Products

UNS S30908 Bars
Home > Products > Bars

We could produce UNS S30908 bars, S30908 bars,UNS S30908 round bars, UNS S30908 rods,UNS S30908 square bars,UNS S30908 flat bars,UNS S30908 hot rolled bars, S30908 cold drawn bright bars,S30908 forged bars, UNS S30908 forging bars,UNS S30908 Hexagon Bar,UNS S30908 rectangular bars from china.

We could produce UNS S30908 bars with diamter from from 5MM to 1000MM and length up to 15 metres

UNS S30908 is Another stainless steel for use at high temperatures but with lower nickel than GRADE 310 enabling the alloy to be more resistant to sulphidation.

The chemical composition of UNS S30908 bars is as follows

Carbon

0.08 max

Chromium

22 - 24

Iron

Balance

Manganese

2 max

Nickel

12 - 15

Phosphorus

0.045 max

Silicon

1 max

Sulphur

0.03 max


The mechanical property of S30908 bars is as follows

Properties

Metric

Imperial

Tensile  strength, ultimate

620 MPa

89900 psi

Tensile  strength, yield (0.2%)

310 MPa

45000 psi

Elongation  at break (in 50 mm)

45%

45%

Hardness,  Brinell (converted from Rockwell B hardness)

147

147

Hardness,  Knoop (converted from Rockwell B hardness)

164

164

Hardness,  Rockwell B

85

85

Hardness,  Vickers (converted from Rockwell B hardness)

169

169


We could produce UNS S30908 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of UNS S30908 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS S30908 bar

As per heat treatment of UNS S30908 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply UNS S30908 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of S30908 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of UNS S30908 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our UNS S30908 bars are widely used in Vacuum Kettle Dryer.Cistern Piler.Vacuum Strainer,Agitators.Chemical Reactor and Systems,Expansion Tank.Water Tank,Lifting Station Tank,Air Drying Plants,Condensers,Balance Valves,Needle Valves,Twin Sharft Dispersers,Chemical and petroleum process equipment and so on

In order to export our S30908 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of UNS S30908 bars UNS S30908 round bars, S30908 rods,that you need, we are glad to quote the best price for you

Except UNS S30908 bars,we also could produce UNS S30908 flanges,UNS S30908 plates,UNS S30908 fastener,UNS S30908 bolts,UNS S30908 fittings,UNS S30908 pipes,UNS S30908 tubes,UNS S30908 springs