We could produce UNS N10362 bars, N10362 bars,UNS N10362 round bars, UNS N10362 rods,UNS N10362 square bars,UNS N10362 flat bars,UNS N10362 hot rolled bars, N10362 cold drawn bright bars,N10362 forged bars, UNS N10362 forging bars,UNS N10362 Hexagon Bar,UNS N10362 rectangular bars from china.

We could produce UNS N10362 bars with diamter from from 5MM to 1000MM and length up to 15 metres

UNS N10362 A new nickel-molybdenum-chromium alloy with exceptional resistance to hydrochloric acid, sulfuric acid, pitting and crevice corrosion.

The chemical composition of UNS N10362 bars is as follows

Ni ：Balance

Mo:22

Cr:15

Fe:1.25 Max

AL:0.5 Max

Mn:0.25

Si:0.18

C:0.01 max

The mechanical property of N10362 bars is as follows

Mechanical Properties
Representative Tensile and Impact Properties

Temp. °F (°C)	Ult. Tensile Strength, MPA	.2% Yield Strength, MPA	Elongation in 2”, percent
70 (21)	725	310	40

We could produce UNS N10362 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of UNS N10362 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS N10362 bar

As per heat treatment of UNS N10362 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply UNS N10362 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of N10362 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of UNS N10362 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our UNS N10362 bars are widely used in Continuous Steam Sterilizer,Chamber Dryer.Size Cooker.Hydro Extractor,Petroleum Refining  fluid catalytic cracking units,high-pressure (microbial) deep-sea sampler and incubation chambers,Mixing tanks,CNG Storage.LNG Cryogenics,Scrubbers and so on

In order to export our N10362 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of UNS N10362 bars UNS N10362 round bars, N10362 rods,that you need, we are glad to quote the best price for you

Except UNS N10362 bars,we also could produce UNS N10362 flanges,UNS N10362 plates,UNS N10362 fastener,UNS N10362 bolts,UNS N10362 fittings,UNS N10362 pipes,UNS N10362 tubes,UNS N10362 springs