Products

UNS S13800 Bars
Home > Products > Bars

We could produce UNS S13800 bars, S13800 bars,UNS S13800 round bars, UNS S13800 rods,UNS S13800 square bars,UNS S13800 flat bars,UNS S13800 hot rolled bars, S13800 cold drawn bright bars,S13800 forged bars, UNS S13800 forging bars,UNS S13800 Hexagon Bar,UNS S13800 rectangular bars from china.

We could produce UNS S13800 bars with diamter from from 5MM to 1000MM and length up to 15 metres

UNS S13800 is a precipitation hardenable stainless. It is a medium to high strength material achieved through appropriate ageing treatments (see table below) and contains very good resistance to stress corrosion.

The chemical composition of UNS S13800 bars is as follows

Chemical Composition (Wt %)


C

Si

Mn

P

S

Cr

Mo

Ni

Al

N

Fe

Min

-

-

-

-

-

12.24

2.00

7.50

0.90

-

Bal

Max

0.05

0.10

0.10

0.01

0.008

13.25

2.50

8.50

1.35

0.010

-



The mechanical property of S13800 bars is as follows

Typical Mechanical Properties


0.2% proof Stress

Tensile Strength

Elongation

Reduction of area

Hardnesss

MPA

MPA

%

%

HRC

Min

Min

Min

Min

Min

L

T

H950

1413

1517

10

45

35

45

H1000

1310

1413

10

60

40

43

H1025

1207

1276

11

50

45

41

H1050

1138

1207

12

50

45

40

H1100

931

1034

14

50

50

34

H1150

621

931

14

50

50

30



We could produce UNS S13800 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of UNS S13800 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS S13800 bar

As per heat treatment of UNS S13800 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply UNS S13800 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of S13800 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of UNS S13800 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our UNS S13800 bars are widely used in EPC,Refineries,Chemical & Petrochemical Industry,Power Plants,Offshore & On Shore,Docks,Engineering & Fabrication Units,Oil and Gas Industry,Ship Building Industry,Water Treatment Plants,Fertilizers Industry.Sugar Company and so on

In order to export our S13800 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of UNS S13800 bars UNS S13800 round bars, S13800 rods,that you need, we are glad to quote the best price for you

Except UNS S13800 bars,we also could produce UNS S13800 flanges,UNS S13800 plates,UNS S13800 fastener,UNS S13800 bolts,UNS S13800 fittings,UNS S13800 pipes,UNS S13800 tubes,UNS S13800 springs