Products

UNS S31600 Bars
Home > Products > Bars


We could produce UNS S31600 bars, S31600 bars,UNS S31600 round bars, UNS S31600 rods,UNS S31600 square bars,UNS S31600 flat bars,UNS S31600 hot rolled bars, S31600 cold drawn bright bars,S31600 forged bars, UNS S31600 forging bars,UNS S31600 Hexagon Bar,UNS S31600 rectangular bars from china.

We could produce UNS S31600 bars with diamter from from 5MM to 1000MM and length up to 15 metres

UNS S31600 is an austenitic grade second only to 304 in commercial importance

The chemical composition of UNS S31600 bars is as follows

%

AISI 316

C

0.08  max

Mn

2.0

Si

0.75

P

0.045

S

0.03

Cr

16-18

Ni

10-14

N

0.1


The mechanical property of S31600 bars is as follows

Grade

Tensile Strength
 (
MPa) min

Yield Strength
 0.2% Proof
 (
MPa) min

Elongation
 (% in
50mm) min

Hardens

Rockwell B (HR B) max

Brinell (HB) max

AISI 316

515

205

40

95

217


We could produce UNS S31600 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of UNS S31600 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS S31600 bar

As per heat treatment of UNS S31600 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply UNS S31600 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of S31600 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of UNS S31600 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our UNS S31600 bars are widely used in ANCILLARY INDUSTRIES,Alternative Fuel Systems,Research & Design Projects,Geothermal Power Plants,Wind Farm Maintenance ,Solar (Photovoltaics) Power Equipment ,Hydro-Electric Power Plant,Coal-fueled, Oil-fueled or Nuclear Power Plant Maintenance ,Natural Gas Storage & Plant Maintenance Boiler Systems ,Turbine Manufacturers ,Transmission, Distribution & Storage Equipment Manufacturers,Motors & Generators and so on

In order to export our S31600 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of UNS S31600 bars UNS S31600 round bars, S31600 rods,that you need, we are glad to quote the best price for you

Except UNS S31600 bars,we also could produce UNS S31600 flanges,UNS S31600 plates,UNS S31600 fastener,UNS S31600 bolts,UNS S31600 fittings,UNS S31600 pipes,UNS S31600 tubes,UNS S31600 springs