Products

UNS S31635 Bars
Home > Products > Bars

We could produce UNS S31635 bars, S31635 bars,UNS S31635 round bars, UNS S31635 rods,UNS S31635 square bars,UNS S31635 flat bars,UNS S31635 hot rolled bars, S31635 cold drawn bright bars,S31635 forged bars, UNS S31635 forging bars,UNS S31635 Hexagon Bar,UNS S31635 rectangular bars from china.

We could produce UNS S31635 bars with diamter from from 5MM to 1000MM and length up to 15 metres

UNS S31635 contains a small amount of titanium. Titanium content is typically only around 0.5%.

The chemical composition of UNS S31635 bars is as follows

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

N

316Ti

Min

-

-

-

-

-

16.5

2.00

10.5

Ti

Max

0.08

2.0

0.75

0.045

0.03

18.5

3.00

14.5

0.50


The mechanical property of S31635 bars is as follows

Grade

Tensile Strength
 (
MPa) min

Yield Strength
 0.2% Proof
 (
MPa) min

Elongation
 (% in
50mm) min

Hardens

Rockwell B (HR B) max

Brinell (HB) max

316Ti

515

205

40

95

217


We could produce UNS S31635 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of UNS S31635 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS S31635 bar

As per heat treatment of UNS S31635 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply UNS S31635 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of S31635 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of UNS S31635 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our UNS S31635 bars are widely used in Heavy Truck,Construction Equipment,Oil, Gas & Energy,Railway,Agriculture & Forestry,Ship Building,Cars & Light Vehicles,Defence,Aerospace Machining,Fabrications,General Engineering and so on

In order to export our S31635 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of UNS S31635 bars UNS S31635 round bars, S31635 rods,that you need, we are glad to quote the best price for you

Except UNS S31635 bars,we also could produce UNS S31635 flanges,UNS S31635 plates,UNS S31635 fastener,UNS S31635 bolts,UNS S31635 fittings,UNS S31635 pipes,UNS S31635 tubes,UNS S31635 springs