Products

Inconel 725 Fasteners
Home > Products > Fastener

We produce inconel 725 fasteners,inconel725 fasteners,inconel 725 studs,Inconel 725 Nuts,Inconel 725 Screws,Inconel 725 bolts,inconel 725 Washers,Inconel 725 Sockets,inconel 725 pins,inconel 725 turnbuckles,inconel 725 socket screws,inconel 725 HEAVY HEX NUT,inconel 725 HEX NUT,inconel 725 Rivets,inconel 725 coupling nuts and inconel 725 pins in china

The type of inconel 725 nuts that we could do is as follows:inconel 725 Hex Nuts,inconel 725 Heavy Hex Nut,inconel 725 Cap Nut,Acorn Nut,Serrated Flange Nut,Coupling Nut,Square Nut,Castle Nut,Wing Nut,Flange Lock Nut,Flex Lock NutnK Lock Nut,Jam Nut,Slotted Nut,Way Lock Nut,Custom Nut,T Nuts

The type of inconel 725 bolts that we could do is as follows:inconel 725 Hex Head Bolt,Carriage Bolt,Anchor Bolt,Eye Bolt,Flange Bolt,Elevator Bolt,Lag Bolt,Draw Bolt,Plow Bolt,Stove Bolt,Tap Bolt,Hanger Bolt,U Bolt,Grub Screw,Shoulder Bolt,Step Bolt,J Bolt

The type of inconel 725 screws that we could do is as follows:inconel 725 Socket Head Cap Screws,Flat Socket Cap Screws,Button Head Socket Screw, Low Head Cap Screws, Countersunk Socket Screws,Socket Cap screws,Socket Set screws and so on

The type of inconel 725 studs that we could do is as follows: inconel 725 Thread Studs,Collar Studs,Combo Studs,Double End Studs,Pad Studs,engineer studs,Tap End Studs

The type of inconel 725 washers that we could do is as follows:inconel 725 Flat Washer,Spring Washers,Dome Washer,Hexagonal Washer,Square Washer,Countersunk WasherTooth Lock Washer,Dock Washer,Fender Washer,Ogee Washer,Hex Washers,Split / Lock Washer,Customized Washer,Tab Washers

As per surface finish of inconel 725 fasteners. we could do Cadmium Plating,Cadmium Yellow,Chrysler Specs,Zinc and Black Dichromate,Zinc and Yellow Dichromate,Zinc Plating as per the requirement of the clients

Inconel 725 are useful for a range of applications that require outstanding corrosion resistance along with high strength

The chemical composition of inconel 725 fasteners is as follows

Cr

C

Si

Mn

Fe

Ti

Al

Ni

P

S

Mo

Min %

19.00

-

-

-

Bal.

1.00

55.00

-

-

7.00

Max %

22.50

0.03

0.20

0.35

-

1.70

0.35

59.00

0.015

0.010

9.50

Other Elements

Nb 2.75-4.00

The mechanical property of inconel 725 fasteners

Condition: Solutionannealed followed by age hardening

Property

Typical Values

Ultimate Tensile  Strength

140 min Ksi (965 Mpa)

0.2 % Yield Strength

120 min Ksi (827 Mpa)

Elongation

20 % min

Reduction of Area

35 % min

Charpy Impact Toughness

40J mean at 20o C

Hardness

43 HRc max

As per heat treatment of inconel 725 fasteners, we could do, solution and ageing treatment, Tempering, Hardening, Spheroidizing, Stress Relieving as per the requirement of the clients

In order to control the quality of inconel 725 fasteners, we have following inspection equipment:size inspection equipment,Digital Vernier Callipers,Digital Micrometers,Slip Gauge Sets,Adjustable Dial Snap Gauges,Thread Ring Gauges,Thread Plug Gauges,Wear Check Plugs for Thread Gauges,Distance Gauges,Adjustable Dial Snap Gauges,Height Gauges,System 21 Ring Gauge,Rotational Capacity

As per the packing of inconel 725 fasteners, In addition to the standard cartons, we also provides small box packing, color-printed carton, polybag packing, custom label with barcode etc.

In order to control the quality of inconel 725 fasteners materail, we could do following test as per the requirement of the clients:tensile tests,impact test,hardness test (Brinell, Vickers, Rockwell),magnetic partlice examination,penetrants test (surface for fissures),ultrasonic examination,

Our inconel 725 fasteners are widely used in high pressure pumps,Centrifugal pumps,power generators and nitrogen generators,Food Processing equipment and storage.Columns & Towers,Tanks ,Silos,Process Modules,Preheaters,Hydrogenators,Offshore and onshore industry, such as subsea and deepwater offshore oil production systems, industrial air compressors and so on

Also we could supply inconel 725 fasteners quality inspection certificate by third party,like TUV, GL, LR, ABS, DNV, RINA, BV and so on

Please send us the size or drawing of inconel 725 fasteners that you need, we are glad to quote the best price

Except inconel 725 fasteners,we also could produce inconel 725 flanges,inconel 725 plates,inconel 725 bars,inconel 725 bolts,inconel 725 pipe fittings,inconel 725 pipes,inconel 725 tubes,inconel 725 springs