We could produce UNS N10001 bars, N10001 bars,UNS N10001 round bars, UNS N10001 rods,UNS N10001 square bars,UNS N10001 flat bars,UNS N10001 hot rolled bars, N10001 cold drawn bright bars,N10001 forged bars, UNS N10001 forging bars,UNS N10665 Hexagon Bar,UNS N10001 rectangular bars from china.
We could produce UNS N10001 bars with diamter from from 5MM to 1000MM and length up to 15 metres
UNS N10001 is a Corrosion Resistant Alloy
The chemical composition of UNS N10001 bars is as follows
| % | Ni | Mo | Fe | Cr | Co | C | Mn | V | Si | P | S |
UNS N10001 | Min. | Balance | 26 | 4.0 |
|
|
|
| 0.2 |
|
|
|
Max. | 30 | 6.0 | 1.0 | 2.5 | 0.05 | 1.0 | 0.4 | 1.0 | 0.04 | 0.03 | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The mechanical property of N10001 bars is as follows
UNS N10001-The minimum mechanical behaviorof Alloy in normal temperature:
Alloy state | Tensile strength Rm N/mm2 | Yield strength RP0.2N/mm2 | Elongation A5 % |
UNS N10001 | 690 | 310 | 40 |
We could produce UNS N10001 bars as per the standard of ASTM B462 and ASTM B473
In order to improve the quality of UNS N10001 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS N10001 bar
As per heat treatment of UNS N10001 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients
We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients
We also could do 100% Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on
We could supply UNS N10001 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)
In order to control the quality of N10001 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients
As per surface finish of UNS N10001 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface
Our UNS N10001 bars are widely used in bearing industry, power-generation including steam and gas-turbine, wind energy, mining and construction equipment, oil & gas, petrochemical, defense, rail transportation, and a wide variety of general industrial applications and so on
In order to export our N10001 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.
Please tell us the size and quantity of UNS N10001 bars UNS N10001 round bars, N10001 rods,that you need, we are glad to quote the best price for you
Except UNS N10001 bars,we also could produce UNS N10001 flanges,UNS N10001 plates,UNS N10001 fastener,UNS N10001 bolts,UNS N10001 fittings,UNS N10001 pipes,UNS N10001 tubes,UNS N10001 springs
-
New
·1.4898 Bars ·1.4886 Bars ·1.4529 Bars ·1.4876 Bars ·2.4856 Bars ·2.4851 Bars ·2.4816 Bars ·2.4668 Bars ·2.4663 Bars ·2.4642 Bars -
Any
·UNS N10276 Bars ·AISI 314 Bars ·UNS S31609 Bars ·UNS N05502 Bars ·Nitronic 60 Bars ·Haynes 242 Bars ·UNS S34700 Bars ·AISI 347 Bars ·353MA Bars ·Inconel 725 Bars -
Hot
·Inconel 600 Bars ·Inconel 601 Bars ·Inconel 617 Bars ·Inconel 625 Bars ·Inconel 686 Bars ·Inconel 690 Bars ·Inconel 693 Bars ·Inconel 718 Bars ·Inconel 725 Bars ·Inconel 751 Bars