We could produce UNS R30783 bars, R30783 bars,UNS R30783 round bars, UNS R30783 rods,UNS R30783 square bars,UNS R30783 flat bars,UNS R30783 hot rolled bars, R30783 cold drawn bright bars,R30783 forged bars, UNS R30783 forging bars,UNS R30783 Hexagon Bar,UNS R30783 rectangular bars from china.
We could produce UNS R30783 bars with diamter from from 5MM to 1000MM and length up to 15 metres
UNS R30783 are also known as high performance alloys specially designed to cater to environments with very high temperature of above 540°C (1000°F) where deformation resistance and high surface stability are essential.
The chemical composition of UNS R30783 bars is as follows
Element | Content (%) |
Nickel, Ni | 26-30 |
Iron, Fe | 24-27 |
Aluminum, Al | 5-6 |
Chromium, Cr | 2.5-3.5 |
Niobium, Nb | 2.5-3.5 |
Copper, Cu | 0.50 max |
Manganese, Mn | 0.50 max |
Silicon, Si | 0.50 max |
Titanium, Ti | 0.10-0.40 |
Carbon, C | 0.03 max |
Boron, B | 0.003-0.012 |
Phosphorus, P | 0.015 max |
Sulfur, S | 0.005 max |
Cobalt, Co | Balance |
The mechanical property of R30783 bars is as follows
Properties | Metric | Imperial |
Tensile strength | 1194 MPa | 171 ksi |
Yield strength | 779 MPa | 113 ksi |
Poisson’s ratio | 0.31 | 0.31 |
Elastic modulus | 177.3 GPA | 25.72 ksi |
Elongation at break | 24% | 24% |
We could produce UNS R30783 bars as per the standard of ASTM B462 and ASTM B473
In order to improve the quality of UNS R30783 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS R30783 bar
As per heat treatment of UNS R30783 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients
We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients
We also could do 100% Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on
We could supply UNS R30783 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)
In order to control the quality of R30783 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients
As per surface finish of UNS R30783 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface
Our UNS R30783 bars are widely used in heat exchanger, boiler and pressure vessel manufacturing, pump & valve construction,steam & gas turbines, hydro power applications,petrochemical industries as well as oil and gas industries and so on
In order to export our R30783 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.
Please tell us the size and quantity of UNS R30783 bars UNS R30783 round bars, R30783 rods,that you need, we are glad to quote the best price for you
Except UNS R30783 bars,we also could produce UNS R30783 flanges,UNS R30783 plates,UNS R30783 fastener,UNS R30783 bolts,UNS R30783 fittings,UNS R30783 pipes,UNS R30783 tubes,UNS R30783 springs
-
New
·1.4898 Bars ·1.4886 Bars ·1.4529 Bars ·1.4876 Bars ·2.4856 Bars ·2.4851 Bars ·2.4816 Bars ·2.4668 Bars ·2.4663 Bars ·2.4642 Bars -
Any
·Inconel 625LCF Bars ·A182-F49 Bars ·UNS S46500 Bars ·UNS S20910 Bars ·UNS N12160 Bars ·UNS S30908 Bars ·UNS N02200 Bars ·A182-F53 Bars ·Inconel 718 Bars ·Incoloy 901 Bars -
Hot
·Inconel 600 Bars ·Inconel 601 Bars ·Inconel 617 Bars ·Inconel 625 Bars ·Inconel 686 Bars ·Inconel 690 Bars ·Inconel 693 Bars ·Inconel 718 Bars ·Inconel 725 Bars ·Inconel 751 Bars