INCONEL 713C Fasteners
Home > Products > Fastener

We produce INCONEL 713C fasteners,INCONEL713C fasteners,INCONEL 713C studs,INCONEL 713C Nuts,INCONEL 713C Screws,INCONEL 713C bolts,INCONEL 713C Washers,INCONEL 713C Sockets,INCONEL 713C pins,INCONEL 713C turnbuckles,INCONEL 713C socket screws,INCONEL 713C HEAVY HEX NUT,INCONEL713C HEX NUT,INCONEL713C Rivets,INCONEL 713C coupling nuts and INCONEL 713C pins in china

The type of INCONEL 713C nuts that we could do is as follows:INCONEL 713C Hex Nuts,INCONEL 713C Heavy Hex Nut,INCONEL713C Cap Nut,Acorn Nut,Serrated Flange Nut,Coupling Nut,Square Nut,Castle Nut,Wing Nut,Flange Lock Nut,Flex Lock NutnK Lock Nut,Jam Nut,Slotted Nut,Way Lock Nut,Custom Nut,T Nuts

The type of INCONEL 713C bolts that we could do is as follows:INCONEL713C Hex Head Bolt,Carriage Bolt,Anchor Bolt,Eye Bolt,Flange Bolt,Elevator Bolt,Lag Bolt,Draw Bolt,Plow Bolt,Stove Bolt,Tap Bolt,Hanger Bolt,U Bolt,Grub Screw,Shoulder Bolt,Step Bolt,J Bolt

The type of INCONEL 713C screws that we could do is as follows:INCONEL 713C Socket Head Cap Screws,Flat Socket Cap Screws,Button Head Socket Screw, Low Head Cap Screws, Countersunk Socket Screws,Socket Cap screws,Socket Set screws and so on

The type of INCONEL 713C studs that we could do is as follows: INCONEL 713C Thread Studs,Collar Studs,Combo Studs,Double End Studs,Pad Studs,engineer studs,Tap End Studs

The type of INCONEL 713C washers that we could do is as follows:INCONEL 713C Flat Washer,Spring Washers,Dome Washer,Hexagonal Washer,Square Washer,Countersunk WasherTooth Lock Washer,Dock Washer,Fender Washer,Ogee Washer,Hex Washers,Split / Lock Washer,Customized Washer,Tab Washers

As per surface finish of INCONEL 713C fasteners. we could do Cadmium Plating,Cadmium Yellow,Chrysler Specs,Zinc and Black Dichromate,Zinc and Yellow Dichromate,Zinc Plating as per the requirement of the clients

INCONEL 713C is a nickel-chromium alloy

The chemical composition of INCONEL713C fasteners is as follows

Chemical Compositionof Inconel  713C

·        C 0.20

·        Mn: 1.0 max

·        S:0.015 max

·        Si: 1.0 max

·        Cr: 11.0-14.0

·        Mo: 3.5-5.5

·        Ti: 0.25-1.25

·        Al: 5.5-6.5

·        Fe: 5.0 max

·        Nb + Ta 1.0-3.0

·        Ni:remainder

The mechanical property of INCONEL 713C fasteners is as follows

Mechanical Properties
Annealed Material


Tensile Min.

Yield Min. (.2% offset)

Elongation Min.

Reduction of Area Min.

Bar (hot or cold finished)

124 ksi

106 ksi



As per heat treatment of INCONEL 713C fasteners, we could do, solution and ageing treatment, Tempering, Hardening, Spheroidizing, Stress Relieving as per the requirement of the clients

In order to control the quality of INCONEL 713C fasteners, we have following inspection equipment:size inspection equipment,Digital Vernier Callipers,Digital Micrometers,Slip Gauge Sets,Adjustable Dial Snap Gauges,Thread Ring Gauges,Thread Plug Gauges,Wear Check Plugs for Thread Gauges,Distance Gauges,Adjustable Dial Snap Gauges,Height Gauges,System 21 Ring Gauge,Rotational Capacity

As per the packing of INCONEL 713C fasteners, In addition to the standard cartons, we also provides small box packing, color-printed carton, polybag packing, custom label with barcode etc.

In order to control the quality of INCONEL 713C fasteners materail, we could do following test as per the requirement of the clients:tensile tests,impact test,hardness test (Brinell, Vickers, Rockwell),magnetic partlice examination,penetrants test (surface for fissures),ultrasonic examination,

Our INCONEL 713C fasteners are widely used in heat exchanger, boiler and pressure vessel manufacturing, pump & valve construction,steam & gas turbines, hydro power applications,petrochemical industries as well as oil and gas industries and so on

Also we could supply INCONEL 713C fasteners quality inspection certificate by third party,like TUV, GL, LR, ABS, DNV, RINA, BV and so on

Please send us the size or drawing of INCONEL 713C fasteners that you need, we are glad to quote the best price

Except INCONEL 713C fasteners,we also could produce INCONEL 713C flanges,INCONEL 713C plates,INCONEL 713C bars,INCONEL 713C bolts,INCONEL 713C pipe fittings,INCONEL 713C pipes,INCONEL 713C tubes,INCONEL 713C springs