We could produce UNS S45500 bars, S45500 bars,UNS S45500 round bars, UNS S45500 rods,UNS S45500 square bars,UNS S45500 flat bars,UNS S45500 hot rolled bars, S45500 cold drawn bright bars,S45500 forged bars, UNS S45500 forging bars,UNS S45500 Hexagon Bar,UNS S45500 rectangular bars from china.
We could produce UNS S45500 bars with diamter from from 5MM to 1000MM and length up to 15 metres
UNS S45500 is a martensitic stainless steel
The chemical composition of UNS S45500 bars is as follows
Element | Content (%) |
Iron, Fe | 73 |
Chromium, Cr | 11.8 |
Nickel, Ni | 8.5 |
Niobium, Nb (Columbium, Cb) | 2 |
Copper, Cu | 2 |
Titanium, Ti | 1.1 |
Manganese, Mn | 0.50 |
Molybdenum, Mo | 0.50 |
Silicon, Si | 0.50 |
Carbon, C | 0.050 |
Phosphorous, P | 0.040 |
Sulfur, S | 0.030 |
The mechanical property of S45500 bars is as follows
Properties | Metric | Imperial |
Tensile strength (@ diameter 102 mm/4 in) | 965 MPa | 140000 psi |
Yield strength (@ strain 0.200%, diameter 25.4 mm/1 in) | 795 MPa | 115000 psi |
Charpy Impact | 95 J | 70.1 ft-lb |
Elongation at break (@ diameter 102 mm/4 in, in 50 mm) | 12% | 12% |
Hardness, Brinell (@ diameter 25.4 mm/ 1 in, converted from Rockwell C hardness) | 297 | 297 |
Hardness, Knoop (@ diameter 25.4 mm/ 1 in, converted from Rockwell C hardness) | 318 | 318 |
Hardness, Vickers (diameter 25.4 mm/ 1 in, converted from Rockwell C hardness) | 308 |
|
We could produce UNS S45500 bars as per the standard of ASTM B462 and ASTM B473
In order to improve the quality of UNS S45500 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS S45500 bar
As per heat treatment of UNS S45500 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients
We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients
We also could do 100% Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on
We could supply UNS S45500 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)
In order to control the quality of S45500 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients
As per surface finish of UNS S45500 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface
Our UNS S45500 bars are widely used in Vacuum Kettle Dryer.Cistern Piler.Vacuum Strainer,Agitators.Chemical Reactor and Systems,Expansion Tank.Water Tank,Lifting Station Tank,Air Drying Plants,Condensers,Balance Valves,Needle Valves,Twin Sharft Dispersers,Chemical and petroleum process equipment and so on
In order to export our S45500 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.
Please tell us the size and quantity of UNS S45500 bars UNS S45500 round bars, S45500 rods,that you need, we are glad to quote the best price for you
Except UNS S45500 bars,we also could produce UNS S45500 flanges,UNS S45500 plates,UNS S45500 fastener,UNS S45500 bolts,UNS S45500 fittings,UNS S45500 pipes,UNS S45500 tubes,UNS S45500 springs
-
New
·1.4898 Bars ·1.4886 Bars ·1.4529 Bars ·1.4876 Bars ·2.4856 Bars ·2.4851 Bars ·2.4816 Bars ·2.4668 Bars ·2.4663 Bars ·2.4642 Bars -
Any
·UNS N07041 Bars ·AL-6XN Bars ·UNS N06686 Bars ·Nitronic 50 Bars ·Hastelloy C-22 Bars ·UNS N06035 Bars ·UNS S32760 Bars ·UNS S32654 Bars ·UNS S35315 Bars ·UNS R31233 Bars -
Hot
·Inconel 600 Bars ·Inconel 601 Bars ·Inconel 617 Bars ·Inconel 625 Bars ·Inconel 686 Bars ·Inconel 690 Bars ·Inconel 693 Bars ·Inconel 718 Bars ·Inconel 725 Bars ·Inconel 751 Bars