Products

Incoloy 800HT Fasteners
Home > Products > Fastener

We produce Incoloy 800HT fasteners,Incoloy800HT fasteners,Incoloy 800HT studs,Incoloy 800HT Nuts,Incoloy 800HT Screws,Incoloy 800HT bolts,Incoloy 800HT Washers,Incoloy 800HT Sockets,Incoloy 800HT pins,Incoloy 800HT turnbuckles,Incoloy 800HT socket screws,Incoloy 800HT HEAVY HEX NUT,Incoloy 800HT HEX NUT,Incoloy 800HT Rivets,Incoloy 800HT coupling nuts and Incoloy 800HT pins in china

The type of Incoloy 800HT nuts that we could do is as follows:Incoloy 800HT Hex Nuts,Incoloy 800HT Heavy Hex Nut,Incoloy 800HT Cap Nut,Acorn Nut,Serrated Flange Nut,Coupling Nut,Square Nut,Castle Nut,Wing Nut,Flange Lock Nut,Flex Lock NutnK Lock Nut,Jam Nut,Slotted Nut,Way Lock Nut,Custom Nut,T Nuts

The type of Incoloy 800HT bolts that we could do is as follows:Incoloy 800HT Hex Head Bolt,Carriage Bolt,Anchor Bolt,Eye Bolt,Flange Bolt,Elevator Bolt,Lag Bolt,Draw Bolt,Plow Bolt,Stove Bolt,Tap Bolt,Hanger Bolt,U Bolt,Grub Screw,Shoulder Bolt,Step Bolt,J Bolt

The type of Incoloy 800HT screws that we could do is as follows:Incoloy 800HT Socket Head Cap Screws,Flat Socket Cap Screws,Button Head Socket Screw, Low Head Cap Screws, Countersunk Socket Screws,Socket Cap screws,Socket Set screws and so on

The type of Incoloy 800HT studs that we could do is as follows: Incoloy 800HT Thread Studs,Collar Studs,Combo Studs,Double End Studs,Pad Studs,engineer studs,Tap End Studs

The type of Incoloy 800HT washers that we could do is as follows:Incoloy 800HT Flat Washer,Spring Washers,Dome Washer,Hexagonal Washer,Square Washer,Countersunk WasherTooth Lock Washer,Dock Washer,Fender Washer,Ogee Washer,Hex Washers,Split / Lock Washer,Customized Washer,Tab Washers

As per surface finish of Incoloy 800HT fasteners. we could do Cadmium Plating,Cadmium Yellow,Chrysler Specs,Zinc and Black Dichromate,Zinc and Yellow Dichromate,Zinc Plating as per the requirement of the clients

Incoloy 800HT an iron-nickel-chromium alloy having the same basic composition as Alloy 800, with significantly higher creep rupture strength.

The chemical composition of Incoloy 800HT fasteners is as follows

Element

Incoloy 800HT

Ni

30.00-35.00

Cr

19.00-23.00

Fe

39.50 min

C

0.06-0.10

Al

0.25-0.60

Ti

0.25-0.60

Al + Ti

0.85-1.20

The mechanical property of Incoloy 800HT fasteners is as follows

Keyproperties (in annealed condition)

·                      Tensile strength: 54.00KSI–77.00KSI

·                      Yield strength: 13.00KSI–21.00KSI

·                      Elongation: 18.00–23.00%

As per heat treatment of Incoloy 800HT fasteners, we could do, solution and ageing treatment, Tempering, Hardening, Spheroidizing, Stress Relieving as per the requirement of the clients

In order to control the quality of Incoloy 800HT fasteners, we have following inspection equipment:size inspection equipment,Digital Vernier Callipers,Digital Micrometers,Slip Gauge Sets,Adjustable Dial Snap Gauges,Thread Ring Gauges,Thread Plug Gauges,Wear Check Plugs for Thread Gauges,Distance Gauges,Adjustable Dial Snap Gauges,Height Gauges,System 21 Ring Gauge,Rotational Capacity

As per the packing of Incoloy 800HT fasteners, In addition to the standard cartons, we also provides small box packing, color-printed carton, polybag packing, custom label with barcode etc.

In order to control the quality of Incoloy 800HT fasteners materail, we could do following test as per the requirement of the clients:tensile tests,impact test,hardness test (Brinell, Vickers, Rockwell),magnetic partlice examination,penetrants test (surface for fissures),ultrasonic examination,

Our Incoloy 800HT fasteners are widely used in Drilling & Boring Equipment ,Wellhead Manufacture,Repair or Servicing Companies,Pipeline Construction & Repair.Pumping & Refining Equipment,Oil Extraction Systems,Oil Rig Construction,Repair & Maintenance Subcontractors ,Upstream, Midstream or Downstream Service Providers .Isolation Valves & Choke Equipment Manufacturers,Submersible Watercraft and so on

Also we could supply Incoloy 800HT fasteners quality inspection certificate by third party,like TUV, GL, LR, ABS, DNV, RINA, BV and so on

Please send us the size or drawing of Incoloy 800HT fasteners that you need, we are glad to quote the best price

Except Incoloy 800HT fasteners,we also could produce Incoloy 800HT flanges,Incoloy 800HT plates,Incoloy 800HT bars,Incoloy 800HT bolts,Incoloy 800HT pipe fittings,Incoloy 800HT pipes,Incoloy 800HT tubes,Incoloy 800HT springs