Products

Incoloy 825 Fasteners
Home > Products > Fastener

We produce Incoloy 825 fasteners,Incoloy825 fasteners,Incoloy 825 studs,Incoloy 825 Nuts,Incoloy 825 Screws,Incoloy 825 bolts,Incoloy 825 Washers,Incoloy 825 Sockets,Incoloy 825 pins,Incoloy 825 turnbuckles,Incoloy 825 socket screws,Incoloy 825 HEAVY HEX NUT,Incoloy 825 HEX NUT,Incoloy 825 Rivets,Incoloy 825 coupling nuts and Incoloy 825 pins in china

The type of Incoloy 825 nuts that we could do is as follows:Incoloy 825 Hex Nuts,Incoloy 825 Heavy Hex Nut,Incoloy 825 Cap Nut,Acorn Nut,Serrated Flange Nut,Coupling Nut,Square Nut,Castle Nut,Wing Nut,Flange Lock Nut,Flex Lock NutnK Lock Nut,Jam Nut,Slotted Nut,Way Lock Nut,Custom Nut,T Nuts

The type of Incoloy 825 bolts that we could do is as follows:Incoloy 825 Hex Head Bolt,Carriage Bolt,Anchor Bolt,Eye Bolt,Flange Bolt,Elevator Bolt,Lag Bolt,Draw Bolt,Plow Bolt,Stove Bolt,Tap Bolt,Hanger Bolt,U Bolt,Grub Screw,Shoulder Bolt,Step Bolt,J Bolt

The type of Incoloy 825 screws that we could do is as follows:Incoloy 825 Socket Head Cap Screws,Flat Socket Cap Screws,Button Head Socket Screw, Low Head Cap Screws, Countersunk Socket Screws,Socket Cap screws,Socket Set screws and so on

The type of Incoloy 825 studs that we could do is as follows: Incoloy 825 Thread Studs,Collar Studs,Combo Studs,Double End Studs,Pad Studs,engineer studs,Tap End Studs

The type of Incoloy 825 washers that we could do is as follows:Incoloy 825 Flat Washer,Spring Washers,Dome Washer,Hexagonal Washer,Square Washer,Countersunk WasherTooth Lock Washer,Dock Washer,Fender Washer,Ogee Washer,Hex Washers,Split / Lock Washer,Customized Washer,Tab Washers

As per surface finish of Incoloy 825 fasteners. we could do Cadmium Plating,Cadmium Yellow,Chrysler Specs,Zinc and Black Dichromate,Zinc and Yellow Dichromate,Zinc Plating as per the requirement of the clients

Incoloy 825 is nickel-iron-chromium-molybdenum alloy with good corrosion resistance to sulfuric and phosphoric acids and sea water.  

The chemical composition of Incoloy 825 fasteners is as follows

Element

Min

Max

Ni + Co

38.0

46.0

Co

---

2.00

Cr

19.5

23.5

Cu

1.50

3.00

Fe

22.0

---

Si

--

0.50

Mn

--

1.00

C

--

0.05

Al

---

0.20


The mechanical property of Incoloy 825 fasteners is as follows

Form

Condition

Ultimate
 Tensile
 Strength,
 ksi (MPa)

Yield
 Strength
 at 0.2%
 offset,
 ksi (MPa)

Elongation
 in 2"
 or 4D, percent

Incoloy 825 Fasteners

Annealed
 Annealed


100 (689)
 95 (655)


55 (379)
 45 (310)


39
 44


As per heat treatment of Incoloy 825 fasteners, we could do, solution and ageing treatment, Tempering, Hardening, Spheroidizing, Stress Relieving as per the requirement of the clients

In order to control the quality of Incoloy 825 fasteners, we have following inspection equipment:size inspection equipment,Digital Vernier Callipers,Digital Micrometers,Slip Gauge Sets,Adjustable Dial Snap Gauges,Thread Ring Gauges,Thread Plug Gauges,Wear Check Plugs for Thread Gauges,Distance Gauges,Adjustable Dial Snap Gauges,Height Gauges,System 21 Ring Gauge,Rotational Capacity

As per the packing of Incoloy 825 fasteners, In addition to the standard cartons, we also provides small box packing, color-printed carton, polybag packing, custom label with barcode etc.

In order to control the quality of Incoloy 825 fasteners materail, we could do following test as per the requirement of the clients:tensile tests,impact test,hardness test (Brinell, Vickers, Rockwell),magnetic partlice examination,penetrants test (surface for fissures),ultrasonic examination,

Our Incoloy 825 fasteners are widely used in Marine engineering,Chemical and hydrocarbon processing equipment,Gasoline and freshwater tanks,Crude petroleum stills,De-aerating heaters,Boiler feed water heaters and other heat exchangers,Valves, pumps,Industrial heat exchangers,Chlorinated solvents,Crude oil distillation towers and so on

Also we could supply Incoloy 825 fasteners quality inspection certificate by third party,like TUV, GL, LR, ABS, DNV, RINA, BV and so on

Please send us the size or drawing of Incoloy 825 fasteners that you need, we are glad to quote the best price

Except Incoloy 825 fasteners,we also could produce Incoloy 825 flanges,Incoloy 825 plates,Incoloy 825 bars,Incoloy 825 bolts,Incoloy 825 pipe fittings,Incoloy 825 pipes,Incoloy 825 tubes,Incoloy 825 springs