testing for our fasteners, Destructive Testing include Product Analysis,G48 Corrosion Test,Micrographic Examination,Ferrite and Phase Count,Charpy Impact Test,Tensile Test,HIC Testing,SSE Testing.Non Destructive Testing include Dye Penetrant Testing,Ultrasonic Testing,Hardness Check,Ferrite check,PMI
Our Inconel Alloy 718SPF fasteners are widely used in Marine engineering,Chemical and hydrocarbon processing equipment,Gasoline and freshwater tanks,Crude petroleum stills,De-aerating heaters,Boiler feed water heaters and other heat exchangers,Valves, pumps,Industrial heat exchangers,Chlorinated solvents,Crude oil distillation towers
Also we could supply Inconel Alloy 718SPF fasteners quality inspection certificate In En10204-3.2 by third party,like TUV, GL, LR, ABS, DNV, RINA, BV and so on
Please send us the size or drawing of Inconel Alloy 718SPF fasteners that you need, we are glad to quote the best price
Except Inconel Alloy 718SPF fasteners,we also could produce Inconel Alloy 718SPF flanges,Inconel Alloy 718SPF plates,Inconel Alloy 718SPF bars,Inconel Alloy 718SPF bolts,Inconel Alloy 718SPF fittings,Inconel Alloy 718SPF pipes,Inconel Alloy 718SPF tubes,Inconel Alloy 718SPF springs
-
New
·1.4886 Fasteners ·1.4529 Fasteners ·1.4876 Fasteners ·2.4856 Fasteners ·2.4851 Fasteners ·2.4816 Fasteners ·2.4668 Fasteners ·2.4663 Fasteners ·2.4642 Fasteners ·2.4606 Fasteners -
Any
-
Hot