We could produce UNS N13017 bars, N13017 bars,UNS N13017 round bars, UNS N13017 rods,UNS N13017 square bars,UNS N13017 flat bars,UNS N13017 hot rolled bars, N13017 cold drawn bright bars,N13017 forged bars, UNS N13017 forging bars,UNS N13017 Hexagon Bar,UNS N13017 rectangular bars from china.
We could produce UNS N13017 bars with diamter from from 5MM to 1000MM and length up to 15 metres
UNS N13017 is nickel-based superalloys
The chemical composition of UNS N13017 bars is as follows
Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
Mo | 5.0 |
|
|
Al | 4.0 |
|
|
Ti | 3.5 |
|
|
Co | 17.0 |
|
|
Cr | 15.0 |
|
|
C | 0.04 |
|
|
B | 0.025 |
|
|
Ni | Balance |
The mechanical property of N13017 bars is as follows
Tensile Strength
ksi | MPa |
185 min | 1,275 min |
Yield Strength
ksi | MPa |
140 min | 965 min |
Hardness
36 HRC max |
Elongation
10% min |
We could produce UNS N13017 bars as per the standard of ASTM B462 and ASTM B473
In order to improve the quality of UNS N13017 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS N13017 bar
As per heat treatment of UNS N13017 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients
We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients
We also could do 100% Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on
We could supply UNS N13017 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)
In order to control the quality of N13017 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients
As per surface finish of UNS N13017 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface
Our UNS N13017 bars are widely used in Continuous Steam Sterilizer,Chamber Dryer.Size Cooker.Hydro Extractor,Petroleum Refining fluid catalytic cracking units,high-pressure (microbial) deep-sea sampler and incubation chambers,Mixing tanks,CNG Storage.LNG Cryogenics,Scrubbers and so on
In order to export our N13017 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.
Please tell us the size and quantity of UNS N13017 bars UNS N13017 round bars, N13017 rods,that you need, we are glad to quote the best price for you
Except UNS N13017 bars,we also could produce UNS N13017 flanges,UNS N13017 plates,UNS N13017 fastener,UNS N13017 bolts,UNS N13017 fittings,UNS N13017 pipes,UNS N13017 tubes,UNS N13017 springs
-
New
·1.4898 Bars ·1.4886 Bars ·1.4529 Bars ·1.4876 Bars ·2.4856 Bars ·2.4851 Bars ·2.4816 Bars ·2.4668 Bars ·2.4663 Bars ·2.4642 Bars -
Any
·MONEL 502 Bars ·Nimonic 263 Bars ·UNS N06007 Bars ·UNS N06002 Bars ·UNS S32760 Bars ·Inconel 601 Bars ·UNS N06626 Bars ·UNS N04400 Bars ·Incoloy 27-7MO Bars ·UNS S15500 Bars -
Hot
·Inconel 600 Bars ·Inconel 601 Bars ·Inconel 617 Bars ·Inconel 625 Bars ·Inconel 686 Bars ·Inconel 690 Bars ·Inconel 693 Bars ·Inconel 718 Bars ·Inconel 725 Bars ·Inconel 751 Bars