We could produce UNS N09901 bars, UNS NO9901 bars,UNS N09901 round bars, UNS N09901 rods,UNS N09901 square bars,UNS N09901 flat bars,UNS N09901 hot rolled bars, UNS NO9901 cold drawn bright bars,UNS NO9901 forged bars, UNS N09901 forging bars,UNS N0990 Hexagon Bar,UNS N09901 rectangular bars from china.

We could produce UNS N09901 bars with diamter from from 5MM to 1000MM and length up to 15 metres

UNS N09901 A nickel-iron-chromium alloy containing titanium and aluminum for precipitation hardening and molybdenum for solid-solution strengthening.

The chemical composition of UNS N09901 bars is as follows

Element	Content (%)
Nickel, Ni	41-43 .5
Chromium, Cr	11-14
Titanium, Ti	2.2-2.75
Silicon, Si	1 max
Manganese, Mn	0.8 max
Copper, Cu	0.5 max
Aluminum, Al	0.35 max
Carbon, C	0.1 max
Phosphorus, P	0.04 max
Sulfur, S	0.04 max
Boron, B	0.01 - 0.02
Iron, Fe	Remainder

The mechanical property of UNS NO9901 bars is as follows

Test  Temperature		0.2% Offset  Yield Strength		Ultimate  Tensile Strength		% Elongation  in 2"	% Reduction  of Area
°F	°C	ksi	MPa	ksi	MPa
70  800  1000  1200  1300  1400  1500	21.1  427  538  649  704  760  816	125.0  116.5  113  117  114  102.5  79	862  803  779  807  786  707  545	175  159  156  150  130  107.5  81	1207  1096  1076  1034  896  741  559	15.0  16.0  17.0  14.0  11.5  9.0  13.0	19.0  25.5  29.0  21.0  15.5  14.5  20.0

We could produce UNS N09901 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of UNS N09901 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS N09901 bar

As per heat treatment of UNS N09901 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply UNS N09901 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of UNS NO9901 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of UNS N09901 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our UNS N09901 bars are widely used in Power,Petrochemical,Agro chemicals,Paper and Pulp Industries,Engineering and Construction,Automotive,Drilling and Well Building,Chemical,Power Plants,Research and Technology,Architecture,Food & Beverages,Aircraft and Aerospace,Oil and Gas,Paper and Pulp,Pharmaceutical & Biochemistry ,Pneumatic Conveyor Systems,Pumps,Ship Building,Water Treatment Plants and so on

In order to export our UNS NO9901 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of UNS N09901 bars UNS N09901 round bars, UNS NO9901 rods,that you need, we are glad to quote the best price for you

Except UNS N09901 bars,we also could produce UNS N09901 flanges,UNS N09901 plates,UNS N09901 fastener,UNS N09901 bolts,UNS N09901 fittings,UNS N09901 pipes,UNS N09901 tubes,UNS N09901 springs