UNS S32109 Bars
Home > Products > Bars

We could produce UNS S32109 bars, S32109 bars,UNS S32109 round bars, UNS S32109 rods,UNS S32109 square bars,UNS S32109 flat bars,UNS S32109 hot rolled bars, S32109 cold drawn bright bars,S32109 forged bars, UNS S32109 forging bars,UNS S32109 Hexagon Bar,UNS S32109 rectangular bars from china.

We could produce UNS S32109 bars with diamter from from 5MM to 1000MM and length up to 15 metres

UNS S32109 is a general purpose austenitic stainless steel that is stabilized against carbide precipitation and designed to work within the carbide precipitation temperature range 427 to 816°C (800 to 1500°F)

The chemical composition of UNS S32109 bars is as follows


Content (%)

Iron,  Fe


Chromium,  Cr


Nickel,  Ni


Manganese,  Mn


Silicon,  Si


Titanium,  Ti


Phosphorous,  P


Carbon,  C


Sulfur,  S


The mechanical property of S32109 bars is as follows




Tensile  strength

480 MPa

69600 psi

Yield  strength

205 MPa

29700 ksi

Elongation  at break



Hardness,  Brinell



We could produce UNS S32109 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of UNS S32109 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS S32109 bar

As per heat treatment of UNS S32109 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply UNS S32109 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of S32109 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of UNS S32109 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our UNS S32109 bars are widely used in Heat shields,Combustion and chimney liners,Valves,Piping,Distillation columns,Bubble caps,Reaction vessels Heat exchangers,Furnace,Gas turbine engine duct work,Equipment used to produce acid and so on

In order to export our S32109 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of UNS S32109 bars UNS S32109 round bars, S32109 rods,that you need, we are glad to quote the best price for you

Except UNS S32109 bars,we also could produce UNS S32109 flanges,UNS S32109 plates,UNS S32109 fastener,UNS S32109 bolts,UNS S32109 fittings,UNS S32109 pipes,UNS S32109 tubes,UNS S32109 springs