Products

Inconel 725 Bolts
Home > Products > Bolts

We produce inconel 725 bolts,inconel725 bolts,Inconel 725 bolting,inconel 725 Hex Head Bolts,inconel 725 studbolt,inconel 725 Heavy Hex head bolts,inconel 725 Stud Bolts,inconel 725 Anchor Bolt,inconel 725 Eye Bolt,inconel 725 U Bolts,inconel 725 Structural Bolts,inconel 725 Step Bolt,inconel 725 Flange Bolt,inconel 725 Screw Thread Eye Bolt,inconel 725 Head Plow Bolts,inconel 725 Square Head Bolts,inconel 725 Hexagonal Bolts,inconel 725 J-Bolts,inconel 725 Bent Eye Bolts,inconel 725 Elevator Bolts,inconel 725 Step Bolts,inconel 725 Tap Bolts,inconel 725 Tension Control Bolts,inconel 725 Shoulder Bolt,inconel 725 bent bolts,inconel 725 headed bolts,inconel 725 Heavy Hex head bolts,inconel 725 Timber Bolts,inconel 725 Lag Bolts,inconel 725 Timber Bolts,inconel 725 Hanger Bolt,inconel 725 Button Head Bolts,inconel 725 Tie Bolt,inconel 725 Hexagon Bolt,inconel 725 Hexagon Cap Screw Bolt from china

The type of inconel 725 anchor bolts that we could do is inconel 725 straight anchor bolts, bent anchor bolts and headed anchor bolts

The type of inconel 725 bent bolts that we could do is inconel 725 bent anchor bolts, u-bolts, square bent u-bolts, j-bolts, bent tie bolts, bent check bolts, bent hook rail bolts, bent I-bolts, and custom special bent bolts.

The type of inconel 725 headed bolts that we could do is inconel 725 Cap Screws head bolts,Hex head bolts,Heavy Hex head bolts,Lag Bolts,Square Head bolts,Step Bolts,Dome Head bolts,Carriage boltds,Socket Head Bolts

We could produce inconel 725 non-standard and speciality large bolts from 1/4” all the way to 4” and in metric sizes from M8 to M100.

The surface finish of inconel 725 bolts that we could do is as follows:Hot Dip Galvanized,Mechanical Galvanized,Zinc plated (Clear),Yellow Zinc plated,Cadmium plated,Yellow Cadmium plated,Blue Xylan or Blue Teflon,Green Xylan or Green Teflon.Black Oxide,Plain surface,Ni-plated, Passivated, Tin-plated, Sandblast and Anodize, Polish, Eletro Painting, Chrome plated etc.

In order to control the quality of inconel 725 bolts, the material of inconel 725 bars is melted by ESR+VIR or VIM+ESR+VAR and is produced as the standard of ASTM B166 and ASTM B564

Inconel 725 is a nickel chromium-molybdenum-niobium alloy

The chemical composition of inconel 725 bolts is as follows

Nominal Composition

Element

Weight %

Carbon

0.03 max

Silicon

0.20

Manganese

0.35

Phosphorus

0.015 max

Sulphur

0.01 max

Molybdenum

7.0 – 9.5

Chromium

19.0 – 22.5

Nickel

55.0 – 59.0 max

Aluminium

0.35

Titanium

1.0 – 1.7

Niobium + Tantulum

2.75 – 4.00

Iron

Balance

The mechanical property of inconel 725 bolts

Condition: Solutionannealed followed by age hardening

Property

Typical Values

Ultimate Tensile  Strength

965 Mpa

0.2 % Yield Strength

827 Mpa

Elongation

20 % min

Reduction of Area

35 % min

Charpy Impact Toughness

40J mean at 20o C

Hardness

43 HRc max

As per heat treatment of inconel 725 bolts, we could do, solution and ageing treatment, Tempering, Hardening, Spheroidizing, Stress Relieving as per the requirement of the clients

Inconel 725 bolts has been widely used in Condensers, Rotary Vacuum Dryers,Flavor Processing ,Equipment,Slurry Tanks.Surge Tanks,Boilers & Boiler ancillary equipments.Heat Exchanger & Coils,Continuous Steam Sterilizer.Conveyor Dryer,Gass liquied Fermenters.Static Mixer.Twin Sharft Dispersers,crystalizer equipment,Wellhead and Christmas tree. power transmission, turbine,gas compressor,gear boxes and so on

In order to control the quality of inconel 725 bolts, We could do Hardness Testing,Proof load testing,Corrosion testing,Impact testing,Tensile strength tests,Finished product tests,Chemical analysis tests,CHARPY tests as per the requirement of the clients

Our inconel 725 bolts has been 100% ultrasonic test according to EN10228-3, SA388, Sep 1921  etc

We could supply inconel 725 bolt material certificate as per the standard of EN10204-3.1 or EN10204-3.2 of third party(like GL,DNV,TUV,BV and so on)

Please sned us the size or drawing of inconel 725 bolts, we are glad to quote the best price for your side.

Except inconel 725 bolts,we also could produce inconel 725 flanges,inconel 725 plates,inconel 725 fastener,inconel 725 bars,inconel 725 pipe fittings,inconel 725 pipes,inconel 725 tubes,inconel 725 springs