Products

UNS N30155 Bars
Home > Products > Bars

We could produce UNS N30155 bars, N30155 bars,UNS N30155 round bars, UNS N30155 rods,UNS N30155 square bars,UNS N30155 flat bars,UNS N30155 hot rolled bars, N30155 cold drawn bright bars,N30155 forged bars, UNS N30155 forging bars,UNS N30155 Hexagon Bar,UNS N30155 rectangular bars from china.

We could produce UNS N30155 bars with diamter from from 5MM to 1000MM and length up to 15 metres

UNS N30155 has high temperature properties which are inherent and do not depend upon age hardening. It is recommended for applications involving high stresses at temperatures up to 1500°F, and can be used up to 2000°F where only moderate stresses are involved

The chemical composition of UNS N30155 bars is as follows

Element

Min

Max

Carbon

0.08

0.16

Manganese

1.00

2.00

Silicon

--

1.00

Sulfur

--

0.03

Chromium

20.0

22.5

Nickel

19.0

21.0

Copper

--

0.50

Tungsten

2.00

3.00

Iron

Balance

Cobalt

18.5

21.0

Columbium*

0.75

1.25

Nitrogen

0.10

0.20

Molybdenum

2.50

3.50

Phosphorus

--

0.04


The mechanical property of N30155 bars is as follows

Test
 Temperature

Yield
 Strength

Tensile Strength
 0.2% Offset

%
 Elongation
 in 2"

%
 Reduction
 of Area

°F

°C

ksi

MPa

ksi

MPa

Room
 1000
 1200
 1400
 1600
 1800
 2000

Room
 538
 649
 760
 871
 982
 1093

118
 93
 80
 60
 38
 19
 10

314
 641
 552
 414
 262
 131
 69

59
 44
 42
 38
 26
 18
 --

407
 303
 290
 262
 179
 124
 --

40
 37
 35
 35
 37
 38
 45

50
 48
 47
 42
 42
 50
 60


We could produce UNS N30155 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of UNS N30155 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS N30155 bar

As per heat treatment of UNS N30155 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply UNS N30155 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of N30155 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of UNS N30155 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our UNS N30155 bars are widely used in Heavy Truck,Construction Equipment,Oil, Gas & Energy,Railway,Agriculture & Forestry,Ship Building,Cars & Light Vehicles,Defence,Aerospace Machining,Fabrications,General Engineering and so on

In order to export our N30155 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of UNS N30155 bars UNS N30155 round bars, N30155 rods,that you need, we are glad to quote the best price for you

Except UNS N30155 bars,we also could produce UNS N30155 flanges,UNS N30155 plates,UNS N30155 fastener,UNS N30155 bolts,UNS N30155 fittings,UNS N30155 pipes,UNS N30155 tubes,UNS N30155 springs