Inconel 718 Fasteners
Home > Products > Fastener

We produce inconel 718 fasteners,inconel718 fasteners,inconel 718 studs,Inconel 718 Nuts,Inconel 718 Screws,Inconel 718 bolts,inconel 718 Washers,Inconel 718 Sockets,inconel 718 pins,inconel 718 turnbuckles,inconel 718 socket screws,inconel 718 HEAVY HEX NUT,inconel 718 HEX NUT,inconel 718 Rivets,inconel 718 coupling nuts and inconel 718 pins in china

The type of inconel 718 nuts that we could do is as follows:inconel 718 Hex Nuts,inconel 718 Heavy Hex Nut,inconel 718 Cap Nut,Acorn Nut,Serrated Flange Nut,Coupling Nut,Square Nut,Castle Nut,Wing Nut,Flange Lock Nut,Flex Lock NutnK Lock Nut,Jam Nut,Slotted Nut,Way Lock Nut,Custom Nut,T Nuts

The type of inconel 718 bolts that we could do is as follows:inconel 718 Hex Head Bolt,Carriage Bolt,Anchor Bolt,Eye Bolt,Flange Bolt,Elevator Bolt,Lag Bolt,Draw Bolt,Plow Bolt,Stove Bolt,Tap Bolt,Hanger Bolt,U Bolt,Grub Screw,Shoulder Bolt,Step Bolt,J Bolt

The type of inconel 718 screws that we could do is as follows:inconel 718 Socket Head Cap Screws,Flat Socket Cap Screws,Button Head Socket Screw, Low Head Cap Screws, Countersunk Socket Screws,Socket Cap screws,Socket Set screws and so on

The type of inconel 718 studs that we could do is as follows: inconel 718 Thread Studs,Collar Studs,Combo Studs,Double End Studs,Pad Studs,engineer studs,Tap End Studs

The type of inconel 718 washers that we could do is as follows:inconel 718 Flat Washer,Spring Washers,Dome Washer,Hexagonal Washer,Square Washer,Countersunk WasherTooth Lock Washer,Dock Washer,Fender Washer,Ogee Washer,Hex Washers,Split / Lock Washer,Customized Washer,Tab Washers

As per surface finish of inconel 718 fasteners. we could do Cadmium Plating,Cadmium Yellow,Chrysler Specs,Zinc and Black Dichromate,Zinc and Yellow Dichromate,Zinc Plating as per the requirement of the clients

Inconel 718 is  nickel-chromium-molybdenum alloy designed to resist a wide range of severely corrosive environments, pitting and crevice corrosion.

The chemical composition of inconel 718 fasteners is as follows

Carbon (C) = max 0.08% Boron (B) = max0.006% Tantalum (Ta) = max 0.05%

Silicon (Si) = max 0.35% Manganese (Mn) =max 0.35% Copper (Cu) = max 0.30%

Sulfur (S) = max 0.015% Phosphorus (P) =max 0.015% Titanium (Ti) = 0.65-1.15%

Nickel (Ni) = 50.00-55.00% Chromium (Cr) =17.00-21.00% Iron (Fe) = remainder

Niobium (Nb) = 4.75-5.50% Molybdenum (Mo) =2.80-3.30%

Aluminum (Al) = 0.20-0.80% Cobalt (Co) =max 1.00%

The mechanical property of inconel 718 fasteners



Tensile Rm


ksi (min)

Tensile Rm


MPa (min)

R.p. 0.2% Yield


ksi (min)

R.p. 0.2% Yield


MPa (min)

Elongation (2” or 4D gl)


% (min)

As per heat treatment of inconel 718 fasteners, we could do, solution and ageing treatment, Tempering, Hardening, Spheroidizing, Stress Relieving as per the requirement of the clients

In order to control the quality of inconel 718 fasteners, we have following inspection equipment:size inspection equipment,Digital Vernier Callipers,Digital Micrometers,Slip Gauge Sets,Adjustable Dial Snap Gauges,Thread Ring Gauges,Thread Plug Gauges,Wear Check Plugs for Thread Gauges,Distance Gauges,Adjustable Dial Snap Gauges,Height Gauges,System 21 Ring Gauge,Rotational Capacity

As per the packing of inconel 718 fasteners, In addition to the standard cartons, we also provides small box packing, color-printed carton, polybag packing, custom label with barcode etc.

In order to control the quality of inconel 718 fasteners materail, we could do following test as per the requirement of the clients:tensile tests,impact test,hardness test (Brinell, Vickers, Rockwell),magnetic partlice examination,penetrants test (surface for fissures),ultrasonic examination,

Our inconel 718 fasteners are widely used in Ball Valves,Check Valves,Air filter,Oil filter,Heat Exchangers, Pressure Vessels,Rotary screw compressors,Cyclone Separators, Water tube boilers,In-line pumps,Magnetic pumps,Batch Steam Sterilizer,Naval Construction and so on

Also we could supply inconel 718 fasteners quality inspection certificate by third party,like TUV, GL, LR, ABS, DNV, RINA, BV and so on

Please send us the size or drawing of inconel 718 fasteners that you need, we are glad to quote the best price

Except inconel 718 fasteners,we also could produce inconel 718 flanges,inconel 718 plates,inconel 718 bars,inconel 718 bolts,inconel 718 pipe fittings,inconel 718 pipes,inconel 718 tubes,inconel 718 springs